linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: will.deacon@arm.com (Will Deacon)
To: linux-arm-kernel@lists.infradead.org
Subject: Clarifying dma_wmb behavior in presence of non-coherent masters and outer caches
Date: Mon, 2 Jul 2018 18:45:53 +0100	[thread overview]
Message-ID: <20180702174552.GD23687@arm.com> (raw)
In-Reply-To: <1530539366.22468.89.camel@pengutronix.de>

On Mon, Jul 02, 2018 at 03:49:26PM +0200, Lucas Stach wrote:
> Am Freitag, den 29.06.2018, 18:43 +0100 schrieb Will Deacon:
> > On Fri, Jun 29, 2018 at 05:48:01PM +0100, Russell King - ARM Linux wrote:
> > > On Fri, Jun 29, 2018 at 05:22:48PM +0100, Will Deacon wrote:
> > > > On Fri, Jun 29, 2018 at 03:25:39PM +0100, Russell King - ARM Linux wrote:
> > > > > Maybe Will can shed some light on this topic.
> > > > 
> > > > You're right that cacheability and shareability are different things. For
> > > > the purposes of ordering and coherence, we care about shareability. Normal
> > > > non-cacheable is outer-shareable (which is a superset of inner-shareable),
> > > 
> > > What does it mean when the "implementation" doesn't define two shareable
> > > domains - does it mean that inner and outer shareable are combined into
> > > just one "shareable" domain, or is outer shareable always treated as
> > > "everything but inner shareable"?
> > 
> > If there is only one shareability domain, then the inner and outer shareable
> > domains refer to that domain (i.e. they're the same).
> > 
> > > From the paragraph I quoted from the ARM ARM, it seems that the former
> > > applies, which should also mean that "dmb ish*" and "dmb osh*" are
> > > functionally equivalent, and only touch the inner shareable domain.
> > 
> > In this case, yes. In practice, there is usually one inner-shareable domain
> > which contains the CPUs and coherent DMA devices, and there is one
> > outer-shareable domain containing that inner-shareable domain, where
> > non-coherent DMA lives only in the outer-shareable domain. I don't know
> > of any systems where that isn't the case, and I'm not sure that our
> > interconnects even permit building anything else (I'd need to check).
> > 
> Sorry for not citing from the ARM ARM, but [1] seems to partly
> contradict what you said above. Especially the table detailing the
> shareability domains and the related picture seem to clash with the
> above statement that most systems just have an outer-shareable domain
> covering the whole system.

I don't think the picture in that article is representative of a real SoC
design, but I'm pretty much just relaying the feedback from the architecture
team here.

> Also the section "External caches", "Before AMBA4 ACE" seems to suggest
> that the barriers aren't fully propagated to the PL310 write-caches and
> master ports. I'm unsure if this is just an artifact of the mentioned
> MMIO access, so handling of normal vs. device memory transactions in
> the PL310.

I'll check with the hardware folks about the PL310, but I don't see how
you could propagate barriers over AXI3 anyway because I don't think this
stuff existed back then.

Will

  reply	other threads:[~2018-07-02 17:45 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-29 12:28 Clarifying dma_wmb behavior in presence of non-coherent masters and outer caches Lucas Stach
2018-06-29 14:25 ` Russell King - ARM Linux
2018-06-29 16:19   ` Lucas Stach
2018-06-29 16:22   ` Will Deacon
2018-06-29 16:48     ` Russell King - ARM Linux
2018-06-29 17:43       ` Will Deacon
2018-06-29 18:01         ` Russell King - ARM Linux
2018-07-02 13:49         ` Lucas Stach
2018-07-02 17:45           ` Will Deacon [this message]
2018-07-06 12:26             ` Will Deacon
2018-07-09  6:20               ` Oleksij Rempel
2018-09-13 13:17                 ` Will Deacon
2018-09-13 14:09                   ` Oleksij Rempel
2018-07-09  9:45               ` Lucas Stach
2018-06-29 17:14     ` Lucas Stach
2018-06-29 17:46       ` Will Deacon
2018-07-02  9:58         ` Lucas Stach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180702174552.GD23687@arm.com \
    --to=will.deacon@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).