[PATCH 3/3] ARM: config: multi_v5: Enable ASPEED drivers

linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed

From: joel@jms.id.au (Joel Stanley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] ARM: config: multi_v5: Enable ASPEED drivers
Date: Wed, 18 Jul 2018 23:23:02 +0930	[thread overview]
Message-ID: <20180718135302.4927-4-joel@jms.id.au> (raw)
In-Reply-To: <20180718135302.4927-1-joel@jms.id.au>

This enables the devices used in the AST2400 family of BMC SoCs:

 - VUART
 - SPI NOR
 - LPC controller
 - LPC snoop (port 80)
 - Ethernet
 - GPIO
 - ADC
 - I2C
 - Random number generator
 - IPMI KCS
 - IPMI BT
 - Fan/Tach

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/configs/multi_v5_defconfig | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index b647e249908e..318b76fa26d1 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -90,10 +90,14 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ORION=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_SPI_ASPEED_SMC=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_ATMEL_TCLIB=y
 CONFIG_ATMEL_SSC=m
+CONFIG_ASPEED_LPC_CTRL=m
+CONFIG_ASPEED_LPC_SNOOP=m
 CONFIG_EEPROM_AT24=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
@@ -107,6 +111,7 @@ CONFIG_NET_DSA_MV88E6060=y
 CONFIG_NET_DSA_MV88E6XXX=y
 CONFIG_MACB=y
 CONFIG_DM9000=y
+CONFIG_FTGMAC100=m
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_DAVICOM_PHY=y
@@ -128,16 +133,20 @@ CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_ASPEED_VUART=m
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_SERIAL_ATMEL_TTYAT=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_ASPEED_KCS_IPMI_BMC=m
+CONFIG_ASPEED_BT_IPMI_BMC=m
 CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_ASPEED=m
 CONFIG_I2C_AT91=y
 CONFIG_I2C_IMX=y
 CONFIG_I2C_MV64XXX=y
@@ -146,10 +155,12 @@ CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_ORION=y
+CONFIG_GPIO_ASPEED=m
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y
 CONFIG_SENSORS_ADT7475=y
+CONFIG_SENSORS_ASPEED=y
 CONFIG_SENSORS_G762=y
 CONFIG_SENSORS_LM63=y
 CONFIG_SENSORS_LM75=y
@@ -240,6 +251,7 @@ CONFIG_MV_XOR=y
 CONFIG_STAGING=y
 CONFIG_FB_XGI=y
 CONFIG_IIO=m
+CONFIG_ASPEED_ADC=m
 CONFIG_AT91_ADC=m
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=m
-- 
2.17.1

next prev parent reply	other threads:[~2018-07-18 13:53 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-18 13:52 [PATCH 0/3] ARM: config: ASPEED and mutli v5 updates for 4.19 Joel Stanley
2018-07-18 13:53 ` [PATCH 1/3] ARM: config: aspeed: Update defconfig Joel Stanley
2018-07-24  4:49   ` Andrew Jeffery
2018-07-18 13:53 ` [PATCH 2/3] ARM: config: multi_v5: Refresh configuration Joel Stanley
2018-07-24  4:52   ` Andrew Jeffery
2018-07-18 13:53 ` Joel Stanley [this message]
2018-07-24  4:56   ` [PATCH 3/3] ARM: config: multi_v5: Enable ASPEED drivers Andrew Jeffery
2018-07-24  4:59     ` Joel Stanley
2018-07-24  5:05       ` Andrew Jeffery

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:b647e249908 dfblob:318b76fa26d )
 OR (
bs:"[PATCH 3/3] ARM: config: multi_v5: Enable ASPEED drivers" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180718135302.4927-4-joel@jms.id.au \
    --to=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).