i.MX fixes for 4.18

[shawnguo@kernel.org (Shawn Guo)]

The following changes since commit ce397d215ccd07b8ae3f71db689aedb85d56ab40:

  Linux 4.18-rc1 (2018-06-17 08:04:49 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-4.18

for you to fetch changes up to 1bcfe0564044be578841744faea1c2f46adc8178:

  ARM: dts: imx6sx: fix irq for pcie bridge (2018-06-19 14:39:36 +0800)

----------------------------------------------------------------
i.MX fixes for 4.18:
 - Fix i.MX6SX PCIe MSI interrupt number, so that MSI IRQs can be
   properly propagated to the upstream interrupt controller.
 - Fix GPCv2 MIPI/PCIe/USB_HSIC's PGC offset.  The values in Reference
   Manual are incorrect.
 - Correct SDMA setting for i.MX6Q SPI5 device to fix the issue, that
   the SPI controller RX FIFO was not empty after a DMA transfer, and
   the driver gets stuck in the next PIO transfer when reading one word
   more than expected.

----------------------------------------------------------------
Anson Huang (1):
      soc: imx: gpcv2: correct PGC offset

Oleksij Rempel (1):
      ARM: dts: imx6sx: fix irq for pcie bridge

Sean Nyekjaer (1):
      ARM: dts: imx6q: Use correct SDMA script for SPI5 core

 arch/arm/boot/dts/imx6q.dtsi  |  2 +-
 arch/arm/boot/dts/imx6sx.dtsi |  2 +-
 drivers/soc/imx/gpcv2.c       | 13 +++++++++----
 3 files changed, 11 insertions(+), 6 deletions(-)