[PATCH v3 00/14] ARM: pxa: switch to DMA slave maps

[PATCH v3 00/14] ARM: pxa: switch to DMA slave maps

[Robert Jarzmik]

As I gathered almost all the required acks, this is an information only post
before queuing to the PXA tree.

The only missing part is for netdev, for which I'd like an ack from netdev
people for patches 0007 and 0008, but that won't prevent me from queuing all the
other patches (excepting the patch 0012 which can only be applied once 0007 and
0008 are queued).

Cheers.

--
Robert

Robert Jarzmik (14):
  dmaengine: pxa: use a dma slave map
  ARM: pxa: add dma slave map
  dmaengine: pxa: add a default requestor policy
  mmc: pxamci: remove the dmaengine compat need
  media: pxa_camera: remove the dmaengine compat need
  mtd: rawnand: marvell: remove the dmaengine compat need
  net: smc911x: remove the dmaengine compat need
  net: smc91x: remove the dmaengine compat need
  ASoC: pxa: remove the dmaengine compat need
  ata: pata_pxa: remove the dmaengine compat need
  dmaengine: pxa: document pxad_param
  dmaengine: pxa: make the filter function internal
  ARM: pxa: remove the DMA IO resources
  ARM: pxa: change SSP DMA channels allocation

 arch/arm/mach-pxa/devices.c           | 148 +---------------------------------
 arch/arm/mach-pxa/devices.h           |   6 +-
 arch/arm/mach-pxa/pxa25x.c            |  38 ++++++++-
 arch/arm/mach-pxa/pxa27x.c            |  39 ++++++++-
 arch/arm/mach-pxa/pxa3xx.c            |  41 +++++++++-
 arch/arm/plat-pxa/ssp.c               |  47 -----------
 drivers/ata/pata_pxa.c                |  10 +--
 drivers/dma/pxa_dma.c                 |  18 ++++-
 drivers/media/platform/pxa_camera.c   |  22 +----
 drivers/mmc/host/pxamci.c             |  29 +------
 drivers/mtd/nand/raw/marvell_nand.c   |  17 +---
 drivers/net/ethernet/smsc/smc911x.c   |  13 +--
 drivers/net/ethernet/smsc/smc91x.c    |   9 +--
 drivers/net/ethernet/smsc/smc91x.h    |   1 -
 include/linux/dma/pxa-dma.h           |  20 +++--
 include/linux/platform_data/mmp_dma.h |   4 +
 include/linux/pxa2xx_ssp.h            |   2 -
 sound/arm/pxa2xx-ac97.c               |  14 +---
 sound/arm/pxa2xx-pcm-lib.c            |   6 +-
 sound/soc/pxa/pxa-ssp.c               |   5 +-
 sound/soc/pxa/pxa2xx-ac97.c           |  32 ++------
 sound/soc/pxa/pxa2xx-i2s.c            |   6 +-
 22 files changed, 176 insertions(+), 351 deletions(-)

-- 
2.11.0

[PATCH v3 01/14] dmaengine: pxa: use a dma slave map

[Robert Jarzmik]

In order to remove the specific knowledge of the dma mapping from PXA
drivers, add a default slave map for pxa architectures.

This won't impact MMP architecture, but is aimed only at all PXA boards.

This is the first step, and once all drivers are converted,
pxad_filter_fn() will be made static, and the DMA resources removed from
device.c.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/dma/pxa_dma.c                 | 10 +++++++++-
 include/linux/platform_data/mmp_dma.h |  4 ++++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index b53fb618bbf6..9505334f9c6e 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -179,6 +179,8 @@ static unsigned int pxad_drcmr(unsigned int line)
 	return 0x1000 + line * 4;
 }
 
+bool pxad_filter_fn(struct dma_chan *chan, void *param);
+
 /*
  * Debug fs
  */
@@ -1396,9 +1398,10 @@ static int pxad_probe(struct platform_device *op)
 {
 	struct pxad_device *pdev;
 	const struct of_device_id *of_id;
+	const struct dma_slave_map *slave_map = NULL;
 	struct mmp_dma_platdata *pdata = dev_get_platdata(&op->dev);
 	struct resource *iores;
-	int ret, dma_channels = 0, nb_requestors = 0;
+	int ret, dma_channels = 0, nb_requestors = 0, slave_map_cnt = 0;
 	const enum dma_slave_buswidth widths =
 		DMA_SLAVE_BUSWIDTH_1_BYTE   | DMA_SLAVE_BUSWIDTH_2_BYTES |
 		DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -1429,6 +1432,8 @@ static int pxad_probe(struct platform_device *op)
 	} else if (pdata && pdata->dma_channels) {
 		dma_channels = pdata->dma_channels;
 		nb_requestors = pdata->nb_requestors;
+		slave_map = pdata->slave_map;
+		slave_map_cnt = pdata->slave_map_cnt;
 	} else {
 		dma_channels = 32;	/* default 32 channel */
 	}
@@ -1440,6 +1445,9 @@ static int pxad_probe(struct platform_device *op)
 	pdev->slave.device_prep_dma_memcpy = pxad_prep_memcpy;
 	pdev->slave.device_prep_slave_sg = pxad_prep_slave_sg;
 	pdev->slave.device_prep_dma_cyclic = pxad_prep_dma_cyclic;
+	pdev->slave.filter.map = slave_map;
+	pdev->slave.filter.mapcnt = slave_map_cnt;
+	pdev->slave.filter.fn = pxad_filter_fn;
 
 	pdev->slave.copy_align = PDMA_ALIGNMENT;
 	pdev->slave.src_addr_widths = widths;
diff --git a/include/linux/platform_data/mmp_dma.h b/include/linux/platform_data/mmp_dma.h
index d1397c8ed94e..6397b9c8149a 100644
--- a/include/linux/platform_data/mmp_dma.h
+++ b/include/linux/platform_data/mmp_dma.h
@@ -12,9 +12,13 @@
 #ifndef MMP_DMA_H
 #define MMP_DMA_H
 
+struct dma_slave_map;
+
 struct mmp_dma_platdata {
 	int dma_channels;
 	int nb_requestors;
+	int slave_map_cnt;
+	const struct dma_slave_map *slave_map;
 };
 
 #endif /* MMP_DMA_H */
-- 
2.11.0

[PATCH v3 02/14] ARM: pxa: add dma slave map

[Robert Jarzmik]

In order to remove the specific knowledge of the dma mapping from PXA
drivers, add a default slave map for pxa architectures.

