* [PATCH v4 1/5] ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones
2018-07-07 10:09 [PATCH v4 0/5] Initial support for Samsung Galaxy S and Galaxy S 4G Paweł Chmiel
@ 2018-07-07 10:09 ` Paweł Chmiel
2018-07-07 10:29 ` Krzysztof Kozlowski
2018-07-07 10:09 ` [PATCH v4 2/5] ARM: dts: s5pv210: Add initial DTS for Samsung Galaxy S phone Paweł Chmiel
` (4 subsequent siblings)
5 siblings, 1 reply; 14+ messages in thread
From: Paweł Chmiel @ 2018-07-07 10:09 UTC (permalink / raw)
To: linux-arm-kernel
This DTS file have initial support Samsung Aries based phones.
Initial version have support for:
- sdcard
- internal memory (present only on non 4g variant)
- max8998 pmic and rtc
- max17040 fuel gauge
- gpio keys
- fimd (no panel driver yet)
- usb (peripherial mode)
- wifi
Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
Changes from v3:
- Fix dts warnings
Changes from v2:
- Restored pinctrl nodes order
- Correct order of nodes
Changes from v1:
- Removed duplicated and unneeded headers
- Corrected node names
- Added missing spaces
- Removed unneeded pinctrl and sorted entries
- Set correct interrupt type for max8998 pmic
- Add missing regulators
---
---
arch/arm/boot/dts/s5pv210-aries.dtsi | 419 +++++++++++++++++++++++++++++++++++
1 file changed, 419 insertions(+)
create mode 100644 arch/arm/boot/dts/s5pv210-aries.dtsi
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
new file mode 100644
index 000000000000..575094ea7024
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S5PV210 based Galaxy Aries board device tree source
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "s5pv210.dtsi"
+
+/ {
+ compatible = "samsung,aries", "samsung,s5pv210";
+
+ aliases {
+ i2c6 = &i2c_pmic;
+ i2c9 = &i2c_fuel;
+ };
+
+ memory at 30000000 {
+ device_type = "memory";
+ reg = <0x30000000 0x05000000
+ 0x40000000 0x10000000
+ 0x50000000 0x08000000>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_gpio_rst>;
+ post-power-on-delay-ms = <500>;
+ power-off-delay-us = <500>;
+ };
+
+ i2c_pmic: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic at 66 {
+ compatible = "maxim,max8998";
+ reg = <0x66>;
+ interrupt-parent = <&gph0>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+ max8998,pmic-buck1-default-dvs-idx = <1>;
+ max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
+ <&gph0 4 GPIO_ACTIVE_HIGH>;
+ max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>,
+ <1050000>, <950000>;
+
+ max8998,pmic-buck2-default-dvs-idx = <0>;
+ max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
+ max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;
+
+ regulators {
+ ldo2_reg: LDO2 {
+ regulator-name = "VALIVE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VUSB_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VADC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "LDO6";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VLCD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* Till we get panel driver */
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VUSB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VCC_2.8V_PDA";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VPLL_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "CAM_AF_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "CAM_SENSOR_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VGA_VDDIO_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VGA_DVDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "CAM_ISP_HOST_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VGA_AVDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VCC_3.0V_LCD";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ /* Till we get panel driver */
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vddarm";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1250000>;
+ };
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vddint";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1100000>;
+ };
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VCC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ap32khz_reg: EN32KHz-AP {
+ regulator-name = "32KHz AP";
+ regulator-always-on;
+ };
+
+ cp32khz_reg: EN32KHz-CP {
