linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: boris.brezillon@bootlin.com (Boris Brezillon)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 3/8] mtd: rawnand: ams-delta: Set port direction once per transfer
Date: Thu, 19 Jul 2018 08:23:18 +0200	[thread overview]
Message-ID: <20180719082318.290abee1@bbrezillon> (raw)
In-Reply-To: <20180718235710.18242-4-jmkrzyszt@gmail.com>

On Thu, 19 Jul 2018 01:57:05 +0200
Janusz Krzysztofik <jmkrzyszt@gmail.com> wrote:

> In its current shape, the driver sets data port direction before each
> byte read/write operation, even during multi-byte transfers.  Optimize
> that by setting the port direction only on first byte of each transfer.

Sounds like premature optimization for something you'll rework when
fully switching to the GPIO consumer API to control the DATA bus.

> 
> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
> ---
>  drivers/mtd/nand/raw/ams-delta.c | 42 ++++++++++++++++++++++++++++++----------
>  1 file changed, 32 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
> index 6ac38e9cfa1a..dfefcd79b420 100644
> --- a/drivers/mtd/nand/raw/ams-delta.c
> +++ b/drivers/mtd/nand/raw/ams-delta.c
> @@ -72,50 +72,72 @@ static const struct mtd_partition partition_info[] = {
>  	  .size		=  3 * SZ_256K },
>  };
>  
> -static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
> +static void ams_delta_write_next_byte(struct mtd_info *mtd, u_char byte)
>  {
>  	struct nand_chip *this = mtd_to_nand(mtd);
>  	struct ams_delta_nand *priv = nand_get_controller_data(this);
> -	void __iomem *io_base = priv->io_base;
>  
> -	writew(0, io_base + OMAP_MPUIO_IO_CNTL);
>  	writew(byte, this->IO_ADDR_W);
>  	gpiod_set_value(priv->gpiod_nwe, 0);
>  	ndelay(40);
>  	gpiod_set_value(priv->gpiod_nwe, 1);
>  }
>  
> -static u_char ams_delta_read_byte(struct mtd_info *mtd)
> +static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
>  {
> -	u_char res;
>  	struct nand_chip *this = mtd_to_nand(mtd);
>  	struct ams_delta_nand *priv = nand_get_controller_data(this);
>  	void __iomem *io_base = priv->io_base;
>  
> +	writew(0, io_base + OMAP_MPUIO_IO_CNTL);
> +
> +	ams_delta_write_next_byte(mtd, byte);
> +}
> +
> +static u_char ams_delta_read_next_byte(struct mtd_info *mtd)
> +{
> +	struct nand_chip *this = mtd_to_nand(mtd);
> +	struct ams_delta_nand *priv = nand_get_controller_data(this);
> +	u_char res;
> +
>  	gpiod_set_value(priv->gpiod_nre, 0);
>  	ndelay(40);
> -	writew(~0, io_base + OMAP_MPUIO_IO_CNTL);
>  	res = readw(this->IO_ADDR_R);
>  	gpiod_set_value(priv->gpiod_nre, 1);
>  
>  	return res;
>  }
>  
> +static u_char ams_delta_read_byte(struct mtd_info *mtd)
> +{
> +	struct nand_chip *this = mtd_to_nand(mtd);
> +	struct ams_delta_nand *priv = nand_get_controller_data(this);
> +	void __iomem *io_base = priv->io_base;
> +
> +	writew(~0, io_base + OMAP_MPUIO_IO_CNTL);
> +
> +	return ams_delta_read_next_byte(mtd);
> +}
> +
>  static void ams_delta_write_buf(struct mtd_info *mtd, const u_char *buf,
>  				int len)
>  {
>  	int i;
>  
> -	for (i=0; i<len; i++)
> -		ams_delta_write_byte(mtd, buf[i]);
> +	if (len > 0)
> +		ams_delta_write_byte(mtd, buf[0]);
> +	for (i = 1; i < len; i++)
> +		ams_delta_write_next_byte(mtd, buf[i]);
>  }
>  
>  static void ams_delta_read_buf(struct mtd_info *mtd, u_char *buf, int len)
>  {
>  	int i;
>  
> -	for (i=0; i<len; i++)
> -		buf[i] = ams_delta_read_byte(mtd);
> +	if (len > 0)
> +		buf[0] = ams_delta_read_byte(mtd);
> +	for (i = 1; i < len; i++)
> +		buf[i] = ams_delta_read_next_byte(mtd);
>  }
>  
>  /*

  reply	other threads:[~2018-07-19  6:23 UTC|newest]