This is the first step, and once all drivers are converted,
pxad_filter_fn() will be made static, and the DMA resources removed from
device.c.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reported-by: Arnd Bergmann <arnd@arndb.de>
---
Since v1: revamped the SSP part, split into pxa25.c, pxa27x.c and
          pxa3xx.c, and add pxa-i2s.
---
 arch/arm/mach-pxa/devices.c | 12 +++---------
 arch/arm/mach-pxa/devices.h |  6 +++++-
 arch/arm/mach-pxa/pxa25x.c  | 38 +++++++++++++++++++++++++++++++++++++-
 arch/arm/mach-pxa/pxa27x.c  | 39 ++++++++++++++++++++++++++++++++++++++-
 arch/arm/mach-pxa/pxa3xx.c  | 41 ++++++++++++++++++++++++++++++++++++++++-
 5 files changed, 123 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index d7c9a8476d57..1e8915fc340d 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,6 +4,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/platform_data/i2c-pxa.h>
 
@@ -1202,11 +1203,6 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
 	platform_device_add(pd);
 }
 
-static struct mmp_dma_platdata pxa_dma_pdata = {
-	.dma_channels	= 0,
-	.nb_requestors	= 0,
-};
-
 static struct resource pxa_dma_resource[] = {
 	[0] = {
 		.start	= 0x40000000,
@@ -1233,9 +1229,7 @@ static struct platform_device pxa2xx_pxa_dma = {
 	.resource	= pxa_dma_resource,
 };
 
-void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
+void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata)
 {
-	pxa_dma_pdata.dma_channels = nb_channels;
-	pxa_dma_pdata.nb_requestors = nb_requestors;
-	pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
+	pxa_register_device(&pxa2xx_pxa_dma, dma_pdata);
 }
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 11263f7c455b..498b07bc6a3e 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -1,4 +1,8 @@
 /* SPDX-License-Identifier: GPL-2.0 */
+#define PDMA_FILTER_PARAM(_prio, _requestor) (&(struct pxad_param) { \
+	.prio = PXAD_PRIO_##_prio, .drcmr = _requestor })
+struct mmp_dma_platdata;
+
 extern struct platform_device pxa_device_pmu;
 extern struct platform_device pxa_device_mci;
 extern struct platform_device pxa3xx_device_mci2;
@@ -55,7 +59,7 @@ extern struct platform_device pxa3xx_device_gpio;
 extern struct platform_device pxa93x_device_gpio;
 
 void __init pxa_register_device(struct platform_device *dev, void *data);
-void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
+void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata);
 
 struct i2c_pxa_platform_data;
 extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index ba431fad5c47..ab8808ce7e21 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -16,6 +16,8 @@
  * initialization stuff for PXA machines which can be overridden later if
  * need be.
  */
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
 #include <linux/gpio.h>
 #include <linux/gpio-pxa.h>
 #include <linux/module.h>
@@ -26,6 +28,7 @@
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
 #include <linux/irqchip.h>
+#include <linux/platform_data/mmp_dma.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
@@ -201,6 +204,39 @@ static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa_device_asoc_platform,
 };
 
+static const struct dma_slave_map pxa25x_slave_map[] = {
+	/* PXA25x, PXA27x and PXA3xx common entries */
+	{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
+	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
+	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
+	  PDMA_FILTER_PARAM(LOWEST, 10) },
+	{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
+	{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
+	{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+	{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+	{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+	{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+	{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
+	{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
+	{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
+	{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
+
+	/* PXA25x specific map */
+	{ "pxa25x-ssp.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+	{ "pxa25x-ssp.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+	{ "pxa25x-nssp.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+	{ "pxa25x-nssp.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+	{ "pxa25x-nssp.2", "rx", PDMA_FILTER_PARAM(LOWEST, 23) },
+	{ "pxa25x-nssp.2", "tx", PDMA_FILTER_PARAM(LOWEST, 24) },
+};
+
+static struct mmp_dma_platdata pxa25x_dma_pdata = {
+	.dma_channels	= 16,
+	.nb_requestors	= 40,
+	.slave_map	= pxa25x_slave_map,
+	.slave_map_cnt	= ARRAY_SIZE(pxa25x_slave_map),
+};
+
 static int __init pxa25x_init(void)
 {
 	int ret = 0;
@@ -215,7 +251,7 @@ static int __init pxa25x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
 		if (!of_have_populated_dt()) {
-			pxa2xx_set_dmac_info(16, 40);
+			pxa2xx_set_dmac_info(&pxa25x_dma_pdata);
 			pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
 			ret = platform_add_devices(pxa25x_devices,
 						   ARRAY_SIZE(pxa25x_devices));
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 0c06f383ad52..5a8990a9313d 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -11,6 +11,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
 #include <linux/gpio.h>
 #include <linux/gpio-pxa.h>
 #include <linux/module.h>
@@ -23,6 +25,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/platform_data/i2c-pxa.h>
+#include <linux/platform_data/mmp_dma.h>
 
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
@@ -297,6 +300,40 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_pwm1,
 };
 
+static const struct dma_slave_map pxa27x_slave_map[] = {
+	/* PXA25x, PXA27x and PXA3xx common entries */
+	{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
+	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
+	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
+	  PDMA_FILTER_PARAM(LOWEST, 10) },
+	{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
+	{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
+	{ "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+	{ "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+	{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+	{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+	{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
+	{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
+	{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
+	{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
+	{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
+	{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
+
+	/* PXA27x specific map */
+	{ "pxa2xx-i2s", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
+	{ "pxa2xx-i2s", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
+	{ "pxa27x-camera.0", "CI_Y", PDMA_FILTER_PARAM(HIGHEST, 68) },
+	{ "pxa27x-camera.0", "CI_U", PDMA_FILTER_PARAM(HIGHEST, 69) },
+	{ "pxa27x-camera.0", "CI_V", PDMA_FILTER_PARAM(HIGHEST, 70) },
+};
+
+static struct mmp_dma_platdata pxa27x_dma_pdata = {
+	.dma_channels	= 32,
+	.nb_requestors	= 75,
+	.slave_map	= pxa27x_slave_map,
+	.slave_map_cnt	= ARRAY_SIZE(pxa27x_slave_map),
+};
+
 static int __init pxa27x_init(void)
 {
 	int ret = 0;
@@ -313,7 +350,7 @@ static int __init pxa27x_init(void)
 		if (!of_have_populated_dt()) {
 			pxa_register_device(&pxa27x_device_gpio,
 					    &pxa27x_gpio_info);
-			pxa2xx_set_dmac_info(32, 75);
+			pxa2xx_set_dmac_info(&pxa27x_dma_pdata);
 			ret = platform_add_devices(devices,
 						   ARRAY_SIZE(devices));
 		}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 4b8a0df8ea57..22ff8ce6761c 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -12,6 +12,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -24,6 +26,7 @@
 #include <linux/of.h>
 #include <linux/syscore_ops.h>
 #include <linux/platform_data/i2c-pxa.h>
+#include <linux/platform_data/mmp_dma.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
@@ -421,6 +424,42 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_pwm1,
 };
 
