From mboxrd@z Thu Jan 1 00:00:00 1970 From: miquel.raynal@bootlin.com (Miquel Raynal) Date: Thu, 5 Jul 2018 18:04:32 +0200 Subject: [PATCH v3 18/23] dt-bindings: cp110: add the thermal node in the syscon file In-Reply-To: <20180705160437.12325-1-miquel.raynal@bootlin.com> References: <20180705160437.12325-1-miquel.raynal@bootlin.com> Message-ID: <20180705160437.12325-19-miquel.raynal@bootlin.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Explain the thermal bindings now that the thermal IP is described being inside of a system controller. Add a reference to the thermal-zone node. Signed-off-by: Miquel Raynal Reviewed-by: Rob Herring --- .../arm/marvell/cp110-system-controller.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt index 54b0d64ce819..81ce742d2760 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt @@ -11,6 +11,9 @@ For the top level node: - compatible: must be: "syscon", "simple-mfd"; - reg: register area of the CP110 system controller +SYSTEM CONTROLLER 0 +=================== + Clocks: ------- @@ -186,3 +189,37 @@ CP110_LABEL(syscon0): system-controller at 440000 { }; }; + +SYSTEM CONTROLLER 1 +=================== + +Thermal: +-------- + +The thermal IP can probe the temperature all around the processor. It +may feature several channels, each of them wired to one sensor. + +For common binding part and usage, refer to +Documentation/devicetree/bindings/thermal/thermal.txt + +Required properties: +- compatible: must be one of: + * marvell,armada-cp110-thermal +- reg: register range associated with the thermal functions. + +Optional properties: +- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer + to this IP and represents the channel ID. There is one sensor per + channel. O refers to the thermal IP internal channel. + +Example: +CP110_LABEL(syscon1): system-controller at 6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + + CP110_LABEL(thermal): thermal-sensor at 70 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x70 0x10>; + #thermal-sensor-cells = <1>; + }; +}; -- 2.14.1