+ regulator-name = "32KHz CP";
+ };
+
+ vichg_reg: ENVICHG {
+ regulator-name = "VICHG";
+ regulator-always-on;
+ };
+
+ safe1_sreg: ESAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ };
+
+ safe2_sreg: ESAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ };
+ };
+ };
+ };
+
+ i2c_fuel: i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fuelgauge at 36 {
+ compatible = "maxim,max17040";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>;
+ reg = <0x36>;
+ };
+ };
+};
+
+&fimd {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_clk &lcd_data24>;
+ status = "okay";
+
+ samsung,invert-vden;
+ samsung,invert-vclk;
+
+ display-timings {
+ timing-0 {
+ /* 480x800 at 60Hz */
+ clock-frequency = <25628040>;
+ hactive = <480>;
+ vactive = <800>;
+ hfront-porch = <16>;
+ hback-porch = <16>;
+ hsync-len = <2>;
+ vfront-porch = <28>;
+ vback-porch = <1>;
+ vsync-len = <2>;
+ };
+ };
+};
+
+&hsotg {
+ vusb_a-supply = <&ldo8_reg>;
+ vusb_d-supply = <&ldo3_reg>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&pinctrl0 {
+ wlan_bt_en: wlan-bt-en {
+ samsung,pins = "gpb-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-val = <1>;
+ };
+
+ wlan_gpio_rst: wlan-gpio-rst {
+ samsung,pins = "gpg1-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ };
+
+ wifi_host_wake: wifi-host-wake {
+ samsung,pins = "gph2-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ tf_detect: tf-detect {
+ samsung,pins = "gph3-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ wifi_wake: wifi-wake {
+ samsung,pins = "gph3-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ };
+};
+
+&sdhci1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ max-frequency = <38400000>;
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>;
+ pinctrl-names = "default";
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ status = "okay";
+
+ wlan at 1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gph2>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&sdhci2 {
+ bus-width = <4>;
+ cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&ldo5_reg>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+ vbus-supply = <&safe1_sreg>;
+};
+
+&xusbxti {
+ clock-frequency = <24000000>;
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v4 1/5] ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones
2018-07-07 10:09 ` [PATCH v4 1/5] ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones Paweł Chmiel
@ 2018-07-07 10:29 ` Krzysztof Kozlowski
0 siblings, 0 replies; 14+ messages in thread
From: Krzysztof Kozlowski @ 2018-07-07 10:29 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Jul 07, 2018 at 12:09:39PM +0200, Pawe? Chmiel wrote:
> This DTS file have initial support Samsung Aries based phones.
> Initial version have support for:
> - sdcard
> - internal memory (present only on non 4g variant)
> - max8998 pmic and rtc
> - max17040 fuel gauge
> - gpio keys
> - fimd (no panel driver yet)
> - usb (peripherial mode)
> - wifi
>
> Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
> ---
> Changes from v3:
> - Fix dts warnings
>
> Changes from v2:
> - Restored pinctrl nodes order
> - Correct order of nodes
>
> Changes from v1:
> - Removed duplicated and unneeded headers
> - Corrected node names
> - Added missing spaces
> - Removed unneeded pinctrl and sorted entries
> - Set correct interrupt type for max8998 pmic
> - Add missing regulators
> ---
> ---
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v4 2/5] ARM: dts: s5pv210: Add initial DTS for Samsung Galaxy S phone
2018-07-07 10:09 [PATCH v4 0/5] Initial support for Samsung Galaxy S and Galaxy S 4G Paweł Chmiel
2018-07-07 10:09 ` [PATCH v4 1/5] ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones Paweł Chmiel
@ 2018-07-07 10:09 ` Paweł Chmiel
2018-07-07 10:33 ` Krzysztof Kozlowski
2018-07-07 10:09 ` [PATCH v4 3/5] ARM: dts: s5pv210: Add initial DTS for SGH-T959P phone Paweł Chmiel
` (3 subsequent siblings)
5 siblings, 1 reply; 14+ messages in thread
From: Paweł Chmiel @ 2018-07-07 10:09 UTC (permalink / raw)
To: linux-arm-kernel
This DTS file have initial support Samsung Galaxy S phone,
also known as i9000.
It belongs to Samsung Aries devices family.