+static const struct dma_slave_map pxa3xx_slave_map[] = {
+	/* PXA25x, PXA27x and PXA3xx common entries */
+	{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
+	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
+	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
+	  PDMA_FILTER_PARAM(LOWEST, 10) },
+	{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
+	{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
+	{ "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+	{ "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+	{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+	{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+	{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
+	{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
+	{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
+	{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
+	{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
+	{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
+
+	/* PXA3xx specific map */
+	{ "pxa-ssp-dai.3", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
+	{ "pxa-ssp-dai.3", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
+	{ "pxa2xx-mci.1", "rx", PDMA_FILTER_PARAM(LOWEST, 93) },
+	{ "pxa2xx-mci.1", "tx", PDMA_FILTER_PARAM(LOWEST, 94) },
+	{ "pxa3xx-nand", "data", PDMA_FILTER_PARAM(LOWEST, 97) },
+	{ "pxa2xx-mci.2", "rx", PDMA_FILTER_PARAM(LOWEST, 100) },
+	{ "pxa2xx-mci.2", "tx", PDMA_FILTER_PARAM(LOWEST, 101) },
+};
+
+static struct mmp_dma_platdata pxa3xx_dma_pdata = {
+	.dma_channels	= 32,
+	.nb_requestors	= 100,
+	.slave_map	= pxa3xx_slave_map,
+	.slave_map_cnt	= ARRAY_SIZE(pxa3xx_slave_map),
+};
+
 static int __init pxa3xx_init(void)
 {
 	int ret = 0;
@@ -452,7 +491,7 @@ static int __init pxa3xx_init(void)
 		if (of_have_populated_dt())
 			return 0;
 
-		pxa2xx_set_dmac_info(32, 100);
+		pxa2xx_set_dmac_info(&pxa3xx_dma_pdata);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 		if (ret)
 			return ret;
-- 
2.11.0

[PATCH v3 03/14] dmaengine: pxa: add a default requestor policy

[Robert Jarzmik]

As what former drcmr -1 value meant, add a this as a default to each
channel, ie. that by default no requestor line is used.

This is specifically used for network drivers smc91x and smc911x, and
needed for their port to slave maps.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
Since v1: changed -1 to U32_MAX
---
 drivers/dma/pxa_dma.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index 9505334f9c6e..b31c28b67ad3 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -762,6 +762,8 @@ static void pxad_free_chan_resources(struct dma_chan *dchan)
 	dma_pool_destroy(chan->desc_pool);
 	chan->desc_pool = NULL;
 
+	chan->drcmr = U32_MAX;
+	chan->prio = PXAD_PRIO_LOWEST;
 }
 
 static void pxad_free_desc(struct virt_dma_desc *vd)
@@ -1386,6 +1388,9 @@ static int pxad_init_dmadev(struct platform_device *op,
 		c = devm_kzalloc(&op->dev, sizeof(*c), GFP_KERNEL);
 		if (!c)
 			return -ENOMEM;
+
+		c->drcmr = U32_MAX;
+		c->prio = PXAD_PRIO_LOWEST;
 		c->vc.desc_free = pxad_free_desc;
 		vchan_init(&c->vc, &pdev->slave);
 		init_waitqueue_head(&c->wq_state);
-- 
2.11.0

[PATCH v3 04/14] mmc: pxamci: remove the dmaengine compat need

[Robert Jarzmik]

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/mmc/host/pxamci.c | 29 +++--------------------------
 1 file changed, 3 insertions(+), 26 deletions(-)

diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index c763b404510f..6c94474e36f4 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -24,7 +24,6 @@
 #include <linux/interrupt.h>
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
-#include <linux/dma/pxa-dma.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/mmc/host.h>
@@ -637,10 +636,8 @@ static int pxamci_probe(struct platform_device *pdev)
 {
 	struct mmc_host *mmc;
 	struct pxamci_host *host = NULL;
-	struct resource *r, *dmarx, *dmatx;
-	struct pxad_param param_rx, param_tx;
+	struct resource *r;
 	int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
-	dma_cap_mask_t mask;
 
 	ret = pxamci_of_init(pdev);
 	if (ret)
@@ -739,34 +736,14 @@ static int pxamci_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mmc);
 
-	if (!pdev->dev.of_node) {
-		dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-		dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-		if (!dmarx || !dmatx) {
-			ret = -ENXIO;
-			goto out;
-		}
-		param_rx.prio = PXAD_PRIO_LOWEST;
-		param_rx.drcmr = dmarx->start;
-		param_tx.prio = PXAD_PRIO_LOWEST;
-		param_tx.drcmr = dmatx->start;
-	}
-
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-
-	host->dma_chan_rx =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param_rx, &pdev->dev, "rx");
+	host->dma_chan_rx = dma_request_slave_channel(&pdev->dev, "rx");
 	if (host->dma_chan_rx == NULL) {
 		dev_err(&pdev->dev, "unable to request rx dma channel\n");
 		ret = -ENODEV;
 		goto out;
 	}
 
-	host->dma_chan_tx =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param_tx,  &pdev->dev, "tx");
+	host->dma_chan_tx = dma_request_slave_channel(&pdev->dev, "tx");
 	if (host->dma_chan_tx == NULL) {
 		dev_err(&pdev->dev, "unable to request tx dma channel\n");
 		ret = -ENODEV;
-- 
2.11.0

