From mboxrd@z Thu Jan 1 00:00:00 1970 From: robh@kernel.org (Rob Herring) Date: Wed, 20 Jun 2018 12:25:12 -0600 Subject: [PATCH v3 4/9] dt-bindings: display: add DT bindings for BOE HV070WSA-100 panel In-Reply-To: <1529396370-18761-5-git-send-email-m.purski@samsung.com> References: <1529396370-18761-1-git-send-email-m.purski@samsung.com> <1529396370-18761-5-git-send-email-m.purski@samsung.com> Message-ID: <20180620182512.GA14562@rob-hp-laptop> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Jun 19, 2018 at 10:19:25AM +0200, Maciej Purski wrote: > From: Andrzej Hajda > > The patch adds bindings to BOE HV070-WSA WSVGA panel. > Bindings are compatible with simple panel bindings. > > Signed-off-by: Andrzej Hajda > Signed-off-by: Maciej Purski > --- > .../bindings/display/panel/boe,hv070wsa-100.txt | 28 ++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt > new file mode 100644 > index 0000000..9e8eea8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt > @@ -0,0 +1,28 @@ > +BOE HV070WSA-100 7.01" WSVGA TFT LCD panel > + > +Required properties: > +- compatible: should be "boe,hv070wsa-100" > +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) > +- enable-gpio: GPIO pin to enable and disable panel (active high) enable-gpios With that, Reviewed-by: Rob Herring