Initial version have support for:
- sdcard
- internal memory
- max8998 pmic and rtc
- max17040 fuel gauge
- gpio keys
- fimd (no panel driver yet)
- usb (peripherial mode)
- wifi
Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
--
Changes from v1:
- Added missing commit msg
- Removed duplicated and unneeded headers
- Added stdout-path
- Added information why we hardcode bootargs
---
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/s5pv210-galaxys.dts | 77 +++++++++++++++++++++++++++++++++++
2 files changed, 78 insertions(+)
create mode 100644 arch/arm/boot/dts/s5pv210-galaxys.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e2424957809..522ebdca1d3d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -846,6 +846,7 @@ dtb-$(CONFIG_ARCH_S3C64XX) += \
s3c6410-smdk6410.dtb
dtb-$(CONFIG_ARCH_S5PV210) += \
s5pv210-aquila.dtb \
+ s5pv210-galaxys.dtb \
s5pv210-goni.dtb \
s5pv210-smdkc110.dtb \
s5pv210-smdkv210.dtb \
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
new file mode 100644
index 000000000000..842276749717
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "s5pv210-aries.dtsi"
+
+/ {
+ model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210";
+ compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210";
+
+ chosen {
+ stdout-path = &uart2;
+ /*
+ * It's hard to change those parameters in stock bootloader,
+ * since it requires special hardware/cable.
+ * Let's hardocde bootargs for now, till u-boot port is finished,
+ * with which it should be easier.
+ */
+ bootargs = "root=/dev/mmcblk2p1 rw rootwait ignore_loglevel earlyprintk";
+ };
+
+ nand_pwrseq: nand-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpj2 7 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&massmemory_en>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "power";
+ gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ vol-down {
+ label = "volume_down";
+ gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ vol-up {
+ label = "volume_up";
+ gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ home {
+ label = "home";
+ gpios = <&gph3 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ wakeup-source;
+ };
+ };
+};
+
+&pinctrl0 {
+ massmemory_en: massmemory-en {
+ samsung,pins = "gpj2-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+};
+
+&sdhci0 {
+ bus-width = <4>;
+ non-removable;
+ mmc-pwrseq = <&nand_pwrseq>;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v4 2/5] ARM: dts: s5pv210: Add initial DTS for Samsung Galaxy S phone
2018-07-07 10:09 ` [PATCH v4 2/5] ARM: dts: s5pv210: Add initial DTS for Samsung Galaxy S phone Paweł Chmiel
@ 2018-07-07 10:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 14+ messages in thread
From: Krzysztof Kozlowski @ 2018-07-07 10:33 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Jul 07, 2018 at 12:09:40PM +0200, Pawe? Chmiel wrote:
> This DTS file have initial support Samsung Galaxy S phone,
> also known as i9000.
> It belongs to Samsung Aries devices family.
> Initial version have support for:
> - sdcard
> - internal memory
> - max8998 pmic and rtc
> - max17040 fuel gauge
> - gpio keys
> - fimd (no panel driver yet)
> - usb (peripherial mode)
> - wifi
>
> Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
>
> --
> Changes from v1:
> - Added missing commit msg
> - Removed duplicated and unneeded headers
> - Added stdout-path
> - Added information why we hardcode bootargs
> ---
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/s5pv210-galaxys.dts | 77 +++++++++++++++++++++++++++++++++++
> 2 files changed, 78 insertions(+)
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v4 3/5] ARM: dts: s5pv210: Add initial DTS for SGH-T959P phone
2018-07-07 10:09 [PATCH v4 0/5] Initial support for Samsung Galaxy S and Galaxy S 4G Paweł Chmiel
2018-07-07 10:09 ` [PATCH v4 1/5] ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones Paweł Chmiel
2018-07-07 10:09 ` [PATCH v4 2/5] ARM: dts: s5pv210: Add initial DTS for Samsung Galaxy S phone Paweł Chmiel
@ 2018-07-07 10:09 ` Paweł Chmiel
2018-07-07 10:33 ` Krzysztof Kozlowski
2018-07-07 10:09 ` [PATCH v4 4/5] dt-bindings: samsung: Document bindings for Samsung aries boards Paweł Chmiel
` (2 subsequent siblings)
5 siblings, 1 reply; 14+ messages in thread
From: Paweł Chmiel @ 2018-07-07 10:09 UTC (permalink / raw)
To: linux-arm-kernel
From: Jonathan Bakker <xc-racer2@live.ca>
This DTS file have initial support Samsung SGH-T959P phone,
also known as Samsung Galaxy S 4G or fascinate4g.
