From: david@lechnology.com (David Lechner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/8] ARM: OMAP2+: add pdata quirks for PRUSS reset
Date: Sat, 23 Jun 2018 16:08:05 -0500 [thread overview]
Message-ID: <20180623210810.21232-4-david@lechnology.com> (raw)
In-Reply-To: <20180623210810.21232-1-david@lechnology.com>
This adds platform data for the PRUSS reset on OMAP2+. This is following
the pattern used by several other platform devices on these SoCs since
there is not a proper reset controller.
Signed-off-by: David Lechner <david@lechnology.com>
---
arch/arm/mach-omap2/pdata-quirks.c | 9 +++++++++
include/linux/platform_data/ti-pruss.h | 18 ++++++++++++++++++
2 files changed, 27 insertions(+)
create mode 100644 include/linux/platform_data/ti-pruss.h
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 7f02743edbe4..8ea35d6cded5 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -25,6 +25,7 @@
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/platform_data/iommu-omap.h>
#include <linux/platform_data/ti-sysc.h>
+#include <linux/platform_data/ti-pruss.h>
#include <linux/platform_data/wkup_m3.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
@@ -424,6 +425,12 @@ static struct wkup_m3_platform_data wkup_m3_data = {
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
+
+static struct ti_pruss_platform_data pruss_data = {
+ .reset_name = "pruss",
+ .assert_reset = omap_device_assert_hardreset,
+ .deassert_reset = omap_device_deassert_hardreset,
+};
#endif
#ifdef CONFIG_SOC_OMAP5
@@ -568,6 +575,8 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
#ifdef CONFIG_SOC_AM33XX
OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
&wkup_m3_data),
+ OF_DEV_AUXDATA("ti,am3352-pru-rproc", 0x4a300000, "4a300000.cpu",
+ &pruss_data),
#endif
#ifdef CONFIG_SOC_AM43XX
OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
diff --git a/include/linux/platform_data/ti-pruss.h b/include/linux/platform_data/ti-pruss.h
new file mode 100644
index 000000000000..e401e621ebdf
--- /dev/null
+++ b/include/linux/platform_data/ti-pruss.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * TI PRU remote processor platform data
+ */
+
+#ifndef _LINUX_PLATFORM_DATA_TI_PRU_H
+#define _LINUX_PLATFORM_DATA_TI_PRU_H
+
+struct platform_device;
+
+struct ti_pruss_platform_data {
+ const char *reset_name;
+
+ int (*assert_reset)(struct platform_device *pdev, const char *name);
+ int (*deassert_reset)(struct platform_device *pdev, const char *name);
+};
+
+#endif /* _LINUX_PLATFORM_DATA_TI_PRU_H */
--
2.17.1
next prev parent reply other threads:[~2018-06-23 21:08 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-23 21:08 No subject David Lechner
2018-06-23 21:08 ` [PATCH 1/8] remoteproc: add map parameter to da_to_va David Lechner
2018-06-23 21:08 ` [PATCH 2/8] remoteproc: add page lookup for TI PRU to ELF loader David Lechner
2018-06-23 21:08 ` David Lechner [this message]
2018-06-23 21:08 ` [PATCH 4/8] dt-bindings: add bindings for TI PRU as remoteproc David Lechner
2018-07-03 20:59 ` Rob Herring
2018-06-23 21:08 ` [PATCH 5/8] remoteproc: new driver for TI PRU David Lechner
2018-06-29 10:14 ` Roger Quadros
[not found] ` <CA+CtpRhQ07=3UytY7QrfnpWkY06UqHbNVq099Coez3C4H3U5yg@mail.gmail.com>
2018-07-02 8:05 ` Roger Quadros
2018-06-23 21:08 ` [PATCH 6/8] ARM: davinci_all_defconfig: enable PRU remoteproc module David Lechner
2018-06-23 21:08 ` [PATCH 7/8] ARM: dts: da850: add node for PRUSS David Lechner
2018-06-23 21:08 ` [PATCH 8/8] ARM: dts: am33xx: add node for PRU remoteproc David Lechner
[not found] ` <e0a883af-8228-5b06-3186-f57d8f898aaa@ti.com>
2018-06-29 17:44 ` New remoteproc driver for TI PRU David Lechner
2018-06-30 0:17 ` Suman Anna
2018-08-06 16:32 ` David Lechner
2018-08-07 1:39 ` Suman Anna
2018-07-02 8:17 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180623210810.21232-4-david@lechnology.com \
--to=david@lechnology.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).