[PATCH v3 05/14] media: pxa_camera: remove the dmaengine compat need

[Robert Jarzmik]

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 drivers/media/platform/pxa_camera.c | 22 +++-------------------
 1 file changed, 3 insertions(+), 19 deletions(-)

diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c
index c71a00736541..4c82d1880753 100644
--- a/drivers/media/platform/pxa_camera.c
+++ b/drivers/media/platform/pxa_camera.c
@@ -2357,8 +2357,6 @@ static int pxa_camera_probe(struct platform_device *pdev)
 		.src_maxburst = 8,
 		.direction = DMA_DEV_TO_MEM,
 	};
-	dma_cap_mask_t mask;
-	struct pxad_param params;
 	char clk_name[V4L2_CLK_NAME_SIZE];
 	int irq;
 	int err = 0, i;
@@ -2432,34 +2430,20 @@ static int pxa_camera_probe(struct platform_device *pdev)
 	pcdev->base = base;
 
 	/* request dma */
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	dma_cap_set(DMA_PRIVATE, mask);
-
-	params.prio = 0;
-	params.drcmr = 68;
-	pcdev->dma_chans[0] =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &params, &pdev->dev, "CI_Y");
+	pcdev->dma_chans[0] = dma_request_slave_channel(&pdev->dev, "CI_Y");
 	if (!pcdev->dma_chans[0]) {
 		dev_err(&pdev->dev, "Can't request DMA for Y\n");
 		return -ENODEV;
 	}
 
-	params.drcmr = 69;
-	pcdev->dma_chans[1] =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &params, &pdev->dev, "CI_U");
+	pcdev->dma_chans[1] = dma_request_slave_channel(&pdev->dev, "CI_U");
 	if (!pcdev->dma_chans[1]) {
 		dev_err(&pdev->dev, "Can't request DMA for Y\n");
 		err = -ENODEV;
 		goto exit_free_dma_y;
 	}
 
-	params.drcmr = 70;
-	pcdev->dma_chans[2] =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &params, &pdev->dev, "CI_V");
+	pcdev->dma_chans[2] = dma_request_slave_channel(&pdev->dev, "CI_V");
 	if (!pcdev->dma_chans[2]) {
 		dev_err(&pdev->dev, "Can't request DMA for V\n");
 		err = -ENODEV;
-- 
2.11.0

[PATCH v3 06/14] mtd: rawnand: marvell: remove the dmaengine compat need

[Robert Jarzmik]

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/marvell_nand.c | 17 +----------------
 1 file changed, 1 insertion(+), 16 deletions(-)

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 10e953218948..64618254d6de 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2613,8 +2613,6 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
 						    dev);
 	struct dma_slave_config config = {};
 	struct resource *r;
-	dma_cap_mask_t mask;
-	struct pxad_param param;
 	int ret;
 
 	if (!IS_ENABLED(CONFIG_PXA_DMA)) {
@@ -2627,20 +2625,7 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
 	if (ret)
 		return ret;
 
-	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!r) {
-		dev_err(nfc->dev, "No resource defined for data DMA\n");
-		return -ENXIO;
-	}
-
-	param.drcmr = r->start;
-	param.prio = PXAD_PRIO_LOWEST;
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	nfc->dma_chan =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param, nfc->dev,
-						 "data");
+	nfc->dma_chan =	dma_request_slave_channel(nfc->dev, "data");
 	if (!nfc->dma_chan) {
 		dev_err(nfc->dev,
 			"Unable to request data DMA channel\n");
-- 
2.11.0

[PATCH v3 06/14] mtd: rawnand: marvell: remove the dmaengine compat need

[Daniel Mack]

On Sunday, June 17, 2018 07:02 PM, Robert Jarzmik wrote:
> As the pxa architecture switched towards the dmaengine slave map, the
> old compatibility mechanism to acquire the dma requestor line number and
> priority are not needed anymore.
> 
> This patch simplifies the dma resource acquisition, using the more
> generic function dma_request_slave_channel().
> 
> Signed-off-by: Signed-off-by: Daniel Mack <daniel@zonque.org>

Something went wrong here, but you can simply fix that when applying the 
series :)


Daniel

> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>   drivers/mtd/nand/raw/marvell_nand.c | 17 +----------------
>   1 file changed, 1 insertion(+), 16 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
> index 10e953218948..64618254d6de 100644
> --- a/drivers/mtd/nand/raw/marvell_nand.c
> +++ b/drivers/mtd/nand/raw/marvell_nand.c
> @@ -2613,8 +2613,6 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
>   						    dev);
>   	struct dma_slave_config config = {};
>   	struct resource *r;
> -	dma_cap_mask_t mask;
> -	struct pxad_param param;
>   	int ret;
>   
>   	if (!IS_ENABLED(CONFIG_PXA_DMA)) {
> @@ -2627,20 +2625,7 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
>   	if (ret)
>   		return ret;
>   
> -	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
> -	if (!r) {
> -		dev_err(nfc->dev, "No resource defined for data DMA\n");
> -		return -ENXIO;
> -	}
> -
> -	param.drcmr = r->start;
> -	param.prio = PXAD_PRIO_LOWEST;
> -	dma_cap_zero(mask);
> -	dma_cap_set(DMA_SLAVE, mask);
> -	nfc->dma_chan =
> -		dma_request_slave_channel_compat(mask, pxad_filter_fn,
> -						 &param, nfc->dev,
> -						 "data");
> +	nfc->dma_chan =	dma_request_slave_channel(nfc->dev, "data");
>   	if (!nfc->dma_chan) {
>   		dev_err(nfc->dev,
>   			"Unable to request data DMA channel\n");
> 

[PATCH v3 06/14] mtd: rawnand: marvell: remove the dmaengine compat need

[Robert Jarzmik]

Daniel Mack <daniel@zonque.org> writes:

> On Sunday, June 17, 2018 07:02 PM, Robert Jarzmik wrote:
>> As the pxa architecture switched towards the dmaengine slave map, the
>> old compatibility mechanism to acquire the dma requestor line number and
>> priority are not needed anymore.
>>
>> This patch simplifies the dma resource acquisition, using the more
>> generic function dma_request_slave_channel().
>>
>> Signed-off-by: Signed-off-by: Daniel Mack <daniel@zonque.org>
>
> Something went wrong here, but you can simply fix that when applying the series
> :)
Indeed, fixed before applying to the pxa/for-next tree.