It belongs to Samsung Aries devices family.
Initial version have support for:
- sdcard
- max8998 pmic and rtc
- max17040 fuel gauge
- gpio keys
- fimd (no panel driver yet)
- usb (peripherial mode)
- wifi
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
Changes from v1:
- Added missing commit msg
- Removed duplicated and unneeded headers
- Added stdout-path
- Added information why we hardcode bootargs
---
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/s5pv210-fascinate4g.dts | 45 +++++++++++++++++++++++++++++++
2 files changed, 46 insertions(+)
create mode 100644 arch/arm/boot/dts/s5pv210-fascinate4g.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 522ebdca1d3d..d00e995875bb 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -846,6 +846,7 @@ dtb-$(CONFIG_ARCH_S3C64XX) += \
s3c6410-smdk6410.dtb
dtb-$(CONFIG_ARCH_S5PV210) += \
s5pv210-aquila.dtb \
+ s5pv210-fascinate4g.dtb \
s5pv210-galaxys.dtb \
s5pv210-goni.dtb \
s5pv210-smdkc110.dtb \
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
new file mode 100644
index 000000000000..ccf761b1babf
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "s5pv210-aries.dtsi"
+
+/ {
+ model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210";
+ compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210";
+
+ chosen {
+ stdout-path = &uart2;
+ /*
+ * It's hard to change those parameters in stock bootloader,
+ * since it requires special hardware/cable.
+ * Let's hardocde bootargs for now, till u-boot port is finished,
+ * with which it should be easier.
+ */
+ bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "power";
+ gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ vol-down {
+ label = "volume_down";
+ gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ vol-up {
+ label = "volume_up";
+ gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v4 3/5] ARM: dts: s5pv210: Add initial DTS for SGH-T959P phone
2018-07-07 10:09 ` [PATCH v4 3/5] ARM: dts: s5pv210: Add initial DTS for SGH-T959P phone Paweł Chmiel
@ 2018-07-07 10:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 14+ messages in thread
From: Krzysztof Kozlowski @ 2018-07-07 10:33 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Jul 07, 2018 at 12:09:41PM +0200, Pawe? Chmiel wrote:
> From: Jonathan Bakker <xc-racer2@live.ca>
>
> This DTS file have initial support Samsung SGH-T959P phone,
> also known as Samsung Galaxy S 4G or fascinate4g.
> It belongs to Samsung Aries devices family.
> Initial version have support for:
> - sdcard
> - max8998 pmic and rtc
> - max17040 fuel gauge
> - gpio keys
> - fimd (no panel driver yet)
> - usb (peripherial mode)
> - wifi
>
> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
> Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
> ---
>
> Changes from v1:
> - Added missing commit msg
> - Removed duplicated and unneeded headers
> - Added stdout-path
> - Added information why we hardcode bootargs
> ---
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/s5pv210-fascinate4g.dts | 45 +++++++++++++++++++++++++++++++
> 2 files changed, 46 insertions(+)
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v4 4/5] dt-bindings: samsung: Document bindings for Samsung aries boards
2018-07-07 10:09 [PATCH v4 0/5] Initial support for Samsung Galaxy S and Galaxy S 4G Paweł Chmiel
` (2 preceding siblings ...)
2018-07-07 10:09 ` [PATCH v4 3/5] ARM: dts: s5pv210: Add initial DTS for SGH-T959P phone Paweł Chmiel
@ 2018-07-07 10:09 ` Paweł Chmiel
2018-07-07 10:33 ` Krzysztof Kozlowski
2018-07-07 10:09 ` [PATCH v4 5/5] dt-bindings: samsung: Document bindings for SGH-T959P board Paweł Chmiel
2018-07-10 12:05 ` [PATCH v4 0/5] Initial support for Samsung Galaxy S and Galaxy S 4G Pavel Machek
5 siblings, 1 reply; 14+ messages in thread
From: Paweł Chmiel @ 2018-07-07 10:09 UTC (permalink / raw)
To: linux-arm-kernel
Document the binding for Samsung Galaxy S (i9000) phone
and whole Samsung Aries devices family (based on S5PV210).
