From: viresh.kumar@linaro.org (Viresh Kumar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM: dts: rockchip: convert rk3288 to operating-points-v2
Date: Mon, 18 Jun 2018 15:53:09 +0530 [thread overview]
Message-ID: <20180618102309.qcwdxmid5pyarfbf@vireshk-i7> (raw)
In-Reply-To: <20180618100519.14922-1-heiko@sntech.de>
On 18-06-18, 12:05, Heiko Stuebner wrote:
> Operating points need to be present in each cpu core using it, not only
> the first one. With operating-points-v1 this would require duplicating
> this table into each cpu node.
>
> With opp-v2 we can share the same table on all nodes.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> changes in v2:
> - adapt opp node names as suggested by Viresh
>
> arch/arm/boot/dts/rk3288-veyron.dtsi | 36 +++++++-------
> arch/arm/boot/dts/rk3288.dtsi | 70 ++++++++++++++++++++++------
> 2 files changed, 75 insertions(+), 31 deletions(-)
>
> diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
> index 823c7ed47fcf..2075120cfc4d 100644
> --- a/arch/arm/boot/dts/rk3288-veyron.dtsi
> +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
> @@ -91,22 +91,26 @@
>
> &cpu0 {
> cpu0-supply = <&vdd_cpu>;
> - operating-points = <
> - /* KHz uV */
> - 1800000 1400000
> - 1704000 1350000
> - 1608000 1300000
> - 1512000 1250000
> - 1416000 1200000
> - 1200000 1100000
> - 1008000 1050000
> - 816000 1000000
> - 696000 950000
> - 600000 900000
> - 408000 900000
> - 216000 900000
> - 126000 900000
> - >;
> +};
> +
> +/* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */
> +&cpu_opp_table {
> + /delete-node/ opp-312000000;
> +
> + opp-1512000000 {
> + opp-microvolt = <1250000>;
> + };
> + opp-1608000000 {
> + opp-microvolt = <1300000>;
> + };
> + opp-1704000000 {
> + opp-hz = /bits/ 64 <1704000000>;
> + opp-microvolt = <1350000>;
> + };
> + opp-1800000000 {
> + opp-hz = /bits/ 64 <1800000000>;
> + opp-microvolt = <1400000>;
> + };
> };
>
> &emmc {
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 2a060c2dc383..7094f95b967f 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -60,21 +60,7 @@
> compatible = "arm,cortex-a12";
> reg = <0x500>;
> resets = <&cru SRST_CORE0>;
> - operating-points = <
> - /* KHz uV */
> - 1608000 1350000
> - 1512000 1300000
> - 1416000 1200000
> - 1200000 1100000
> - 1008000 1050000
> - 816000 1000000
> - 696000 950000
> - 600000 900000
> - 408000 900000
> - 312000 900000
> - 216000 900000
> - 126000 900000
> - >;
> + operating-points-v2 = <&cpu_opp_table>;
> #cooling-cells = <2>; /* min followed by max */
> clock-latency = <40000>;
> clocks = <&cru ARMCLK>;
> @@ -99,6 +85,60 @@
> };
> };
>
> + cpu_opp_table: cpu-opp-table {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-126000000 {
> + opp-hz = /bits/ 64 <126000000>;
> + opp-microvolt = <900000>;
> + };
> + opp-216000000 {
> + opp-hz = /bits/ 64 <216000000>;
> + opp-microvolt = <900000>;
> + };
> + opp-312000000 {
> + opp-hz = /bits/ 64 <312000000>;
> + opp-microvolt = <900000>;
> + };
> + opp-408000000 {
> + opp-hz = /bits/ 64 <408000000>;
> + opp-microvolt = <900000>;
> + };
> + opp-600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <900000>;
> + };
> + opp-696000000 {
> + opp-hz = /bits/ 64 <696000000>;
> + opp-microvolt = <950000>;
> + };
> + opp-816000000 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <1000000>;
> + };
> + opp-1008000000 {
> + opp-hz = /bits/ 64 <1008000000>;
> + opp-microvolt = <1050000>;
> + };
> + opp-1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <1100000>;
> + };
> + opp-1416000000 {
> + opp-hz = /bits/ 64 <1416000000>;
> + opp-microvolt = <1200000>;
> + };
> + opp-1512000000 {
> + opp-hz = /bits/ 64 <1512000000>;
> + opp-microvolt = <1300000>;
> + };
> + opp-1608000000 {
> + opp-hz = /bits/ 64 <1608000000>;
> + opp-microvolt = <1350000>;
> + };
> + };
> +
> amba {
> compatible = "simple-bus";
> #address-cells = <2>;
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
prev parent reply other threads:[~2018-06-18 10:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-18 10:05 [PATCH v2] ARM: dts: rockchip: convert rk3288 to operating-points-v2 Heiko Stuebner
2018-06-18 10:23 ` Viresh Kumar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180618102309.qcwdxmid5pyarfbf@vireshk-i7 \
--to=viresh.kumar@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox