From: paul.kocialkowski@bootlin.com (Paul Kocialkowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 17/22] dt-bindings: media: Document bindings for the Sunxi-Cedrus VPU driver
Date: Tue, 10 Jul 2018 10:01:09 +0200 [thread overview]
Message-ID: <20180710080114.31469-18-paul.kocialkowski@bootlin.com> (raw)
In-Reply-To: <20180710080114.31469-1-paul.kocialkowski@bootlin.com>
This adds a device-tree binding document that specifies the properties
used by the Sunxi-Cedurs VPU driver, as well as examples.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/media/sunxi-cedrus.txt | 54 +++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/sunxi-cedrus.txt
diff --git a/Documentation/devicetree/bindings/media/sunxi-cedrus.txt b/Documentation/devicetree/bindings/media/sunxi-cedrus.txt
new file mode 100644
index 000000000000..a089a0c1ff05
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/sunxi-cedrus.txt
@@ -0,0 +1,54 @@
+Device-tree bindings for the VPU found in Allwinner SoCs, referred to as the
+Video Engine (VE) in Allwinner literature.
+
+The VPU can only access the first 256 MiB of DRAM, that are DMA-mapped starting
+from the DRAM base. This requires specific memory allocation and handling.
+
+Required properties:
+- compatible : must be one of the following compatibles:
+ - "allwinner,sun4i-a10-video-engine"
+ - "allwinner,sun5i-a13-video-engine"
+ - "allwinner,sun7i-a20-video-engine"
+ - "allwinner,sun8i-a33-video-engine"
+ - "allwinner,sun8i-h3-video-engine"
+- reg : register base and length of VE;
+- clocks : list of clock specifiers, corresponding to entries in
+ the clock-names property;
+- clock-names : should contain "ahb", "mod" and "ram" entries;
+- resets : phandle for reset;
+- interrupts : VE interrupt number;
+- allwinner,sram : SRAM region to use with the VE.
+
+Optional properties:
+- memory-region : CMA pool to use for buffers allocation instead of the
+ default CMA pool.
+
+Example:
+
+reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+ cma_pool: cma at 4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+};
+
+video-codec at 1c0e000 {
+ compatible = "allwinner,sun7i-a20-video-engine";
+ reg = <0x01c0e000 0x1000>;
+
+ clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+
+ resets = <&ccu RST_VE>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+};
--
2.17.1
next prev parent reply other threads:[~2018-07-10 8:01 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-10 8:00 [PATCH v5 00/22] Sunxi-Cedrus driver for the Allwinner Video Engine, using media requests Paul Kocialkowski
2018-07-10 8:00 ` [PATCH v5 01/22] v4l2-ctrls: add v4l2_ctrl_request_hdl_find/put/ctrl_find functions Paul Kocialkowski
2018-07-10 8:00 ` [PATCH v5 02/22] fixup! " Paul Kocialkowski
2018-07-10 8:07 ` Geert Uytterhoeven
2018-07-10 8:13 ` Paul Kocialkowski
2018-07-10 8:17 ` Hans Verkuil
2018-07-10 8:21 ` Paul Kocialkowski
2018-07-10 8:00 ` [PATCH v5 03/22] dt-bindings: sram: sunxi: Introduce new A10 binding for system-control Paul Kocialkowski
2018-07-10 14:02 ` Chen-Yu Tsai
2018-07-11 8:34 ` Maxime Ripard
2018-07-10 8:00 ` [PATCH v5 04/22] dt-bindings: sram: sunxi: Add A13, A20, A23 and H3 dedicated bindings Paul Kocialkowski
2018-07-10 14:36 ` Chen-Yu Tsai
2018-07-11 8:46 ` Maxime Ripard
2018-07-10 8:00 ` [PATCH v5 05/22] dt-bindings: sram: sunxi: Populate valid sections compatibles Paul Kocialkowski
2018-07-10 14:47 ` Chen-Yu Tsai
2018-07-11 8:55 ` Maxime Ripard
2018-07-10 8:00 ` [PATCH v5 06/22] soc: sunxi: sram: Add dt match for the A10 system-control compatible Paul Kocialkowski
2018-07-10 14:48 ` Chen-Yu Tsai
2018-07-11 8:35 ` Maxime Ripard
2018-07-10 8:00 ` [PATCH v5 07/22] drivers: soc: sunxi: Add support for the C1 SRAM region Paul Kocialkowski
2018-07-10 14:49 ` Chen-Yu Tsai
2018-07-10 8:01 ` [PATCH v5 08/22] ARM: dts: sun4i-a10: Use system-control compatible Paul Kocialkowski
2018-07-10 14:52 ` Chen-Yu Tsai
2018-07-10 14:58 ` Maxime Ripard
2018-07-10 8:01 ` [PATCH v5 09/22] ARM: dts: sun5i: Use most-qualified system control compatibles Paul Kocialkowski
2018-07-10 14:53 ` [linux-sunxi] " Chen-Yu Tsai
2018-07-11 9:01 ` Maxime Ripard
2018-07-10 8:01 ` [PATCH v5 10/22] ARM: dts: sun7i-a20: " Paul Kocialkowski
2018-07-10 14:54 ` [linux-sunxi] " Chen-Yu Tsai
2018-07-10 8:01 ` [PATCH v5 11/22] ARM: sun5i: Add support for the C1 SRAM region with the SRAM controller Paul Kocialkowski
2018-07-10 14:56 ` Chen-Yu Tsai
2018-07-11 9:08 ` Maxime Ripard
2018-07-10 8:01 ` [PATCH v5 12/22] ARM: sun7i-a20: " Paul Kocialkowski
2018-07-11 9:11 ` Maxime Ripard
2018-07-10 8:01 ` [PATCH v5 13/22] ARM: sun8i-a23-a33: Add SRAM controller node and C1 SRAM region Paul Kocialkowski
2018-07-11 9:14 ` Maxime Ripard
2018-07-10 8:01 ` [PATCH v5 14/22] ARM: sun8i-h3: " Paul Kocialkowski
2018-07-11 9:15 ` Maxime Ripard
2018-07-10 8:01 ` [PATCH v5 15/22] media: v4l: Add definitions for MPEG2 slice format and header metadata Paul Kocialkowski
2018-07-10 8:01 ` [PATCH v5 16/22] media: v4l: Add definition for Allwinner's MB32-tiled NV12 format Paul Kocialkowski
2018-07-10 8:01 ` Paul Kocialkowski [this message]
2018-07-10 8:01 ` [PATCH v5 18/22] media: platform: Add Sunxi-Cedrus VPU decoder driver Paul Kocialkowski
2018-07-10 8:42 ` Maxime Ripard
2018-07-24 14:56 ` Paul Kocialkowski
2018-07-10 19:57 ` Ezequiel Garcia
2018-07-13 8:40 ` Paul Kocialkowski
2018-07-10 8:01 ` [PATCH v5 19/22] ARM: dts: sun5i: Add Video Engine and reserved memory nodes Paul Kocialkowski
2018-07-10 8:01 ` [PATCH v5 20/22] ARM: dts: sun7i-a20: " Paul Kocialkowski
2018-07-10 9:23 ` Maxime Ripard
2018-07-13 8:28 ` Paul Kocialkowski
2018-07-10 8:01 ` [PATCH v5 21/22] ARM: dts: sun8i-a33: " Paul Kocialkowski
2018-07-10 8:01 ` [PATCH v5 22/22] ARM: dts: sun8i-h3: " Paul Kocialkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180710080114.31469-18-paul.kocialkowski@bootlin.com \
--to=paul.kocialkowski@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).