Also because this is first not Exynos-based devices, document this information
at beginning of file.
Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
--
Changes from v2:
- Squashed with patch which was documenting existence
of non Exynos-based boards
- Added reviewed-by
Changes from v1:
- Added missing commit msg.
--
---
Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 14510b215480..3fa287a86300 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -1,7 +1,9 @@
-* Samsung's Exynos SoC based boards
+* Samsung's Exynos and S5P SoC based boards
Required root node properties:
- compatible = should be one or more of the following.
+ - "samsung,aries" - for S5PV210-based Samsung Aries board.
+ - "samsung,galaxys" - for S5PV210-based Samsung Galaxy S (i9000) board.
- "samsung,artik5" - for Exynos3250-based Samsung ARTIK5 module.
- "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board.
- "samsung,monk" - for Exynos3250-based Samsung Simband board.
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v4 4/5] dt-bindings: samsung: Document bindings for Samsung aries boards
2018-07-07 10:09 ` [PATCH v4 4/5] dt-bindings: samsung: Document bindings for Samsung aries boards Paweł Chmiel
@ 2018-07-07 10:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 14+ messages in thread
From: Krzysztof Kozlowski @ 2018-07-07 10:33 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Jul 07, 2018 at 12:09:42PM +0200, Pawe? Chmiel wrote:
> Document the binding for Samsung Galaxy S (i9000) phone
> and whole Samsung Aries devices family (based on S5PV210).
>
> Also because this is first not Exynos-based devices, document this information
> at beginning of file.
>
> Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> --
> Changes from v2:
> - Squashed with patch which was documenting existence
> of non Exynos-based boards
> - Added reviewed-by
>
> Changes from v1:
> - Added missing commit msg.
> --
> ---
> Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v4 5/5] dt-bindings: samsung: Document bindings for SGH-T959P board
2018-07-07 10:09 [PATCH v4 0/5] Initial support for Samsung Galaxy S and Galaxy S 4G Paweł Chmiel
` (3 preceding siblings ...)
2018-07-07 10:09 ` [PATCH v4 4/5] dt-bindings: samsung: Document bindings for Samsung aries boards Paweł Chmiel
@ 2018-07-07 10:09 ` Paweł Chmiel
2018-07-07 10:33 ` Krzysztof Kozlowski
2018-07-10 12:05 ` [PATCH v4 0/5] Initial support for Samsung Galaxy S and Galaxy S 4G Pavel Machek
5 siblings, 1 reply; 14+ messages in thread
From: Paweł Chmiel @ 2018-07-07 10:09 UTC (permalink / raw)
To: linux-arm-kernel
From: Jonathan Bakker <xc-racer2@live.ca>
Document the binding for Samsung Galaxy S Fascinate 4G (SGH-T959P).
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
--
Changes from v2:
- Added Acked-by
Changes from v1:
- Added missing commit msg.
--
---
Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 3fa287a86300..37e96e48c48c 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -3,6 +3,7 @@
Required root node properties:
- compatible = should be one or more of the following.
- "samsung,aries" - for S5PV210-based Samsung Aries board.
+ - "samsung,fascinate4g" - for S5PV210-based Samsung Galaxy S Fascinate 4G (SGH-T959P) board.
- "samsung,galaxys" - for S5PV210-based Samsung Galaxy S (i9000) board.
- "samsung,artik5" - for Exynos3250-based Samsung ARTIK5 module.
- "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board.
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v4 5/5] dt-bindings: samsung: Document bindings for SGH-T959P board
2018-07-07 10:09 ` [PATCH v4 5/5] dt-bindings: samsung: Document bindings for SGH-T959P board Paweł Chmiel
@ 2018-07-07 10:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 14+ messages in thread
From: Krzysztof Kozlowski @ 2018-07-07 10:33 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Jul 07, 2018 at 12:09:43PM +0200, Pawe? Chmiel wrote:
> From: Jonathan Bakker <xc-racer2@live.ca>
>
> Document the binding for Samsung Galaxy S Fascinate 4G (SGH-T959P).
