From mboxrd@z Thu Jan 1 00:00:00 1970 From: andrea.merello@gmail.com (Andrea Merello) Date: Mon, 25 Jun 2018 11:27:24 +0200 Subject: [PATCH v3 5/5] dt-bindings: dmaengine: xilinx_dma: drop has-sg property In-Reply-To: <20180625092724.22164-1-andrea.merello@gmail.com> References: <20180625092724.22164-1-andrea.merello@gmail.com> Message-ID: <20180625092724.22164-5-andrea.merello@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This property is not needed anymore, because the driver now autodetects it. Delete references in documentation. Cc: Rob Herring Cc: Mark Rutland Cc: devicetree at vger.kernel.org Cc: Radhey Shyam Pandey Signed-off-by: Andrea Merello Reviewed-by: Radhey Shyam Pandey --- Changes in v2: - cc DT maintainer Changes in v3: - cc DT maintainerS/ML --- Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 3 --- 1 file changed, 3 deletions(-) diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt index c894abe28baa..09a41843cbc0 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt @@ -37,9 +37,6 @@ Required properties: Required properties for VDMA: - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. -Optional properties: -- xlnx,include-sg: Tells configured for Scatter-mode in - the hardware. Optional properties for AXI DMA: - xlnx,sg-length-width: Should be the width of the length register as configured in h/w. - xlnx,mcdma: Tells whether configured for multi-channel mode in the hardware. -- 2.17.1