linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: lorenzo.pieralisi@arm.com (Lorenzo Pieralisi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 5/6] PCI: aardvark: Introduce an advk_pcie_valid_device() helper
Date: Wed, 27 Jun 2018 17:51:24 +0100	[thread overview]
Message-ID: <20180627165124.GA8243@red-moon> (raw)
In-Reply-To: <20180406145536.19637-6-thomas.petazzoni@bootlin.com>

On Fri, Apr 06, 2018 at 04:55:35PM +0200, Thomas Petazzoni wrote:
> In other to mimic other PCIe host controller drivers, introduce an
> advk_pcie_valid_device() helper, used in the configuration read/write
> functions.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> ---
> Changes since v4:
>  - Move later into the series, so that it doesn't need to be pushed as
>    a fix for stable.
> Changes since v3:
>  - Make the new helper return a bool instead of int
> Changes since v2:
>  - New patch
> ---
>  drivers/pci/host/pci-aardvark.c | 13 +++++++++++--
>  1 file changed, 11 insertions(+), 2 deletions(-)

Hi Thomas,

please rebase patch 5 (this patch) and 6 and resend, I will apply them
straight away, sorry for the delay.

Thanks,
Lorenzo

> diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
> index 9abf549631b4..69c4fd50947e 100644
> --- a/drivers/pci/host/pci-aardvark.c
> +++ b/drivers/pci/host/pci-aardvark.c
> @@ -431,6 +431,15 @@ static int advk_pcie_wait_pio(struct advk_pcie *pcie)
>  	return -ETIMEDOUT;
>  }
>  
> +static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
> +				  int devfn)
> +{
> +	if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
> +		return false;
> +
> +	return true;
> +}
> +
>  static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
>  			     int where, int size, u32 *val)
>  {
> @@ -438,7 +447,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
>  	u32 reg;
>  	int ret;
>  
> -	if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0) {
> +	if (!advk_pcie_valid_device(pcie, bus, devfn)) {
>  		*val = 0xffffffff;
>  		return PCIBIOS_DEVICE_NOT_FOUND;
>  	}
> @@ -492,7 +501,7 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
>  	int offset;
>  	int ret;
>  
> -	if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
> +	if (!advk_pcie_valid_device(pcie, bus, devfn))
>  		return PCIBIOS_DEVICE_NOT_FOUND;
>  
>  	if (where % size)
> -- 
> 2.14.3
> 

  reply	other threads:[~2018-06-27 16:51 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-06 14:55 [PATCH v4 0/6] PCI: aardvark: misc fixes and improvements Thomas Petazzoni
2018-04-06 14:55 ` [PATCH v4 1/6] PCI: aardvark: Fix logic in advk_pcie_{rd,wr}_conf() Thomas Petazzoni
2018-04-06 14:55 ` [PATCH v4 2/6] PCI: aardvark: Set PIO_ADDR_LS correctly in advk_pcie_rd_conf() Thomas Petazzoni
2018-04-06 14:55 ` [PATCH v4 3/6] PCI: aardvark: Use ISR1 instead of ISR0 interrupt in legacy irq mode Thomas Petazzoni
2018-04-06 14:55 ` [PATCH v4 4/6] PCI: aardvark: Fix PCIe Max Read Request Size setting Thomas Petazzoni
2018-04-06 14:55 ` [PATCH v4 5/6] PCI: aardvark: Introduce an advk_pcie_valid_device() helper Thomas Petazzoni
2018-06-27 16:51   ` Lorenzo Pieralisi [this message]
2018-06-27 17:18     ` Lorenzo Pieralisi
2018-06-27 18:52       ` Thomas Petazzoni
2018-04-06 14:55 ` [PATCH v4 6/6] PCI: aardvark: Remove PCIe outbound window configuration Thomas Petazzoni
2018-04-09 16:23 ` [PATCH v4 0/6] PCI: aardvark: misc fixes and improvements Lorenzo Pieralisi
2018-04-09 18:54   ` Thomas Petazzoni
2018-04-18 13:02     ` Lorenzo Pieralisi
2018-04-18 13:49       ` Thomas Petazzoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180627165124.GA8243@red-moon \
    --to=lorenzo.pieralisi@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).