--
Robert

[PATCH v3 07/14] net: smc911x: remove the dmaengine compat need

[Robert Jarzmik]

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
Since v2: converted to NULL filter function and NULL dma parameter call
---
 drivers/net/ethernet/smsc/smc911x.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index 05157442a980..b1b53f6c452f 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -74,7 +74,6 @@ static const char version[] =
 #include <linux/skbuff.h>
 
 #include <linux/dmaengine.h>
-#include <linux/dma/pxa-dma.h>
 
 #include <asm/io.h>
 
@@ -1795,7 +1794,6 @@ static int smc911x_probe(struct net_device *dev)
 #ifdef SMC_USE_DMA
 	struct dma_slave_config	config;
 	dma_cap_mask_t mask;
-	struct pxad_param param;
 #endif
 
 	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
@@ -1971,15 +1969,8 @@ static int smc911x_probe(struct net_device *dev)
 
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
-	param.prio = PXAD_PRIO_LOWEST;
-	param.drcmr = -1UL;
-
-	lp->rxdma =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param, &dev->dev, "rx");
-	lp->txdma =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param, &dev->dev, "tx");
+	lp->rxdma = dma_request_channel(mask, NULL, NULL);
+	lp->txdma = dma_request_channel(mask, NULL, NULL);
 	lp->rxdma_active = 0;
 	lp->txdma_active = 0;
 
-- 
2.11.0

[PATCH v3 08/14] net: smc91x: remove the dmaengine compat need

[Robert Jarzmik]

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
Since v2: converted to NULL filter function and NULL dma parameter call
---
 drivers/net/ethernet/smsc/smc91x.c | 9 +--------
 drivers/net/ethernet/smsc/smc91x.h | 1 -
 2 files changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 080428762858..b944828f9ea3 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -2019,17 +2019,10 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 #  endif
 	if (lp->cfg.flags & SMC91X_USE_DMA) {
 		dma_cap_mask_t mask;
-		struct pxad_param param;
 
 		dma_cap_zero(mask);
 		dma_cap_set(DMA_SLAVE, mask);
-		param.prio = PXAD_PRIO_LOWEST;
-		param.drcmr = -1UL;
-
-		lp->dma_chan =
-			dma_request_slave_channel_compat(mask, pxad_filter_fn,
-							 &param, &dev->dev,
-							 "data");
+		lp->dma_chan = dma_request_channel(mask, NULL, NULL);
 	}
 #endif
 
diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index b337ee97e0c0..a27352229fc2 100644
--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -301,7 +301,6 @@ struct smc_local {
  * as RX which can overrun memory and lose packets.
  */
 #include <linux/dma-mapping.h>
-#include <linux/dma/pxa-dma.h>
 
 #ifdef SMC_insl
 #undef SMC_insl
-- 
2.11.0

[PATCH v3 09/14] ASoC: pxa: remove the dmaengine compat need

[Robert Jarzmik]

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Acked-by: Mark Brown <broonie@kernel.org>
---
 sound/arm/pxa2xx-ac97.c     | 14 ++------------
 sound/arm/pxa2xx-pcm-lib.c  |  6 +++---
 sound/soc/pxa/pxa2xx-ac97.c | 32 +++++---------------------------
 sound/soc/pxa/pxa2xx-i2s.c  |  6 ++----
 4 files changed, 12 insertions(+), 46 deletions(-)

diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 4bc244c40f80..236a63cdaf9f 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -63,28 +63,18 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
 	.reset	= pxa2xx_ac97_legacy_reset,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_out_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 12,
-};
-
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_out = {
 	.addr		= __PREG(PCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_out",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_ac97_pcm_out_req,
-};
-
-static struct pxad_param pxa2xx_ac97_pcm_in_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 11,
 };
 
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_in = {
 	.addr		= __PREG(PCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_in",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_ac97_pcm_in_req,
 };
 
 static struct snd_pcm *pxa2xx_ac97_pcm;
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index e8da3b8ee721..dcbe7ecc1835 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -125,9 +125,9 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream)
 	if (ret < 0)
 		return ret;
 
-	return snd_dmaengine_pcm_open_request_chan(substream,
-					pxad_filter_fn,
-					dma_params->filter_data);
+	return snd_dmaengine_pcm_open(
+		substream, dma_request_slave_channel(rtd->cpu_dai->dev,
+						     dma_params->chan_name));
 }
 EXPORT_SYMBOL(__pxa2xx_pcm_open);
 
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index 803818aabee9..1b41c0f2a8fb 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -68,61 +68,39 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
 	.reset	= pxa2xx_ac97_cold_reset,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_stereo_in_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 11,
-};
-
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = {
 	.addr		= __PREG(PCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_in",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_ac97_pcm_stereo_in_req,
-};
-
-static struct pxad_param pxa2xx_ac97_pcm_stereo_out_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 12,
 };
 
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = {
 	.addr		= __PREG(PCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_out",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_ac97_pcm_stereo_out_req,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_aux_mono_out_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 10,
-};
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = {
 	.addr		= __PREG(MODR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
+	.chan_name	= "pcm_aux_mono_out",
 	.maxburst	= 16,
-	.filter_data	= &pxa2xx_ac97_pcm_aux_mono_out_req,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_aux_mono_in_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 9,
-};
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = {
 	.addr		= __PREG(MODR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
+	.chan_name	= "pcm_aux_mono_in",
 	.maxburst	= 16,
-	.filter_data	= &pxa2xx_ac97_pcm_aux_mono_in_req,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_aux_mic_mono_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 8,
-};
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = {
 	.addr		= __PREG(MCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
+	.chan_name	= "pcm_aux_mic_mono",
 	.maxburst	= 16,
-	.filter_data	= &pxa2xx_ac97_pcm_aux_mic_mono_req,
 };
 
 static int pxa2xx_ac97_hifi_startup(struct snd_pcm_substream *substream,
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 3fb60baf6eab..e7184de0de04 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -82,20 +82,18 @@ static struct pxa_i2s_port pxa_i2s;
 static struct clk *clk_i2s;
 static int clk_ena = 0;
 
-static unsigned long pxa2xx_i2s_pcm_stereo_out_req = 3;
 static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = {
 	.addr		= __PREG(SADR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "tx",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_i2s_pcm_stereo_out_req,
 };
 
-static unsigned long pxa2xx_i2s_pcm_stereo_in_req = 2;
 static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = {
 	.addr		= __PREG(SADR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "rx",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_i2s_pcm_stereo_in_req,
 };
 
 static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
-- 
2.11.0

[PATCH v3 09/14] ASoC: pxa: remove the dmaengine compat need

[Daniel Mack]

Hi Mark,

I prepared a series of patches for 4.18 that conflict with this one. 
Instead of letting other people resolve this down the road, I'd prefer 
if this one went through the ASoC tree, if you don't mind.

