[GIT PULL 1/6 v2] Broadcom defconfig changes for 4.19

[GIT PULL 1/6 v2] Broadcom defconfig changes for 4.19

[Florian Fainelli]

The following changes since commit ce397d215ccd07b8ae3f71db689aedb85d56ab40:

  Linux 4.18-rc1 (2018-06-17 08:04:49 +0900)

are available in the git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.19/defconfig

for you to fetch changes up to b0ba9fad81e419f85829c2a6925110d9714dd708:

  Merge tag 'bcm2835-defconfig-next-2018-07-03' into defconfig/next (2018-07-09 05:23:16 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs defconfig updates
for 4.19, please pull the following:

- Stefan enables the Raspberry Pi voltage sensor driver (HWMON) in both
  multi_v7_defconfig and bcm2835_defconfig

----------------------------------------------------------------
Florian Fainelli (1):
      Merge tag 'bcm2835-defconfig-next-2018-07-03' into defconfig/next

Stefan Wahren (2):
      ARM: bcm2835_defconfig: Enable RPi voltage sensor
      ARM: multi_v7_defconfig: Enable RPi voltage sensor

 arch/arm/configs/bcm2835_defconfig  | 2 +-
 arch/arm/configs/multi_v7_defconfig | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

[GIT PULL 2/6 v2] Broadcom defconfig-arm64 changes for 4.19

[Florian Fainelli]

The following changes since commit ce397d215ccd07b8ae3f71db689aedb85d56ab40:

  Linux 4.18-rc1 (2018-06-17 08:04:49 +0900)

are available in the git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.19/defconfig-arm64

for you to fetch changes up to 163efb68d110d392b54e078ca041f24a4ea7d022:

  arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG (2018-07-09 10:40:23 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM64-based SoCs defconfig changes
for 4.19, please pull the following changes:

- Stefan enables the Raspberry Pi voltage sensor driver (HWMON) in the
  arm64 defconfig file

- Ray enables the ARM SP805 watchdog driver in the arm64 defconfig file

----------------------------------------------------------------
Florian Fainelli (1):
      Merge tag 'bcm2835-defconfig-64-next-2018-07-03' into defconfig-arm64/next

Ray Jui (1):
      arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG

Stefan Wahren (1):
      arm64: defconfig: Enable RPi voltage sensor

 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)

[GIT PULL 3/6 v2] Broadcom devicetree changes for 4.19

[Florian Fainelli]

The following changes since commit ce397d215ccd07b8ae3f71db689aedb85d56ab40:

  Linux 4.18-rc1 (2018-06-17 08:04:49 +0900)

are available in the git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.19/devicetree

for you to fetch changes up to 3be77fe8c3f138cbab68d9c745c2038607286b24:

  Merge tag 'bcm2835-dt-next-2018-07-03' into devicetree/next (2018-07-09 08:12:15 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.19, please pull the following:

- Clement adds ethernet aliases to the Cygnus DTS include file such that
  a DT aware bootloader such as u-boot can properly insert MAC addresses

- Mohamed adds a Device Tree node for the HWRNG found on Cygnus SoCs

- Vivek migrates all the BCM5301x (Northstar) Device Tree sources to use
  the proper USB 3.0 PHY representation using its parent MDIO bus.
  Vivek also completes the Linksys EA9500 Device Tree by adding support
  for LEDs, internal and external switches.

- Rafal adds the ARM architected timer to the BCM53573 Device Tree
  include file.

- Eric adds the Performance Monitoring Unit to the BCM2837 DTS include
  file since it was absent before

- Boris adds the BCM283x transposer block to the Device Tree

- Stefan adds the Raspberry Pi Compute Module (CM1) Device Tree include
  and sources.

----------------------------------------------------------------
Boris Brezillon (1):
      ARM: dts: bcm283x: Add Transposer block

Cl?ment P?ron (1):
      ARM: dts: cygnus: add ethernet0 alias

Eric Anholt (1):
      ARM: dts: bcm283x: Add the PMU to the devicetree.

