From: brgl@bgdev.pl (Bartosz Golaszewski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 11/13] ARM: davinci: dm646x-evm: use aemif platform driver
Date: Tue, 26 Jun 2018 11:25:35 +0200 [thread overview]
Message-ID: <20180626092537.6737-12-brgl@bgdev.pl> (raw)
In-Reply-To: <20180626092537.6737-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in dm646x-evm.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/mach-davinci/board-dm646x-evm.c | 52 +++++++++++++++++++-----
1 file changed, 41 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 867ab2fa6cfd..3e5ee09ee717 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -24,6 +24,7 @@
#include <linux/i2c.h>
#include <linux/platform_data/at24.h>
#include <linux/platform_data/pcf857x.h>
+#include <linux/platform_data/ti-aemif.h>
#include <media/i2c/tvp514x.h>
#include <media/i2c/adv7343.h>
@@ -106,16 +107,47 @@ static struct resource davinci_nand_resources[] = {
},
};
-static struct platform_device davinci_nand_device = {
- .name = "davinci_nand",
- .id = 0,
+static struct platform_device davinci_aemif_devices[] = {
+ {
+ .name = "davinci_nand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(davinci_nand_resources),
+ .resource = davinci_nand_resources,
+ .dev = {
+ .platform_data = &davinci_nand_data,
+ },
+ },
+};
+
+static struct resource davinci_aemif_resources[] = {
+ {
+ .start = DM646X_ASYNC_EMIF_CONTROL_BASE,
+ .end = DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
- .num_resources = ARRAY_SIZE(davinci_nand_resources),
- .resource = davinci_nand_resources,
+static struct aemif_abus_data davinci_aemif_abus_data[] = {
+ {
+ .cs = 1,
+ },
+};
- .dev = {
- .platform_data = &davinci_nand_data,
+static struct aemif_platform_data davinci_aemif_pdata = {
+ .abus_data = davinci_aemif_abus_data,
+ .num_abus_data = ARRAY_SIZE(davinci_aemif_abus_data),
+ .sub_devices = davinci_aemif_devices,
+ .num_sub_devices = ARRAY_SIZE(davinci_aemif_devices),
+};
+
+static struct platform_device davinci_aemif_device = {
+ .name = "ti-aemif",
+ .id = -1,
+ .dev = {
+ .platform_data = &davinci_aemif_pdata,
},
+ .resource = davinci_aemif_resources,
+ .num_resources = ARRAY_SIZE(davinci_aemif_resources),
};
#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
@@ -793,10 +825,8 @@ static __init void evm_init(void)
if (machine_is_davinci_dm6467tevm())
davinci_nand_data.timing = &dm6467tevm_nandflash_timing;
- platform_device_register(&davinci_nand_device);
-
- if (davinci_aemif_setup(&davinci_nand_device))
- pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+ if (platform_device_register(&davinci_aemif_device))
+ pr_warn("%s: Cannot register AEMIF device.\n", __func__);
dm646x_init_edma(dm646x_edma_rsv);
--
2.17.1
next prev parent reply other threads:[~2018-06-26 9:25 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-26 9:25 [PATCH v2 00/13] ARM: davinci: remove duplicate aemif support Bartosz Golaszewski
2018-06-26 9:25 ` [PATCH v2 01/13] clk: davinci: psc-da850: remove the 'davinci_nand.0" lookup Bartosz Golaszewski
2018-06-26 16:15 ` David Lechner
2018-06-26 9:25 ` [PATCH v2 02/13] clk: davinci: psc-dm365: use two lookup entries for the aemif clock Bartosz Golaszewski
2018-06-26 16:16 ` David Lechner
2018-06-26 9:25 ` [PATCH v2 03/13] clk: davinci: psc-dm644x: " Bartosz Golaszewski
2018-06-26 16:17 ` David Lechner
2018-06-26 9:25 ` [PATCH v2 04/13] clk: davinci: psc-dm646x: " Bartosz Golaszewski
2018-06-26 16:17 ` David Lechner
2018-06-27 10:01 ` Sekhar Nori
2018-06-27 10:03 ` Bartosz Golaszewski
2018-06-27 10:26 ` Sekhar Nori
2018-06-27 16:54 ` David Lechner
2018-06-26 9:25 ` [PATCH v2 05/13] clk: davinci: psc-da830: add a lookup entry for " Bartosz Golaszewski
2018-06-26 16:18 ` David Lechner
2018-06-26 9:25 ` [PATCH v2 06/13] ARM: davinci: omapl138-hawk: add aemif & nand support Bartosz Golaszewski
2018-06-27 10:11 ` Sekhar Nori
2018-06-26 9:25 ` [PATCH v2 07/13] ARM: davinci: da850-evm: use aemif platform driver in legacy mode Bartosz Golaszewski
2018-06-26 9:25 ` [PATCH v2 08/13] ARM: davinci: dm365-evm: use the ti-aemif soc driver Bartosz Golaszewski
2018-06-26 9:25 ` [PATCH v2 09/13] ARM: davinci: dm644x-evm: use aemif platform driver Bartosz Golaszewski
2018-06-26 9:25 ` [PATCH v2 10/13] ARM: davinci: da830-evm: " Bartosz Golaszewski
2018-06-26 9:25 ` Bartosz Golaszewski [this message]
2018-06-26 9:25 ` [PATCH v2 12/13] ARM: davinci: mityomapl138: " Bartosz Golaszewski
2018-06-26 9:25 ` [PATCH v2 13/13] ARM: davinci: unduplicate aemif support Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180626092537.6737-12-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).