* [PATCH] ARM: dts: berlin: Add missing OPP properties for CPUs
@ 2018-07-20 5:08 Jisheng Zhang
2018-07-20 10:11 ` [PATCH v2] " Jisheng Zhang
0 siblings, 1 reply; 3+ messages in thread
From: Jisheng Zhang @ 2018-07-20 5:08 UTC (permalink / raw)
To: linux-arm-kernel
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing properties (clocks, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
Hi Olof, Arnd,
This is a single patch from berlin-dt for 4.19, so I send it directly
to you, could you please kindly merge it?
Thanks
arch/arm/boot/dts/berlin2.dtsi | 10 ++++++++++
arch/arm/boot/dts/berlin2q.dtsi | 33 +++++++++++++++++++++++++++++++++
2 files changed, 43 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index db67377af266..d2f7d984bba5 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -50,6 +50,16 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <1>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 516a7ce25791..99d6872a6dfc 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -45,6 +45,17 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <1>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
cpu2: cpu at 2 {
@@ -52,6 +63,17 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <2>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
cpu3: cpu at 3 {
@@ -59,6 +81,17 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <3>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
};
--
2.18.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v2] ARM: dts: berlin: Add missing OPP properties for CPUs
2018-07-20 5:08 [PATCH] ARM: dts: berlin: Add missing OPP properties for CPUs Jisheng Zhang
@ 2018-07-20 10:11 ` Jisheng Zhang
2018-07-21 21:29 ` Olof Johansson
0 siblings, 1 reply; 3+ messages in thread
From: Jisheng Zhang @ 2018-07-20 10:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Viresh Kumar <viresh.kumar@linaro.org>
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing properties (clocks, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
Since v1:
- fix author, it's from Viresh. Sorry for making this mistake
arch/arm/boot/dts/berlin2.dtsi | 10 ++++++++++
arch/arm/boot/dts/berlin2q.dtsi | 33 +++++++++++++++++++++++++++++++++
2 files changed, 43 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index db67377af266..d2f7d984bba5 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -50,6 +50,16 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <1>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 516a7ce25791..99d6872a6dfc 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -45,6 +45,17 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <1>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
cpu2: cpu at 2 {
@@ -52,6 +63,17 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <2>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
cpu3: cpu at 3 {
@@ -59,6 +81,17 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <3>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
};
--
2.18.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v2] ARM: dts: berlin: Add missing OPP properties for CPUs
2018-07-20 10:11 ` [PATCH v2] " Jisheng Zhang
@ 2018-07-21 21:29 ` Olof Johansson
0 siblings, 0 replies; 3+ messages in thread
From: Olof Johansson @ 2018-07-21 21:29 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jul 20, 2018 at 06:11:50PM +0800, Jisheng Zhang wrote:
> From: Viresh Kumar <viresh.kumar@linaro.org>
>
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, clock latency) as well to
> make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
> ---
> Since v1:
> - fix author, it's from Viresh. Sorry for making this mistake
Applied, thanks.
-Olof
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-07-21 21:29 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-07-20 5:08 [PATCH] ARM: dts: berlin: Add missing OPP properties for CPUs Jisheng Zhang
2018-07-20 10:11 ` [PATCH v2] " Jisheng Zhang
2018-07-21 21:29 ` Olof Johansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).