* [GIT PULL 0/3] ARM: exynos: Pull for v4.19
@ 2018-07-12 16:46 Krzysztof Kozlowski
2018-07-12 16:46 ` [GIT PULL 3/3] ARM: defconfig: " Krzysztof Kozlowski
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2018-07-12 16:46 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Only one unusual about this pull-request - it is based on v4.18-rc2
because at v4.18-rc1 the NFS root boot, which I use at my testing
setup (https://krzk.eu), was broken.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread* [GIT PULL 3/3] ARM: defconfig: Pull for v4.19
2018-07-12 16:46 [GIT PULL 0/3] ARM: exynos: Pull for v4.19 Krzysztof Kozlowski
@ 2018-07-12 16:46 ` Krzysztof Kozlowski
2018-07-14 21:30 ` Olof Johansson
2018-07-12 16:46 ` [GIT PULL 1/3] ARM: dts: exynos: " Krzysztof Kozlowski
2018-07-12 16:46 ` [GIT PULL 2/3] arm64: " Krzysztof Kozlowski
2 siblings, 1 reply; 7+ messages in thread
From: Krzysztof Kozlowski @ 2018-07-12 16:46 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Rebased on v4.18-rc2.
Best regards,
Krzysztof
The following changes since commit 7daf201d7fe8334e2d2364d4e8ed3394ec9af819:
Linux 4.18-rc2 (2018-06-24 20:54:29 +0800)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-defconfig-4.19
for you to fetch changes up to 24ede29d026a9f00aa3f4e7a5531803af4810734:
ARM: s5pv210_defconfig: Enable options needed to boot typical Linux distro (2018-07-07 10:49:16 +0200)
----------------------------------------------------------------
Samsung defconfig changes for v4.19
Enable options needed for booting full system on S5Pv210-based Samsung
Galaxy S mobile phones.
----------------------------------------------------------------
Pawe? Chmiel (3):
ARM: s5pv210_defconfig: Run make savedefconfig
ARM: s5pv210_defconfig: Enable drivers for Samsung Aries based phones
ARM: s5pv210_defconfig: Enable options needed to boot typical Linux distro
arch/arm/configs/s5pv210_defconfig | 49 +++++++++++++++++++++++++++++++++++---
1 file changed, 46 insertions(+), 3 deletions(-)
^ permalink raw reply [flat|nested] 7+ messages in thread* [GIT PULL 3/3] ARM: defconfig: Pull for v4.19
2018-07-12 16:46 ` [GIT PULL 3/3] ARM: defconfig: " Krzysztof Kozlowski
@ 2018-07-14 21:30 ` Olof Johansson
0 siblings, 0 replies; 7+ messages in thread
From: Olof Johansson @ 2018-07-14 21:30 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jul 12, 2018 at 06:46:39PM +0200, Krzysztof Kozlowski wrote:
> Hi,
>
> Rebased on v4.18-rc2.
>
> Best regards,
> Krzysztof
>
>
> The following changes since commit 7daf201d7fe8334e2d2364d4e8ed3394ec9af819:
>
> Linux 4.18-rc2 (2018-06-24 20:54:29 +0800)
>
> are available in the git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-defconfig-4.19
>
> for you to fetch changes up to 24ede29d026a9f00aa3f4e7a5531803af4810734:
>
> ARM: s5pv210_defconfig: Enable options needed to boot typical Linux distro (2018-07-07 10:49:16 +0200)
>
> ----------------------------------------------------------------
> Samsung defconfig changes for v4.19
>
> Enable options needed for booting full system on S5Pv210-based Samsung
> Galaxy S mobile phones.
Thanks!
-Olof
^ permalink raw reply [flat|nested] 7+ messages in thread
* [GIT PULL 1/3] ARM: dts: exynos: Pull for v4.19
2018-07-12 16:46 [GIT PULL 0/3] ARM: exynos: Pull for v4.19 Krzysztof Kozlowski
2018-07-12 16:46 ` [GIT PULL 3/3] ARM: defconfig: " Krzysztof Kozlowski
@ 2018-07-12 16:46 ` Krzysztof Kozlowski
2018-07-14 21:23 ` Olof Johansson
2018-07-12 16:46 ` [GIT PULL 2/3] arm64: " Krzysztof Kozlowski
2 siblings, 1 reply; 7+ messages in thread
From: Krzysztof Kozlowski @ 2018-07-12 16:46 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Rebased on v4.18-rc2.
Best regards,
Krzysztof
The following changes since commit 7daf201d7fe8334e2d2364d4e8ed3394ec9af819:
Linux 4.18-rc2 (2018-06-24 20:54:29 +0800)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt-4.19
for you to fetch changes up to 57f4e8bc1c3ebbd06a278107edeb6af95b53e5bf:
dt-bindings: samsung: Document bindings for SGH-T959P board (2018-07-07 12:28:07 +0200)
----------------------------------------------------------------
Samsung DTS ARM changes for v4.19
1. Add two new S5Pv210 boards: Samsung Galaxy S and Samsung Galaxy S 4G
mobile phones.? Both are from family codenamed Aries.? The Samsung
Galaxy S was released on the market in 2010 with Android operating
system.? At that time, it was the Samsung's flagship model.
