From: joel@jms.id.au (Joel Stanley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: config: multi_v5: Refresh configuration
Date: Wed, 18 Jul 2018 23:23:01 +0930 [thread overview]
Message-ID: <20180718135302.4927-3-joel@jms.id.au> (raw)
In-Reply-To: <20180718135302.4927-1-joel@jms.id.au>
This is the result of a make mutli_v5_defconfig && make savedefconfig.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/configs/multi_v5_defconfig | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 7c41bee28463..b647e249908e 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -1,5 +1,4 @@
CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=19
@@ -11,12 +10,10 @@ CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_MVEBU=y
-CONFIG_MACH_KIRKWOOD=y
-CONFIG_ARCH_AT91=y
-CONFIG_SOC_AT91SAM9=y
CONFIG_ARCH_ASPEED=y
CONFIG_MACH_ASPEED_G4=y
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91SAM9=y
CONFIG_ARCH_MXC=y
CONFIG_MACH_MX21ADS=y
CONFIG_MACH_MX27ADS=y
@@ -25,6 +22,8 @@ CONFIG_MACH_IMX27_VISSTRIM_M10=y
CONFIG_MACH_PCA100=y
CONFIG_MACH_IMX27_DT=y
CONFIG_SOC_IMX25=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_KIRKWOOD=y
CONFIG_ARCH_ORION5X=y
CONFIG_MACH_DB88F5281=y
CONFIG_MACH_RD88F5182=y
@@ -34,7 +33,6 @@ CONFIG_MACH_DNS323=y
CONFIG_MACH_TS209=y
CONFIG_MACH_TERASTATION_PRO2=y
CONFIG_MACH_LINKSTATION_PRO=y
-CONFIG_MACH_LINKSTATION_LSCHL=y
CONFIG_MACH_LINKSTATION_MINI=y
CONFIG_MACH_LINKSTATION_LS_HGL=y
CONFIG_MACH_TS409=y
@@ -71,7 +69,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_DSA=y
-CONFIG_NET_SWITCHDEV=y
CONFIG_NET_PKTGEN=m
CONFIG_CFG80211=y
CONFIG_MAC80211=y
@@ -112,8 +109,8 @@ CONFIG_MACB=y
CONFIG_DM9000=y
CONFIG_MV643XX_ETH=y
CONFIG_R8169=y
-CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
+CONFIG_MARVELL_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_SDIO=y
@@ -125,7 +122,6 @@ CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=6
@@ -172,11 +168,9 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
CONFIG_VIDEO_ATMEL_ISI=m
-CONFIG_SOC_CAMERA_OV2640=m
CONFIG_DRM=y
CONFIG_DRM_ATMEL_HLCDC=m
CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_FB=y
CONFIG_FB_IMX=y
CONFIG_FB_ATMEL=y
CONFIG_BACKLIGHT_ATMEL_LCDC=y
--
2.17.1
next prev parent reply other threads:[~2018-07-18 13:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-18 13:52 [PATCH 0/3] ARM: config: ASPEED and mutli v5 updates for 4.19 Joel Stanley
2018-07-18 13:53 ` [PATCH 1/3] ARM: config: aspeed: Update defconfig Joel Stanley
2018-07-24 4:49 ` Andrew Jeffery
2018-07-18 13:53 ` Joel Stanley [this message]
2018-07-24 4:52 ` [PATCH 2/3] ARM: config: multi_v5: Refresh configuration Andrew Jeffery
2018-07-18 13:53 ` [PATCH 3/3] ARM: config: multi_v5: Enable ASPEED drivers Joel Stanley
2018-07-24 4:56 ` Andrew Jeffery
2018-07-24 4:59 ` Joel Stanley
2018-07-24 5:05 ` Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180718135302.4927-3-joel@jms.id.au \
--to=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).