I've talked to Robert off-list, and he's fine with this approach.


Thanks,
Daniel

On Sunday, June 17, 2018 07:02 PM, Robert Jarzmik wrote:
> As the pxa architecture switched towards the dmaengine slave map, the
> old compatibility mechanism to acquire the dma requestor line number and
> priority are not needed anymore.
> 
> This patch simplifies the dma resource acquisition, using the more
> generic function dma_request_slave_channel().
> 
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> Reviewed-by: Daniel Mack <daniel@zonque.org>
> Acked-by: Mark Brown <broonie@kernel.org>
> ---
>   sound/arm/pxa2xx-ac97.c     | 14 ++------------
>   sound/arm/pxa2xx-pcm-lib.c  |  6 +++---
>   sound/soc/pxa/pxa2xx-ac97.c | 32 +++++---------------------------
>   sound/soc/pxa/pxa2xx-i2s.c  |  6 ++----
>   4 files changed, 12 insertions(+), 46 deletions(-)
> 
> diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
> index 4bc244c40f80..236a63cdaf9f 100644
> --- a/sound/arm/pxa2xx-ac97.c
> +++ b/sound/arm/pxa2xx-ac97.c
> @@ -63,28 +63,18 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
>   	.reset	= pxa2xx_ac97_legacy_reset,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_out_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 12,
> -};
> -
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_out = {
>   	.addr		= __PREG(PCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "pcm_pcm_stereo_out",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_ac97_pcm_out_req,
> -};
> -
> -static struct pxad_param pxa2xx_ac97_pcm_in_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 11,
>   };
>   
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_in = {
>   	.addr		= __PREG(PCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "pcm_pcm_stereo_in",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_ac97_pcm_in_req,
>   };
>   
>   static struct snd_pcm *pxa2xx_ac97_pcm;
> diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
> index e8da3b8ee721..dcbe7ecc1835 100644
> --- a/sound/arm/pxa2xx-pcm-lib.c
> +++ b/sound/arm/pxa2xx-pcm-lib.c
> @@ -125,9 +125,9 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream)
>   	if (ret < 0)
>   		return ret;
>   
> -	return snd_dmaengine_pcm_open_request_chan(substream,
> -					pxad_filter_fn,
> -					dma_params->filter_data);
> +	return snd_dmaengine_pcm_open(
> +		substream, dma_request_slave_channel(rtd->cpu_dai->dev,
> +						     dma_params->chan_name));
>   }
>   EXPORT_SYMBOL(__pxa2xx_pcm_open);
>   
> diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
> index 803818aabee9..1b41c0f2a8fb 100644
> --- a/sound/soc/pxa/pxa2xx-ac97.c
> +++ b/sound/soc/pxa/pxa2xx-ac97.c
> @@ -68,61 +68,39 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
>   	.reset	= pxa2xx_ac97_cold_reset,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_stereo_in_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 11,
> -};
> -
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = {
>   	.addr		= __PREG(PCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "pcm_pcm_stereo_in",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_ac97_pcm_stereo_in_req,
> -};
> -
> -static struct pxad_param pxa2xx_ac97_pcm_stereo_out_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 12,
>   };
>   
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = {
>   	.addr		= __PREG(PCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "pcm_pcm_stereo_out",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_ac97_pcm_stereo_out_req,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mono_out_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 10,
> -};
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = {
>   	.addr		= __PREG(MODR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
> +	.chan_name	= "pcm_aux_mono_out",
>   	.maxburst	= 16,
> -	.filter_data	= &pxa2xx_ac97_pcm_aux_mono_out_req,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mono_in_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 9,
> -};
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = {
>   	.addr		= __PREG(MODR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
> +	.chan_name	= "pcm_aux_mono_in",
>   	.maxburst	= 16,
> -	.filter_data	= &pxa2xx_ac97_pcm_aux_mono_in_req,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mic_mono_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 8,
> -};
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = {
>   	.addr		= __PREG(MCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
> +	.chan_name	= "pcm_aux_mic_mono",
>   	.maxburst	= 16,
> -	.filter_data	= &pxa2xx_ac97_pcm_aux_mic_mono_req,
>   };
>   
>   static int pxa2xx_ac97_hifi_startup(struct snd_pcm_substream *substream,
> diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
> index 3fb60baf6eab..e7184de0de04 100644
> --- a/sound/soc/pxa/pxa2xx-i2s.c
> +++ b/sound/soc/pxa/pxa2xx-i2s.c
> @@ -82,20 +82,18 @@ static struct pxa_i2s_port pxa_i2s;
>   static struct clk *clk_i2s;
>   static int clk_ena = 0;
>   
> -static unsigned long pxa2xx_i2s_pcm_stereo_out_req = 3;
>   static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = {
>   	.addr		= __PREG(SADR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "tx",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_i2s_pcm_stereo_out_req,
>   };
>   
> -static unsigned long pxa2xx_i2s_pcm_stereo_in_req = 2;
>   static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = {
>   	.addr		= __PREG(SADR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "rx",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_i2s_pcm_stereo_in_req,
>   };
>   
>   static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
> 

[PATCH v3 09/14] ASoC: pxa: remove the dmaengine compat need

[Robert Jarzmik]

Daniel Mack <daniel@zonque.org> writes:

> Hi Mark,
>
> I prepared a series of patches for 4.18 that conflict with this one. Instead of
> letting other people resolve this down the road, I'd prefer if this one went
> through the ASoC tree, if you don't mind.
>
> I've talked to Robert off-list, and he's fine with this approach.
That's right.

