From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Thu, 12 Jul 2018 09:23:38 +0200 Subject: [PATCH 2/2] ARM: sun8i: h3: add SY8113B regulator on Banana Pi M2 Zero board In-Reply-To: <20180711134450.43148-1-icenowy@aosc.io> References: <20180711134450.43148-1-icenowy@aosc.io> Message-ID: <20180712072338.zxhzm5rdhmlorjjj@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Jul 11, 2018 at 09:44:50PM +0800, Icenowy Zheng wrote: > Banana Pi M2 Zero board has a SY8113B regulator, which is controlled via > GPIO and capable of outputing 1.1V when the PL1 GPIO is set to output 0 > or 1.1V when the PL6 GPIO is set to input or output 1, and the output is > the power supply of the ARM cores in H3 SoC. > > Add the device tree node of this regulator and set the cpu's cpu-supply > property to it. > > Signed-off-by: Icenowy Zheng Applied, thanks! Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: