[PATCH v2 04/27] dt-bindings: display: sunxi-drm: Add TCON TOP description

[maxime.ripard@bootlin.com (Maxime Ripard)]

Hi,

Thanks for working on this!

On Tue, Jun 12, 2018 at 10:00:13PM +0200, Jernej Skrabec wrote:
> TCON TOP main purpose is to configure whole display pipeline. It
> determines relationships between mixers and TCONs, selects source TCON
> for HDMI, muxes LCD and TV encoder GPIO output, selects TV encoder
> clock source and contains additional TV TCON and DSI gates.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
>  .../bindings/display/sunxi/sun4i-drm.txt      | 45 +++++++++++++++++++
>  include/dt-bindings/clock/sun8i-tcon-top.h    | 11 +++++
>  2 files changed, 56 insertions(+)
>  create mode 100644 include/dt-bindings/clock/sun8i-tcon-top.h
> 
> diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> index 3346c1e2a7a0..ef64c589a4b3 100644
> --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> @@ -187,6 +187,51 @@ And on the A23, A31, A31s and A33, you need one more clock line:
>     - 'lvds-alt': An alternative clock source, separate from the TCON channel 0
>                   clock, that can be used to drive the LVDS clock
>  
> +TCON TOP
> +--------
> +
> +TCON TOPs main purpose is to configure whole display pipeline. It determines
> +relationships between mixers and TCONs, selects source TCON for HDMI, muxes
> +LCD and TV encoder GPIO output, selects TV encoder clock source and contains
> +additional TV TCON and DSI gates.
> +
> +It allows display pipeline to be configured in very different ways:
> +
> +                             / LCD0/LVDS0
> +                 / TCON-LCD0
> +                 |           \ MIPI DSI
> + mixer0          |
> +        \        / TCON-LCD1 - LCD1/LVDS1
> +         TCON-TOP
> +        /        \ TCON-TV0 - TVE0/RGB
> + mixer1          |          \
> +                 |           TCON-TOP - HDMI
> +                 |          /
> +                 \ TCON-TV1 - TVE1/RGB
> +
> +Note that both TCON TOP references same physical unit.
> +
> +Required properties:
> +  - compatible: value must be one of:
> +    * allwinner,sun8i-r40-tcon-top
> +  - reg: base address and size of the memory-mapped region.
> +  - clocks: phandle to the clocks feeding the TCON TOP
> +    * bus: TCON TOP interface clock
> +  - clock-names: clock name mentioned above
> +  - resets: phandle to the reset line driving the DRC

s/DRC/TCON TOP/ ?

> +    * rst: TCON TOP reset line

Remaining consistent with the clock name would be great

> +  - reset-names: reset name mentioned above
> +  - #clock-cells : must contain 1

An example would be nice here

> +- ports: A ports node with endpoint definitions as defined in
> +    Documentation/devicetree/bindings/media/video-interfaces.txt. The first port
> +    should be the input for mixer0 mux. The second should be the output for that
> +    mux. Third port should be input for mixer1 mux. Fourth port should be output
> +    for mixer1 mux. Fifth port should be input for HDMI mux. Sixth port should
> +    be output for it. All output endpoints should have reg property with the id
> +    of the target TCON. All ports should have only one enpoint connected to

                                                          ^ endpoint

I guess it would me more readable if you were to make it a bullet
list, but this works for me otherwise.

Thanks!
Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180613/22350a8e/attachment.sig>