Florian Fainelli (1):
      Merge tag 'bcm2835-dt-next-2018-07-03' into devicetree/next

Mohamed Ismail Abdul Packir Mohamed (1):
      ARM: dts: cygnus: enable iproc-hwrng

Rafa? Mi?ecki (1):
      ARM: dts: BCM53573: Add architected timer

Stefan Wahren (1):
      ARM: dts: add Raspberry Pi Compute Module and IO board

Vivek Unune (2):
      ARM: dts: BCM5301X: Make USB 3.0 PHY use MDIO PHY driver
      ARM: dts: BCM5301X: Add support for Linksys EA9500

 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |   9 +
 arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts          |  88 ++++++++
 arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi             |  34 +++
 arch/arm/boot/dts/bcm2837.dtsi                     |   6 +
 arch/arm/boot/dts/bcm283x.dtsi                     |   6 +
 arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts        |   4 +
 arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts        |   4 +
 arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  |   4 +
 arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts    |   4 +
 arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts       |   4 +
 arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts       |   4 +
 arch/arm/boot/dts/bcm4708-netgear-r6250.dts        |   4 +
 arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts     |   4 +
 arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts      |   4 +
 arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts        |   4 +
 arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts |   4 +
 arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts  |   4 +
 arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts      |   4 +
 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts      |   4 +
 arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts |   4 +
 arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts        |   4 +
 arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts  |   4 +
 arch/arm/boot/dts/bcm4709-linksys-ea9200.dts       |   4 +
 arch/arm/boot/dts/bcm4709-netgear-r7000.dts        |   4 +
 arch/arm/boot/dts/bcm4709-netgear-r8000.dts        |   4 +
 arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts  |   4 +
 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts      |   4 +
 arch/arm/boot/dts/bcm47094-linksys-panamera.dts    | 233 +++++++++++++++++++++
 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts      |   4 +
 arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts      |   4 +
 arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts      |   4 +
 arch/arm/boot/dts/bcm47094-netgear-r8500.dts       |   4 +
 arch/arm/boot/dts/bcm47094.dtsi                    |   7 +-
 arch/arm/boot/dts/bcm5301x.dtsi                    |  35 +++-
 arch/arm/boot/dts/bcm53573.dtsi                    |   8 +
 arch/arm/boot/dts/bcm94708.dts                     |   4 +
 arch/arm/boot/dts/bcm94709.dts                     |   4 +
 arch/arm/boot/dts/bcm953012er.dts                  |   4 +
 arch/arm/boot/dts/bcm953012hr.dts                  |   4 +
 arch/arm/boot/dts/bcm953012k.dts                   |   4 +
 41 files changed, 540 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
 create mode 100644 arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi

[GIT PULL 4/6 v2] Broadcom devicetree-arm64 changes for 4.19

[Florian Fainelli]

The following changes since commit ce397d215ccd07b8ae3f71db689aedb85d56ab40:

  Linux 4.18-rc1 (2018-06-17 08:04:49 +0900)

are available in the git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.19/devicetree-arm64

for you to fetch changes up to e28e681630079204d6d2cb3da1e2c067d21eff64:

  arm64: dts: stingray: add bcm958802a802x dts (2018-07-13 07:24:26 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 4.19, please pull the following:

- Scott does a bunch of updates to the Stingray DTS and DTS include
  files to better support the addition of new boards. Scott also adds
  the Stingray OTP Device Tree node

- Pramod updates the Stingray clocks such that they match the latest
  revision of the ASIC and datasheets

- Ray sets the Stingray initial watchdog timeout to 60 seconds to give
  sufficient time for the kernel to boot and then adds PAXC (internal
  PCIe) support to the Stingray base DTS files

- Vladimir adds support for the Stingray smart NIC PS225 boards variants

----------------------------------------------------------------
Pramod Kumar (1):
      arm64: dts: Update Stingray clock DT nodes

Ray Jui (2):
      arm64: dts: set initial SR watchdog timeout to 60 seconds
      arm64: dts: stingray: add PAXC support

Scott Branden (2):
      arm64: dts: stingray: move common board components to stingray-board-base
      arm64: dts: stingray: Add OTP device node

