[PATCH 1/2] arm64: dts: sdm845: Add rpmh-rsc node

[ilina@codeaurora.org (Lina Iyer)]

On Mon, Jun 18 2018 at 14:56 -0600, Douglas Anderson wrote:
>This adds the rpmh-rsc node to sdm845 based on the examples in the
>bindings.
>
>Signed-off-by: Douglas Anderson <dianders@chromium.org>
>---
>
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
>diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>index cd308b84bed7..19b006293d3b 100644
>--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>@@ -7,6 +7,7 @@
>
> #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
>+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>
> / {
> 	interrupt-parent = <&intc>;
>@@ -984,6 +985,24 @@
> 			#mbox-cells = <1>;
> 		};
>
>+		apps_rsc: rsc at 179c0000 {
>+			label = "apps_rsc";
>+			compatible = "qcom,rpmh-rsc";
>+			reg = <0x179c0000 0x10000>,
>+			      <0x179d0000 0x10000>,
>+			      <0x179e0000 0x10000>;
>+			reg-names = "drv-0", "drv-1", "drv-2";
>+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
>+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
>+			qcom,tcs-offset = <0xd00>;
>+			qcom,drv-id = <2>;
>+			qcom,tcs-config = <SLEEP_TCS   3>,
>+					  <WAKE_TCS    3>,
>+					  <ACTIVE_TCS  2>,
>+					  <CONTROL_TCS 1>;
Sorry, my example had this incorrect order and I just noticed this. We
will need to fix the example as well.

The first TCS should be ACTIVE_TCS, then followed by SLEEP_TCS and
WAKE_TCS. This order is important and should match what is set in the
firmware.

 qcom,tcs-config = <ACTIVE_TCS  2>,
                   <SLEEP_TCS   3>,
		   <WAKE_TCS    3>,
		   <CONTROL_TCS 1>;

While the above configuration would work for now, it would fail, when we
enable system low power modes, which would use TCSes 2-7 for sleep and
wake set transitions from the firmware.

Thanks,
Lina

>+		};
>+
> 		intc: interrupt-controller at 17a00000 {
> 			compatible = "arm,gic-v3";
> 			#address-cells = <1>;
>--
>2.18.0.rc1.244.gcf134e6275-goog
>