From mboxrd@z Thu Jan  1 00:00:00 1970
From: boris.brezillon@bootlin.com (Boris Brezillon)
Date: Tue, 3 Jul 2018 09:17:11 +0200
Subject: [PATCH 0/3] clk: meson: add a sub EMMC clock controller support
In-Reply-To: <20180703145716.31860-1-yixun.lan@amlogic.com>
References: <20180703145716.31860-1-yixun.lan@amlogic.com>
Message-ID: <20180703091711.1d52c278@bbrezillon>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Tue, 3 Jul 2018 14:57:13 +0000
Yixun Lan <yixun.lan@amlogic.com> wrote:

> This driver will add a EMMC clock controller driver support.
> The original idea about adding a clock controller is during the
> discussion in the NAND driver mainline effort[1].
> 
> I've tested this in the S400 board (AXG platform) by using NAND driver.
> 
> [1] https://lkml.kernel.org/r/20180628090034.0637a062 at xps13

This is much better :-).

> 
> Yixun Lan (3):
>   clk: meson: add DT documentation for emmc clock controller
>   clk: meson: add sub EMMC clock dt-bindings IDs
>   clk: meson: add sub EMMC clock controller driver
> 
>  .../bindings/clock/amlogic,emmc-clkc.txt      |  45 ++++++
>  drivers/clk/meson/Kconfig                     |   9 ++
>  drivers/clk/meson/Makefile                    |   1 +
>  drivers/clk/meson/emmc-clkc.c                 | 136 ++++++++++++++++++
>  include/dt-bindings/clock/emmc-clkc.h         |  14 ++
>  5 files changed, 205 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,emmc-clkc.txt
>  create mode 100644 drivers/clk/meson/emmc-clkc.c
>  create mode 100644 include/dt-bindings/clock/emmc-clkc.h
>