I'll tentativaly queue this patch to my pxa/for-next tree. As soon as I hear
that Mark queued it up in his tree, I'll drop it from mine.

Cheers.

--
Robert

[PATCH v3 10/14] ata: pata_pxa: remove the dmaengine compat need

[Robert Jarzmik]

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/pata_pxa.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
index f6c46e9a4dc0..e8b6a2e464c9 100644
--- a/drivers/ata/pata_pxa.c
+++ b/drivers/ata/pata_pxa.c
@@ -25,7 +25,6 @@
 #include <linux/libata.h>
 #include <linux/platform_device.h>
 #include <linux/dmaengine.h>
-#include <linux/dma/pxa-dma.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/completion.h>
@@ -180,8 +179,6 @@ static int pxa_ata_probe(struct platform_device *pdev)
 	struct resource *irq_res;
 	struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct dma_slave_config	config;
-	dma_cap_mask_t mask;
-	struct pxad_param param;
 	int ret = 0;
 
 	/*
@@ -278,10 +275,6 @@ static int pxa_ata_probe(struct platform_device *pdev)
 
 	ap->private_data = data;
 
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	param.prio = PXAD_PRIO_LOWEST;
-	param.drcmr = pdata->dma_dreq;
 	memset(&config, 0, sizeof(config));
 	config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
@@ -294,8 +287,7 @@ static int pxa_ata_probe(struct platform_device *pdev)
 	 * Request the DMA channel
 	 */
 	data->dma_chan =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param, &pdev->dev, "data");
+		dma_request_slave_channel(&pdev->dev, "data");
 	if (!data->dma_chan)
 		return -EBUSY;
 	ret = dmaengine_slave_config(data->dma_chan, &config);
-- 
2.11.0

[PATCH v3 11/14] dmaengine: pxa: document pxad_param

[Robert Jarzmik]

Add some documentation for the pxad_param structure, and describe the
contract behind the minimal required priority of a DMA channel.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
Since v1: added Vinod's ack
---
 include/linux/dma/pxa-dma.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/linux/dma/pxa-dma.h b/include/linux/dma/pxa-dma.h
index e56ec7af4fd7..9fc594f69eff 100644
--- a/include/linux/dma/pxa-dma.h
+++ b/include/linux/dma/pxa-dma.h
@@ -9,6 +9,15 @@ enum pxad_chan_prio {
 	PXAD_PRIO_LOWEST,
 };
 
+/**
+ * struct pxad_param - dma channel request parameters
+ * @drcmr: requestor line number
+ * @prio: minimal mandatory priority of the channel
+ *
+ * If a requested channel is granted, its priority will be at least @prio,
+ * ie. if PXAD_PRIO_LOW is required, the requested channel will be either
+ * PXAD_PRIO_LOW, PXAD_PRIO_NORMAL or PXAD_PRIO_HIGHEST.
+ */
 struct pxad_param {
 	unsigned int drcmr;
 	enum pxad_chan_prio prio;
-- 
2.11.0

[PATCH v3 12/14] dmaengine: pxa: make the filter function internal

[Robert Jarzmik]

As the pxa architecture and all its related drivers do not rely anymore
on the filter function, thanks to the slave map conversion, make
pxad_filter_fn() static, and remove it from the global namespace.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
Since v1: added Vinod's ack
---
 drivers/dma/pxa_dma.c       |  5 ++---
 include/linux/dma/pxa-dma.h | 11 -----------
 2 files changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index b31c28b67ad3..0db29bd1b096 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -179,7 +179,7 @@ static unsigned int pxad_drcmr(unsigned int line)
 	return 0x1000 + line * 4;
 }
 
-bool pxad_filter_fn(struct dma_chan *chan, void *param);
+static bool pxad_filter_fn(struct dma_chan *chan, void *param);
 
 /*
  * Debug fs
@@ -1501,7 +1501,7 @@ static struct platform_driver pxad_driver = {
 	.remove		= pxad_remove,
 };
 
-bool pxad_filter_fn(struct dma_chan *chan, void *param)
+static bool pxad_filter_fn(struct dma_chan *chan, void *param)
 {
 	struct pxad_chan *c = to_pxad_chan(chan);
 	struct pxad_param *p = param;
@@ -1514,7 +1514,6 @@ bool pxad_filter_fn(struct dma_chan *chan, void *param)
 
 	return true;
 }
-EXPORT_SYMBOL_GPL(pxad_filter_fn);
 
 module_platform_driver(pxad_driver);
 
diff --git a/include/linux/dma/pxa-dma.h b/include/linux/dma/pxa-dma.h
index 9fc594f69eff..fceb5df07097 100644
--- a/include/linux/dma/pxa-dma.h
+++ b/include/linux/dma/pxa-dma.h
@@ -23,15 +23,4 @@ struct pxad_param {
 	enum pxad_chan_prio prio;
 };
 
-struct dma_chan;
-
-#ifdef CONFIG_PXA_DMA
-bool pxad_filter_fn(struct dma_chan *chan, void *param);
-#else
-static inline bool pxad_filter_fn(struct dma_chan *chan, void *param)
-{
-	return false;
-}
-#endif
-
 #endif /* _PXA_DMA_H_ */
-- 
2.11.0

[PATCH v3 13/14] ARM: pxa: remove the DMA IO resources

[Robert Jarzmik]

As the last driver using the former mechanism to acquire the DMA
requestor line has be converted to the dma_slave_map, remove all these
resources from the PXA devices.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
 arch/arm/mach-pxa/devices.c | 136 --------------------------------------------
 1 file changed, 136 deletions(-)