Vladimir Olovyannikov (1):
      arm64: dts: stingray: add bcm958802a802x dts

 arch/arm64/boot/dts/broadcom/stingray/Makefile     |  2 +
 .../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 35 +-------------
 .../boot/dts/broadcom/stingray/bcm958802a802x.dts  | 26 +++++++++++
 .../dts/broadcom/stingray/stingray-board-base.dtsi | 51 ++++++++++++++++++++
 .../boot/dts/broadcom/stingray/stingray-clock.dtsi | 26 ++++++++---
 .../boot/dts/broadcom/stingray/stingray-pcie.dtsi  | 54 ++++++++++++++++++++++
 .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 19 ++++++++
 7 files changed, 172 insertions(+), 41 deletions(-)
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi

[GIT PULL 5/6 v2] Broadcom drivers changes for 4.19

[Florian Fainelli]

The following changes since commit ce397d215ccd07b8ae3f71db689aedb85d56ab40:

  Linux 4.18-rc1 (2018-06-17 08:04:49 +0900)

are available in the git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.19/drivers

for you to fetch changes up to 5773898b3b32f0e66059031afca5406702e89f9d:

  Merge tag 'bcm2835-drivers-next-2018-07-03' into drivers/next (2018-07-09 10:47:30 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 4.19, please pull the following:

- Doug updates the low-level suspend/resume code for ARM SoCs to support
  the latest rev B3.0 memory controllers found on newer chips with an
  appropriate match structure to perform the correct entry sequencing

- Florian updates the Device Tree binding document for these memory
  controllers to list all possible compatible strings that exist given
   the supported memory controllers.

- Stefan adds the GET_THROTTLED firmware property value that is required
  for the Rasperry Pi voltage monitoring driver and updates the
  Raspberry Pi firmware driver accordingly to register such a device
  using the HWMON subsystem. Finally he adds support for reporting under
  voltage conditions using a specialized HWMON driver.

----------------------------------------------------------------
Doug Berger (1):
      soc: bcm: brcmstb: pm: Add support for newer rev B3.0 controllers

Florian Fainelli (2):
      soc: bcm: brcmstb: Add missing DDR MEMC compatible strings
      Merge tag 'bcm2835-drivers-next-2018-07-03' into drivers/next

Kees Cook (1):
      firmware: raspberrypi: Remove VLA usage

Stefan Wahren (3):
      ARM: bcm2835: Add GET_THROTTLED firmware property
      hwmon: Add support for RPi voltage sensor
      firmware: raspberrypi: Register hwmon driver

 .../devicetree/bindings/arm/bcm/brcm,brcmstb.txt   |   4 +
 Documentation/hwmon/raspberrypi-hwmon              |  22 +++
 drivers/firmware/raspberrypi.c                     |  29 +++-
 drivers/hwmon/Kconfig                              |  10 ++
 drivers/hwmon/Makefile                             |   1 +
 drivers/hwmon/raspberrypi-hwmon.c                  | 166 +++++++++++++++++++++
 drivers/soc/bcm/brcmstb/pm/pm-arm.c                |  16 ++
 include/soc/bcm2835/raspberrypi-firmware.h         |   1 +
 8 files changed, 247 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/hwmon/raspberrypi-hwmon
 create mode 100644 drivers/hwmon/raspberrypi-hwmon.c

[GIT PULL 6/6 v2] Broadcom soc changes for 4.19

[Florian Fainelli]

The following changes since commit ce397d215ccd07b8ae3f71db689aedb85d56ab40:

  Linux 4.18-rc1 (2018-06-17 08:04:49 +0900)

are available in the git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.19/soc

for you to fetch changes up to f3f49e42c119f6fc7cd06ddae495915cf9f65654:

  ARM: debug: fix BCM2836 order entry (2018-06-18 09:30:14 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs platform changes for
4.19, please pull the following:

- Clement re-orders the UART debug entries to be in ascending order and
  he also adds the iProc UART3 debug address since that is a common
  location for iProc based designs.

----------------------------------------------------------------
Cl?ment Peron (2):
      ARM: debug: Add iProc UART3 debug addresses
      ARM: debug: fix BCM2836 order entry

 arch/arm/Kconfig.debug | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)