From mboxrd@z Thu Jan 1 00:00:00 1970 From: codekipper@gmail.com (codekipper at gmail.com) Date: Wed, 4 Jul 2018 10:30:03 +0200 Subject: [linux-sunxi][PATCH v2] ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2 Message-ID: <20180704083003.26849-1-codekipper@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Marcus Cooper The enabling of the EMAC was reverted as there was an issue on how to handle the integrated PHY and it was getting close to the release window (fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes")). When a solution was found, then the changes were restored in 4b236a0fe512 ("arm: dts: sunxi: h3/h5: Restore EMAC changes") and 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)"). Unfortunately enabling for the Beelink X2 was missed. This reverts partially commit 6b0e06df5cad (Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2") Signed-off-by: Marcus Cooper --- Changes for v2: - Added more details in commit message about the reverting and restoring patches. --- arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index cf1f970b0c6f..5d23667dc2d2 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -123,6 +123,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &hdmi { status = "okay"; }; -- 2.18.0