[PATCH v5 10/22] ARM: dts: sun7i-a20: Use most-qualified system control compatibles

[paul.kocialkowski@bootlin.com (Paul Kocialkowski)]

This switches the sun7i-a20 dtsi to use the most qualified compatibles
for the system-control block (previously named SRAM controller) as well
as the SRAM blocks. The sun4i-a10 compatibles are kept since these
hardware blocks are backward-compatible.

The phandle for system control is also updated to reflect the fact that
the controller described is really about system control rather than SRAM
control.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e529e4ff2174..59abb623b249 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -239,8 +239,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		sram-controller at 1c00000 {
-			compatible = "allwinner,sun4i-a10-sram-controller";
+		system-control at 1c00000 {
+			compatible = "allwinner,sun7i-a20-system-control",
+				     "allwinner,sun4i-a10-system-control";
 			reg = <0x01c00000 0x30>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -254,7 +255,8 @@
 				ranges = <0 0x00000000 0xc000>;
 
 				emac_sram: sram-section at 8000 {
-					compatible = "allwinner,sun4i-a10-sram-a3-a4";
+					compatible = "allwinner,sun7i-a20-sram-a3-a4",
+						     "allwinner,sun4i-a10-sram-a3-a4";
 					reg = <0x8000 0x4000>;
 					status = "disabled";
 				};
@@ -268,7 +270,8 @@
 				ranges = <0 0x00010000 0x1000>;
 
 				otg_sram: sram-section at 0 {
-					compatible = "allwinner,sun4i-a10-sram-d";
+					compatible = "allwinner,sun7i-a20-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
 					reg = <0x0000 0x1000>;
 					status = "disabled";
 				};
-- 
2.17.1