* [GIT PULL] am654 changes for v4.19 merge window
@ 2018-07-21 6:05 Tony Lindgren
2018-07-21 22:07 ` Olof Johansson
0 siblings, 1 reply; 5+ messages in thread
From: Tony Lindgren @ 2018-07-21 6:05 UTC (permalink / raw)
To: linux-arm-kernel
From: "Tony Lindgren" <tony@atomide.com>
The following changes since commit ce397d215ccd07b8ae3f71db689aedb85d56ab40:
Linux 4.18-rc1 (2018-06-17 08:04:49 +0900)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/am654-for-v4.19-signed
for you to fetch changes up to d0a064bec75e20a526c7bc0d626912f2660b6e81:
arm64: dts: ti: Add support for AM654 EVM base board (2018-07-18 11:48:36 -0700)
----------------------------------------------------------------
TI AM654 support for v4.19 merge window
This branch adds initial support for new Texas Instruments AM654
quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC
architecture.
Initially only basic devices are configured, support for more devices
will follow later on. And many of the internal devices familiar from
earlier TI SoCs should work with existing kernel device drivers.
----------------------------------------------------------------
Nishanth Menon (5):
dt-bindings: arm: ti: Add bindings for AM654 SoC
arm64: Add support for TI's K3 Multicore SoC architecture
arm64: dts: ti: Add Support for AM654 SoC
soc: ti: Add Support for AM654 SoC config option
arm64: dts: ti: Add support for AM654 EVM base board
Documentation/devicetree/bindings/arm/ti/k3.txt | 23 +++++
MAINTAINERS | 9 ++
arch/arm64/Kconfig.platforms | 7 ++
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/ti/Makefile | 9 ++
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 31 +++++++
arch/arm64/boot/dts/ti/k3-am65.dtsi | 87 ++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 36 ++++++++
arch/arm64/boot/dts/ti/k3-am654.dtsi | 115 ++++++++++++++++++++++++
drivers/soc/ti/Kconfig | 14 +++
10 files changed, 332 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt
create mode 100644 arch/arm64/boot/dts/ti/Makefile
create mode 100644 arch/arm64/boot/dts/ti/k3-am65-main.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am65.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am654-base-board.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am654.dtsi
^ permalink raw reply [flat|nested] 5+ messages in thread* [GIT PULL] am654 changes for v4.19 merge window
2018-07-21 6:05 [GIT PULL] am654 changes for v4.19 merge window Tony Lindgren
@ 2018-07-21 22:07 ` Olof Johansson
2018-07-22 6:40 ` Tony Lindgren
0 siblings, 1 reply; 5+ messages in thread
From: Olof Johansson @ 2018-07-21 22:07 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jul 20, 2018 at 11:05:16PM -0700, Tony Lindgren wrote:
> From: "Tony Lindgren" <tony@atomide.com>
>
> The following changes since commit ce397d215ccd07b8ae3f71db689aedb85d56ab40:
>
> Linux 4.18-rc1 (2018-06-17 08:04:49 +0900)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/am654-for-v4.19-signed
>
> for you to fetch changes up to d0a064bec75e20a526c7bc0d626912f2660b6e81:
>
> arm64: dts: ti: Add support for AM654 EVM base board (2018-07-18 11:48:36 -0700)
>
> ----------------------------------------------------------------
> TI AM654 support for v4.19 merge window
>
> This branch adds initial support for new Texas Instruments AM654
> quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC
> architecture.
>
> Initially only basic devices are configured, support for more devices
> will follow later on. And many of the internal devices familiar from
> earlier TI SoCs should work with existing kernel device drivers.
I squinted a bit and merged this into next/dt. Might have been a bit cleaner to
split it in a SoC and a DT branch, but either way it's pretty small changes.
Should the support be enabled in arm64's defconfig?
-Olof
^ permalink raw reply [flat|nested] 5+ messages in thread
* [GIT PULL] am654 changes for v4.19 merge window
2018-07-21 22:07 ` Olof Johansson
@ 2018-07-22 6:40 ` Tony Lindgren
2018-07-23 13:06 ` Nishanth Menon
0 siblings, 1 reply; 5+ messages in thread
From: Tony Lindgren @ 2018-07-22 6:40 UTC (permalink / raw)
To: linux-arm-kernel
* Olof Johansson <olof@lixom.net> [180721 22:28]:
> On Fri, Jul 20, 2018 at 11:05:16PM -0700, Tony Lindgren wrote:
> > From: "Tony Lindgren" <tony@atomide.com>
> >
> > The following changes since commit ce397d215ccd07b8ae3f71db689aedb85d56ab40:
> >
> > Linux 4.18-rc1 (2018-06-17 08:04:49 +0900)
> >
> > are available in the Git repository at:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/am654-for-v4.19-signed
> >
> > for you to fetch changes up to d0a064bec75e20a526c7bc0d626912f2660b6e81:
> >
> > arm64: dts: ti: Add support for AM654 EVM base board (2018-07-18 11:48:36 -0700)
> >
> > ----------------------------------------------------------------
> > TI AM654 support for v4.19 merge window
> >
> > This branch adds initial support for new Texas Instruments AM654
> > quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC
> > architecture.
> >
> > Initially only basic devices are configured, support for more devices
> > will follow later on. And many of the internal devices familiar from
> > earlier TI SoCs should work with existing kernel device drivers.
>
> I squinted a bit and merged this into next/dt. Might have been a bit cleaner to
> split it in a SoC and a DT branch, but either way it's pretty small changes.