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 1e8915fc340d..5a16ea74e28a 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -60,16 +60,6 @@ static struct resource pxamci_resources[] = {
 		.end	= IRQ_MMC,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= 21,
-		.end	= 21,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 22,
-		.end	= 22,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 static u64 pxamci_dmamask = 0xffffffffUL;
@@ -407,16 +397,6 @@ static struct resource pxa_ir_resources[] = {
 		.end	= 0x40700023,
 		.flags  = IORESOURCE_MEM,
 	},
-	[5] = {
-		.start  = 17,
-		.end	= 17,
-		.flags  = IORESOURCE_DMA,
-	},
-	[6] = {
-		.start  = 18,
-		.end	= 18,
-		.flags  = IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa_device_ficp = {
@@ -545,18 +525,6 @@ static struct resource pxa25x_resource_ssp[] = {
 		.end	= IRQ_SSP,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 13,
-		.end	= 13,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 14,
-		.end	= 14,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa25x_device_ssp = {
@@ -583,18 +551,6 @@ static struct resource pxa25x_resource_nssp[] = {
 		.end	= IRQ_NSSP,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 15,
-		.end	= 15,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 16,
-		.end	= 16,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa25x_device_nssp = {
@@ -621,18 +577,6 @@ static struct resource pxa25x_resource_assp[] = {
 		.end	= IRQ_ASSP,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 23,
-		.end	= 23,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 24,
-		.end	= 24,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa25x_device_assp = {
@@ -751,18 +695,6 @@ static struct resource pxa27x_resource_ssp1[] = {
 		.end	= IRQ_SSP,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 13,
-		.end	= 13,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 14,
-		.end	= 14,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa27x_device_ssp1 = {
@@ -789,18 +721,6 @@ static struct resource pxa27x_resource_ssp2[] = {
 		.end	= IRQ_SSP2,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 15,
-		.end	= 15,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 16,
-		.end	= 16,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa27x_device_ssp2 = {
@@ -827,18 +747,6 @@ static struct resource pxa27x_resource_ssp3[] = {
 		.end	= IRQ_SSP3,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 66,
-		.end	= 66,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 67,
-		.end	= 67,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa27x_device_ssp3 = {
@@ -895,16 +803,6 @@ static struct resource pxa3xx_resources_mci2[] = {
 		.end	= IRQ_MMC2,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= 93,
-		.end	= 93,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 94,
-		.end	= 94,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa3xx_device_mci2 = {
@@ -934,16 +832,6 @@ static struct resource pxa3xx_resources_mci3[] = {
 		.end	= IRQ_MMC3,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= 100,
-		.end	= 100,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 101,
-		.end	= 101,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa3xx_device_mci3 = {
@@ -1021,18 +909,6 @@ static struct resource pxa3xx_resources_nand[] = {
 		.end	= IRQ_NAND,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for Data DMA */
-		.start	= 97,
-		.end	= 97,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for Command DMA */
-		.start	= 99,
-		.end	= 99,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
@@ -1066,18 +942,6 @@ static struct resource pxa3xx_resource_ssp4[] = {
 		.end	= IRQ_SSP4,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 2,
-		.end	= 2,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 3,
-		.end	= 3,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 /*
-- 
2.11.0

[PATCH v3 14/14] ARM: pxa: change SSP DMA channels allocation

[Robert Jarzmik]

Now the dma_slave_map is available for PXA architecture, switch the SSP
device to it.

This specifically means that :
- for platform data based machines, the DMA requestor channels are
  extracted from the slave map, where pxa-ssp-dai.<N> is a 1-1 match to
  ssp.<N>, and the channels are either "rx" or "tx".

- for device tree platforms, the dma node should be hooked into the
  pxa2xx-ac97 or pxa-ssp-dai node.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Mack <daniel@zonque.org>

---
Since v1: Removed channel names from platform_data
Since v2: Added Daniel's ack
---
 arch/arm/plat-pxa/ssp.c    | 47 ----------------------------------------------
 include/linux/pxa2xx_ssp.h |  2 --
 sound/soc/pxa/pxa-ssp.c    |  5 ++---
 3 files changed, 2 insertions(+), 52 deletions(-)

diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index ba13f793fbce..ed36dcab80f1 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -127,53 +127,6 @@ static int pxa_ssp_probe(struct platform_device *pdev)
 	if (IS_ERR(ssp->clk))
 		return PTR_ERR(ssp->clk);
 
-	if (dev->of_node) {
-		struct of_phandle_args dma_spec;
-		struct device_node *np = dev->of_node;
-		int ret;
-
-		/*
-		 * FIXME: we should allocate the DMA channel from this
-		 * context and pass the channel down to the ssp users.
-		 * For now, we lookup the rx and tx indices manually
-		 */
-
-		/* rx */
-		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
-						 0, &dma_spec);
-
-		if (ret) {
-			dev_err(dev, "Can't parse dmas property\n");
-			return -ENODEV;
-		}
-		ssp->drcmr_rx = dma_spec.args[0];
-		of_node_put(dma_spec.np);
-
-		/* tx */
-		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
-						 1, &dma_spec);
-		if (ret) {
-			dev_err(dev, "Can't parse dmas property\n");
-			return -ENODEV;
-		}
-		ssp->drcmr_tx = dma_spec.args[0];
-		of_node_put(dma_spec.np);
-	} else {
-		res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-		if (res == NULL) {
-			dev_err(dev, "no SSP RX DRCMR defined\n");
-			return -ENODEV;
-		}
-		ssp->drcmr_rx = res->start;
-
-		res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-		if (res == NULL) {
-			dev_err(dev, "no SSP TX DRCMR defined\n");
-			return -ENODEV;
-		}
-		ssp->drcmr_tx = res->start;
-	}
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		dev_err(dev, "no memory resource defined\n");
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 8461b18e4608..03a7ca46735b 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -212,8 +212,6 @@ struct ssp_device {
 	int		type;
 	int		use_count;
 	int		irq;
-	int		drcmr_rx;
-	int		drcmr_tx;
 
 	struct device_node	*of_node;
 };
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 0291c7cb64eb..e09368d89bbc 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -104,9 +104,8 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream,
 	dma = kzalloc(sizeof(struct snd_dmaengine_dai_dma_data), GFP_KERNEL);
 	if (!dma)
 		return -ENOMEM;
-
-	dma->filter_data = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
-				&ssp->drcmr_tx : &ssp->drcmr_rx;
+	dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		"tx" : "rx";
 
 	snd_soc_dai_set_dma_data(cpu_dai, substream, dma);
 
-- 
2.11.0

[PATCH v3 00/14] ARM: pxa: switch to DMA slave maps

[Boris Brezillon]

Hi Robert,

On Sun, 17 Jun 2018 19:02:03 +0200
Robert Jarzmik <robert.jarzmik@free.fr> wrote:

> As I gathered almost all the required acks, this is an information only post
> before queuing to the PXA tree.

We'll need an immutable branch/tag containing those changes, just in
case other conflicting changes get submitted to the NAND driver.

Thanks,

Boris