From: mark.rutland@arm.com (Mark Rutland)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv5 02/21] arm64: move SCTLR_EL{1, 2} assertions to <asm/sysreg.h>
Date: Wed, 11 Jul 2018 14:56:37 +0100 [thread overview]
Message-ID: <20180711135656.20670-3-mark.rutland@arm.com> (raw)
In-Reply-To: <20180711135656.20670-1-mark.rutland@arm.com>
Currently we assert that the SCTLR_EL{1,2}_{SET,CLEAR} bits are
self-consistent with an assertion in config_sctlr_el1(). This is a bit
unusual, since config_sctlr_el1() doesn't make use of these definitions,
and is far away from the definitions themselves.
We can use the CPP #error directive to have equivalent assertions in
<asm/sysreg.h>, next to the definitions of the set/clear bits, which is
a bit clearer and simpler.
At the same time, lets fill in the upper 32 bits for both registers in
their respective RES0 definitions. This could be a little nicer with
GENMASK_ULL(63, 32), but this currently lives in <linux/bitops.h>, which
cannot safely be included from assembly, as <asm/sysreg.h> can.
Note the when the preprocessor evaluates an expression for an #if
directive, all signed or unsigned values are treated as intmax_t or
uintmax_t respectively. To avoid ambiguity, we define explicitly define
the mask of all 64 bits.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
arch/arm64/include/asm/sysreg.h | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index a8f84812c6e8..fefc17dae8ee 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -436,7 +436,8 @@
#define SCTLR_EL2_RES0 ((1 << 6) | (1 << 7) | (1 << 8) | (1 << 9) | \
(1 << 10) | (1 << 13) | (1 << 14) | (1 << 15) | \
(1 << 17) | (1 << 20) | (1 << 24) | (1 << 26) | \
- (1 << 27) | (1 << 30) | (1 << 31))
+ (1 << 27) | (1 << 30) | (1 << 31) | \
+ (0xffffffffUL << 32))
#ifdef CONFIG_CPU_BIG_ENDIAN
#define ENDIAN_SET_EL2 SCTLR_ELx_EE
@@ -452,9 +453,9 @@
SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_WXN | \
ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0)
-/* Check all the bits are accounted for */
-#define SCTLR_EL2_BUILD_BUG_ON_MISSING_BITS BUILD_BUG_ON((SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != ~0)
-
+#if (SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != 0xffffffffffffffff
+#error "Inconsistent SCTLR_EL2 set/clear bits"
+#endif
/* SCTLR_EL1 specific flags. */
#define SCTLR_EL1_UCI (1 << 26)
@@ -473,7 +474,8 @@
#define SCTLR_EL1_RES1 ((1 << 11) | (1 << 20) | (1 << 22) | (1 << 28) | \
(1 << 29))
#define SCTLR_EL1_RES0 ((1 << 6) | (1 << 10) | (1 << 13) | (1 << 17) | \
- (1 << 27) | (1 << 30) | (1 << 31))
+ (1 << 27) | (1 << 30) | (1 << 31) | \
+ (0xffffffffUL << 32))
#ifdef CONFIG_CPU_BIG_ENDIAN
#define ENDIAN_SET_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE)
@@ -492,8 +494,9 @@
SCTLR_EL1_UMA | SCTLR_ELx_WXN | ENDIAN_CLEAR_EL1 |\
SCTLR_EL1_RES0)
-/* Check all the bits are accounted for */
-#define SCTLR_EL1_BUILD_BUG_ON_MISSING_BITS BUILD_BUG_ON((SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != ~0)
+#if (SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != 0xffffffffffffffff
+#error "Inconsistent SCTLR_EL1 set/clear bits"
+#endif
/* id_aa64isar0 */
#define ID_AA64ISAR0_TS_SHIFT 52
@@ -743,9 +746,6 @@ static inline void config_sctlr_el1(u32 clear, u32 set)
{
u32 val;
- SCTLR_EL2_BUILD_BUG_ON_MISSING_BITS;
- SCTLR_EL1_BUILD_BUG_ON_MISSING_BITS;
-
val = read_sysreg(sctlr_el1);
val &= ~clear;
val |= set;
--
2.11.0
next prev parent reply other threads:[~2018-07-11 13:56 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-11 13:56 [PATCHv5 00/21] arm64: invoke syscalls with pt_regs Mark Rutland
2018-07-11 13:56 ` [PATCHv5 01/21] arm64: consistently use unsigned long for thread flags Mark Rutland
2018-07-11 13:56 ` Mark Rutland [this message]
2018-07-11 13:56 ` [PATCHv5 03/21] arm64: kill config_sctlr_el1() Mark Rutland
2018-07-11 13:56 ` [PATCHv5 04/21] arm64: kill change_cpacr() Mark Rutland
2018-07-11 13:56 ` [PATCHv5 05/21] arm64: move sve_user_{enable, disable} to <asm/fpsimd.h> Mark Rutland
2018-07-11 13:56 ` [PATCHv5 06/21] arm64: remove sigreturn wrappers Mark Rutland
2018-07-11 13:56 ` [PATCHv5 07/21] arm64: introduce syscall_fn_t Mark Rutland
2018-07-11 13:56 ` [PATCHv5 08/21] arm64: convert raw syscall invocation to C Mark Rutland
2018-07-11 13:56 ` [PATCHv5 09/21] arm64: convert syscall trace logic " Mark Rutland
2018-07-11 13:56 ` [PATCHv5 10/21] arm64: convert native/compat syscall entry " Mark Rutland
2018-07-11 13:56 ` [PATCHv5 11/21] arm64: don't restore GPRs when context tracking Mark Rutland
2018-07-11 13:56 ` [PATCHv5 12/21] arm64: don't reload GPRs after apply_ssbd Mark Rutland
2018-07-11 13:56 ` [PATCHv5 13/21] arm64: zero GPRs upon entry from EL0 Mark Rutland
2018-07-11 13:56 ` [PATCHv5 14/21] arm64: drop alignment from syscall tables Mark Rutland
2018-07-11 13:56 ` [PATCHv5 15/21] kernel: add ksys_personality() Mark Rutland
2018-07-11 13:56 ` [PATCHv5 16/21] kernel: add kcompat_sys_{f,}statfs64() Mark Rutland
2018-07-11 13:56 ` [PATCHv5 17/21] arm64: remove in-kernel call to sys_personality() Mark Rutland
2018-07-11 13:56 ` [PATCHv5 18/21] arm64: use {COMPAT,}SYSCALL_DEFINE0 for sigreturn Mark Rutland
2018-07-11 13:56 ` [PATCHv5 19/21] arm64: use SYSCALL_DEFINE6() for mmap Mark Rutland
2018-07-11 13:56 ` [PATCHv5 20/21] arm64: convert compat wrappers to C Mark Rutland
2018-07-11 13:56 ` [PATCHv5 21/21] arm64: implement syscall wrappers Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180711135656.20670-3-mark.rutland@arm.com \
--to=mark.rutland@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).