>
> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
> Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
> Acked-by: Rob Herring <robh@kernel.org>
> --
> Changes from v2:
> - Added Acked-by
>
> Changes from v1:
> - Added missing commit msg.
> --
> ---
> Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt | 1 +
> 1 file changed, 1 insertion(+)
>
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v4 0/5] Initial support for Samsung Galaxy S and Galaxy S 4G
2018-07-07 10:09 [PATCH v4 0/5] Initial support for Samsung Galaxy S and Galaxy S 4G Paweł Chmiel
` (4 preceding siblings ...)
2018-07-07 10:09 ` [PATCH v4 5/5] dt-bindings: samsung: Document bindings for SGH-T959P board Paweł Chmiel
@ 2018-07-10 12:05 ` Pavel Machek
2018-07-10 12:18 ` Paweł Chmiel
5 siblings, 1 reply; 14+ messages in thread
From: Pavel Machek @ 2018-07-10 12:05 UTC (permalink / raw)
To: linux-arm-kernel
Hi!
> This patch series adds support for Samsung Galaxy S and Galaxy S 4G.
> Both are commercial phone based on Aries family.
Thanks for doing this. What kind of userspace are your running?
(I do have N900 here running Debian and PostmarketOS, and Droid 4
running Maemo Leste)
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180710/42efe1e3/attachment.sig>
^ permalink raw reply [flat|nested] 14+ messages in thread* [PATCH v4 0/5] Initial support for Samsung Galaxy S and Galaxy S 4G
2018-07-10 12:05 ` [PATCH v4 0/5] Initial support for Samsung Galaxy S and Galaxy S 4G Pavel Machek
@ 2018-07-10 12:18 ` Paweł Chmiel
2018-08-01 18:58 ` Pavel Machek
0 siblings, 1 reply; 14+ messages in thread
From: Paweł Chmiel @ 2018-07-10 12:18 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday, July 10, 2018 2:05:04 PM CEST Pavel Machek wrote:
> Hi!
>
> > This patch series adds support for Samsung Galaxy S and Galaxy S 4G.
> > Both are commercial phone based on Aries family.
>
> Thanks for doing this. What kind of userspace are your running?
>
> (I do have N900 here running Debian and PostmarketOS, and Droid 4
> running Maemo Leste)
Currently i'm running arch linux arm (but wanted to try PostmarketOS also).
If anyone is interested/wanted to help:
https://github.com/PabloPL/linux -> all kernel development is done here (there are more working things than in this patchset)
https://github.com/xc-racer99/u-boot-galaxys4g -> here is initlal port of uboot for aries family. It can be flashed as kernel (more details in wiki)
>
> Best regards,
> Pavel
>
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v4 0/5] Initial support for Samsung Galaxy S and Galaxy S 4G
2018-07-10 12:18 ` Paweł Chmiel
@ 2018-08-01 18:58 ` Pavel Machek
0 siblings, 0 replies; 14+ messages in thread
From: Pavel Machek @ 2018-08-01 18:58 UTC (permalink / raw)
To: linux-arm-kernel
On Tue 2018-07-10 14:18:39, Pawe? Chmiel wrote:
> On Tuesday, July 10, 2018 2:05:04 PM CEST Pavel Machek wrote:
> > Hi!
> >
> > > This patch series adds support for Samsung Galaxy S and Galaxy S 4G.
> > > Both are commercial phone based on Aries family.
> >
> > Thanks for doing this. What kind of userspace are your running?
> >
> > (I do have N900 here running Debian and PostmarketOS, and Droid 4
> > running Maemo Leste)
>
> Currently i'm running arch linux arm (but wanted to try PostmarketOS also).
>
Depending on your goals, Maemo Leste is worth looking at, too. (Unlike
postmarketOS, their goal is useful phone).
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180801/2057a2fe/attachment.sig>
^ permalink raw reply [flat|nested] 14+ messages in thread