From mboxrd@z Thu Jan 1 00:00:00 1970 From: wens@csie.org (Chen-Yu Tsai) Date: Wed, 20 Jun 2018 13:15:38 +0800 Subject: [PATCH 3/5] mfd: axp20x: Support AXP806 in I2C mode In-Reply-To: <20180620051540.25617-1-wens@csie.org> References: <20180620051540.25617-1-wens@csie.org> Message-ID: <20180620051540.25617-4-wens@csie.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The Pine64 H64 board uses an AXP806 PMIC in I2C and self-working mode. The H64 SoC does not have the usual RSB controller. This patch adds AXP806 to the list of devices supported in I2C mode. In theory, all RSB-based PMICs can also be used in I2C mode. Signed-off-by: Chen-Yu Tsai --- drivers/mfd/axp20x-i2c.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c index d35a5fe6c950..a7b7c5423ea5 100644 --- a/drivers/mfd/axp20x-i2c.c +++ b/drivers/mfd/axp20x-i2c.c @@ -65,6 +65,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = { { .compatible = "x-powers,axp202", .data = (void *)AXP202_ID }, { .compatible = "x-powers,axp209", .data = (void *)AXP209_ID }, { .compatible = "x-powers,axp221", .data = (void *)AXP221_ID }, + { .compatible = "x-powers,axp806", .data = (void *)AXP806_ID }, { }, }; MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match); @@ -74,6 +75,7 @@ static const struct i2c_device_id axp20x_i2c_id[] = { { "axp202", 0 }, { "axp209", 0 }, { "axp221", 0 }, + { "axp806", 0 }, { }, }; MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); -- 2.17.1