? ?This brings support for storage (SD card and internal memory), PMIC,
RTC, fuel-gauge, keys, USB (in peripherial mode) and WiFi.
2. Add missing secondary CPU properties.
3. Cleanup from old files and properties.
----------------------------------------------------------------
Bartlomiej Zolnierkiewicz (1):
ARM: dts: exynos: remove no longer needed samsung thermal properties
Jonathan Bakker (2):
ARM: dts: s5pv210: Add initial DTS for SGH-T959P phone
dt-bindings: samsung: Document bindings for SGH-T959P board
Krzysztof Kozlowski (2):
ARM: dts: exynos: Add missing CPU clocks to secondary CPUs on Exynos542x
dt-bindings: arm: Remove obsolete insignal-boards.txt
Pawe? Chmiel (4):
ARM: dts: s5pv210: Add missing interrupt-controller property to gph2
ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones
ARM: dts: s5pv210: Add initial DTS for Samsung Galaxy S phone
dt-bindings: samsung: Document bindings for Samsung aries boards
Viresh Kumar (1):
arm: dts: exynos: Add missing cooling device properties for CPUs
.../devicetree/bindings/arm/insignal-boards.txt | 8 -
.../bindings/arm/samsung/samsung-boards.txt | 5 +-
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/exynos3250.dtsi | 18 +-
arch/arm/boot/dts/exynos4.dtsi | 2 +-
arch/arm/boot/dts/exynos4210.dtsi | 13 +
arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi | 20 -
arch/arm/boot/dts/exynos4412.dtsi | 9 +
arch/arm/boot/dts/exynos5250.dtsi | 25 +-
arch/arm/boot/dts/exynos5410.dtsi | 8 +-
arch/arm/boot/dts/exynos5420-cpus.dtsi | 6 +
arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi | 21 --
arch/arm/boot/dts/exynos5420.dtsi | 10 +-
arch/arm/boot/dts/exynos5422-cpus.dtsi | 8 +-
arch/arm/boot/dts/s5pv210-aries.dtsi | 419 +++++++++++++++++++++
arch/arm/boot/dts/s5pv210-fascinate4g.dts | 45 +++
arch/arm/boot/dts/s5pv210-galaxys.dts | 77 ++++
arch/arm/boot/dts/s5pv210-pinctrl.dtsi | 2 +
18 files changed, 635 insertions(+), 63 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/insignal-boards.txt
delete mode 100644 arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
delete mode 100644 arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
create mode 100644 arch/arm/boot/dts/s5pv210-aries.dtsi
create mode 100644 arch/arm/boot/dts/s5pv210-fascinate4g.dts
create mode 100644 arch/arm/boot/dts/s5pv210-galaxys.dts
^ permalink raw reply [flat|nested] 7+ messages in thread* [GIT PULL 2/3] arm64: dts: exynos: Pull for v4.19
2018-07-12 16:46 [GIT PULL 0/3] ARM: exynos: Pull for v4.19 Krzysztof Kozlowski
2018-07-12 16:46 ` [GIT PULL 3/3] ARM: defconfig: " Krzysztof Kozlowski
2018-07-12 16:46 ` [GIT PULL 1/3] ARM: dts: exynos: " Krzysztof Kozlowski
@ 2018-07-12 16:46 ` Krzysztof Kozlowski
2018-07-14 21:24 ` Olof Johansson
2 siblings, 1 reply; 7+ messages in thread
From: Krzysztof Kozlowski @ 2018-07-12 16:46 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Rebased on v4.18-rc2.
Best regards,
Krzysztof
The following changes since commit 7daf201d7fe8334e2d2364d4e8ed3394ec9af819:
Linux 4.18-rc2 (2018-06-24 20:54:29 +0800)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt64-4.19
for you to fetch changes up to 17aa1530f1ff89ca4e21765e5f4d9e6bcd464eb2:
arm64: dts: exynos: Remove leading 0x from unit addresses in Exynos5433 (2018-06-25 18:38:49 +0200)
----------------------------------------------------------------
Samsung DTS ARM64 changes for v4.19
Cleanup from old properties and code-style warnings.
----------------------------------------------------------------
Bartlomiej Zolnierkiewicz (1):
arm64: dts: exynos: Remove no longer needed samsung thermal properties
Krzysztof Kozlowski (1):
arm64: dts: exynos: Remove leading 0x from unit addresses in Exynos5433
.../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 20 --------------------
.../boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 19 -------------------
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 14 +++++++-------
.../boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi | 21 ---------------------
arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +-
5 files changed, 8 insertions(+), 68 deletions(-)
delete mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
delete mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
delete mode 100644 arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-07-14 21:30 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-07-12 16:46 [GIT PULL 0/3] ARM: exynos: Pull for v4.19 Krzysztof Kozlowski
2018-07-12 16:46 ` [GIT PULL 3/3] ARM: defconfig: " Krzysztof Kozlowski
2018-07-14 21:30 ` Olof Johansson
2018-07-12 16:46 ` [GIT PULL 1/3] ARM: dts: exynos: " Krzysztof Kozlowski
2018-07-14 21:23 ` Olof Johansson
2018-07-12 16:46 ` [GIT PULL 2/3] arm64: " Krzysztof Kozlowski
2018-07-14 21:24 ` Olof Johansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).