Thread overview: 93+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-18 23:57 [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors for data I/O Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 1/8] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-07-19  6:17   ` Boris Brezillon
2018-07-20 17:57     ` Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 2/8] mtd: rawnand: ams-delta: Write protect device during probe Janusz Krzysztofik
2018-07-19  6:22   ` Boris Brezillon
2018-07-20 18:02     ` Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 3/8] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik
2018-07-19  6:23   ` Boris Brezillon [this message]
2018-07-20 18:12     ` Janusz Krzysztofik
2018-07-20 19:29       ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 4/8] mtd: rawnand: ams-delta: Optimize pointer resolution on read/write Janusz Krzysztofik
2018-07-19  6:25   ` Boris Brezillon
2018-07-20 18:14     ` Janusz Krzysztofik
2018-07-20 19:29       ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 5/8] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik
2018-07-19  6:28   ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 6/8] gpio: omap: Add get/set_multiple() callbacks Janusz Krzysztofik
2018-07-29 20:29   ` Linus Walleij
2018-08-03  1:52     ` Grygorii Strashko
2018-08-03 16:47   ` Linus Walleij
2018-07-18 23:57 ` [RFC PATCH 7/8] mtd: rawnand: ams-delta: Check sanity of data GPIO resource Janusz Krzysztofik
2018-07-19  6:44   ` Boris Brezillon
2018-07-29 20:36     ` Linus Walleij
2018-07-29 21:16       ` Boris Brezillon
2018-07-29 20:33   ` Linus Walleij
2018-07-18 23:57 ` [RFC PATCH 8/8] mtd: rawnand: ams-delta: Use GPIO callbacks for data I/O Janusz Krzysztofik
2018-07-19  6:47   ` Boris Brezillon
2018-07-20 18:38     ` Janusz Krzysztofik
2018-07-20 19:48       ` Boris Brezillon
2018-07-19  6:15 ` [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors " Boris Brezillon
2018-07-20 17:55   ` Janusz Krzysztofik
2018-07-20 19:25     ` Boris Brezillon
2018-08-06 22:29 ` [RFC PATCH v2] mtd: rawnand: ams-delta: Use GPIO API " Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 01/12] mtd: rawnand: ams-delta: Assign mtd->dev.parent, not mtd->owner Janusz Krzysztofik
2018-08-06 23:54     ` Marek Vasut
2018-08-07 21:55       ` Janusz Krzysztofik
2018-08-07 16:57     ` Boris Brezillon
2018-08-06 22:29   ` [RFC PATCH v2 02/12] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-07 16:59     ` Boris Brezillon
2018-08-06 22:29   ` [RFC PATCH v2 03/12] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-08-07 16:59     ` Boris Brezillon
2018-08-10 10:10     ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 04/12] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik
2018-08-07 17:00     ` Boris Brezillon
2018-08-10 10:11     ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 05/12] mtd: rawnand: ams-delta: use GPIO API for data read/write Janusz Krzysztofik
2018-08-06 23:57     ` Marek Vasut
2018-08-07 17:06     ` Boris Brezillon
2018-08-07 17:11       ` Janusz Krzysztofik
2018-08-10 10:25     ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 06/12] ARM: OMAP1: ams-delta: drop obsolete NAND resources Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 07/12] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik
2018-08-07 18:57     ` Boris Brezillon
2018-08-08 16:55       ` Janusz Krzysztofik
2018-08-08 17:42         ` Miquel Raynal
2018-08-06 22:29   ` [RFC PATCH v2 08/12] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik
2018-08-07 17:02     ` Boris Brezillon
2018-08-07 17:15       ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 09/12] gpiolib: Identify GPIO descriptor arrays with direct mapping Janusz Krzysztofik
2018-08-06 23:29     ` Linus Walleij
2018-08-07 16:50       ` Janusz Krzysztofik
2018-08-07 17:10         ` Boris Brezillon
2018-08-07 17:14     ` Boris Brezillon
2018-08-07 17:19       ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 10/12] gpiolib: Introduce bitmap get/set array API extension Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 11/12] mtd: rawnand: ams-delta: Use GPIO API bitmap extension Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 12/12] gpiolib: Add fast processing path to bitmap API functions Janusz Krzysztofik
2018-08-06 23:43     ` Linus Walleij
2018-08-07 17:29       ` Janusz Krzysztofik
2018-08-07 17:47         ` Boris Brezillon
2018-08-10 10:55           ` Linus Walleij
2018-08-13 22:34   ` [PATCH v3 0/7] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 1/7] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 2/7] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 3/7] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 4/7] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 5/7] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-08-16  7:30       ` Boris Brezillon
2018-08-13 22:34     ` [PATCH v3 6/7] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 7/7] mtd: rawnand: ams-delta: use GPIO API for data I/O Janusz Krzysztofik
2018-08-16  7:39       ` Boris Brezillon
2018-11-21 11:08     ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use " Janusz Krzysztofik
2018-11-21 11:08       ` [PATCH v4 1/4] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-11-23 17:02         ` Tony Lindgren
2018-11-21 11:08       ` [PATCH v4 2/4] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik
2018-11-21 11:08       ` [PATCH v4 3/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-11-21 14:53         ` Boris Brezillon
2018-11-21 11:08       ` [PATCH v4 4/4] ARM: OMAP1: ams-delta: Drop obsolete NAND resources Janusz Krzysztofik
2018-11-21 14:56       ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Boris Brezillon
2018-11-23 17:03         ` Tony Lindgren
2018-12-07  8:04           ` Miquel Raynal
2018-12-07 16:10             ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180719082318.290abee1@bbrezillon \
    --to=boris.brezillon@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).