OK yeah I could have done a separate branch for Kconfig changes.
> Should the support be enabled in arm64's defconfig?
Yes it should, Nishanth, care to check Linux next once your
patches are merged and send a patch for that?
Regards,
Tony
^ permalink raw reply [flat|nested] 5+ messages in thread
* [GIT PULL] am654 changes for v4.19 merge window
2018-07-22 6:40 ` Tony Lindgren
@ 2018-07-23 13:06 ` Nishanth Menon
2018-07-23 16:18 ` Olof Johansson
0 siblings, 1 reply; 5+ messages in thread
From: Nishanth Menon @ 2018-07-23 13:06 UTC (permalink / raw)
To: linux-arm-kernel
On 06:40-20180722, Tony Lindgren wrote:
> * Olof Johansson <olof@lixom.net> [180721 22:28]:
> > On Fri, Jul 20, 2018 at 11:05:16PM -0700, Tony Lindgren wrote:
> > > From: "Tony Lindgren" <tony@atomide.com>
> > >
> > > The following changes since commit ce397d215ccd07b8ae3f71db689aedb85d56ab40:
> > >
> > > Linux 4.18-rc1 (2018-06-17 08:04:49 +0900)
> > >
> > > are available in the Git repository at:
> > >
> > > git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/am654-for-v4.19-signed
> > >
> > > for you to fetch changes up to d0a064bec75e20a526c7bc0d626912f2660b6e81:
> > >
> > > arm64: dts: ti: Add support for AM654 EVM base board (2018-07-18 11:48:36 -0700)
> > >
> > > ----------------------------------------------------------------
> > > TI AM654 support for v4.19 merge window
> > >
> > > This branch adds initial support for new Texas Instruments AM654
> > > quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC
> > > architecture.
> > >
> > > Initially only basic devices are configured, support for more devices
> > > will follow later on. And many of the internal devices familiar from
> > > earlier TI SoCs should work with existing kernel device drivers.
> >
> > I squinted a bit and merged this into next/dt. Might have been a bit cleaner to
> > split it in a SoC and a DT branch, but either way it's pretty small changes.
>
> OK yeah I could have done a separate branch for Kconfig changes.
Thanks a bunch.
>
> > Should the support be enabled in arm64's defconfig?
>
> Yes it should, Nishanth, care to check Linux next once your
> patches are merged and send a patch for that?
Just checked next-20180723 - Seems to work for me[1]. I was holding off
the defconfig update to get the driver changes for base to get in. I
will send a ping on those and if i dont see any response, will send a
defconfig update by tomorrow.
[1] https://pastebin.ubuntu.com/p/MQ9cFH6Xzd/
--
Regards,
Nishanth Menon
^ permalink raw reply [flat|nested] 5+ messages in thread
* [GIT PULL] am654 changes for v4.19 merge window
2018-07-23 13:06 ` Nishanth Menon
@ 2018-07-23 16:18 ` Olof Johansson
0 siblings, 0 replies; 5+ messages in thread
From: Olof Johansson @ 2018-07-23 16:18 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jul 23, 2018 at 6:06 AM, Nishanth Menon <nm@ti.com> wrote:
> On 06:40-20180722, Tony Lindgren wrote:
>> * Olof Johansson <olof@lixom.net> [180721 22:28]:
>> > On Fri, Jul 20, 2018 at 11:05:16PM -0700, Tony Lindgren wrote:
>> > > From: "Tony Lindgren" <tony@atomide.com>
>> > >
>> > > The following changes since commit ce397d215ccd07b8ae3f71db689aedb85d56ab40:
>> > >
>> > > Linux 4.18-rc1 (2018-06-17 08:04:49 +0900)
>> > >
>> > > are available in the Git repository at:
>> > >
>> > > git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/am654-for-v4.19-signed
>> > >
>> > > for you to fetch changes up to d0a064bec75e20a526c7bc0d626912f2660b6e81:
>> > >
>> > > arm64: dts: ti: Add support for AM654 EVM base board (2018-07-18 11:48:36 -0700)
>> > >
>> > > ----------------------------------------------------------------
>> > > TI AM654 support for v4.19 merge window
>> > >
>> > > This branch adds initial support for new Texas Instruments AM654
>> > > quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC
>> > > architecture.
>> > >
>> > > Initially only basic devices are configured, support for more devices
>> > > will follow later on. And many of the internal devices familiar from
>> > > earlier TI SoCs should work with existing kernel device drivers.
>> >
>> > I squinted a bit and merged this into next/dt. Might have been a bit cleaner to
>> > split it in a SoC and a DT branch, but either way it's pretty small changes.
>>
>> OK yeah I could have done a separate branch for Kconfig changes.
>
> Thanks a bunch.
>
>>
>> > Should the support be enabled in arm64's defconfig?
>>
>> Yes it should, Nishanth, care to check Linux next once your
>> patches are merged and send a patch for that?
>
> Just checked next-20180723 - Seems to work for me[1]. I was holding off
> the defconfig update to get the driver changes for base to get in. I
> will send a ping on those and if i dont see any response, will send a
> defconfig update by tomorrow.
Feel free to send a patch right after -rc1 to turn on new
options/drivers that have landed in the merge window. If it's just a
few lines we can apply and merge it at that time.
-Olof
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-07-23 16:18 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-07-21 6:05 [GIT PULL] am654 changes for v4.19 merge window Tony Lindgren
2018-07-21 22:07 ` Olof Johansson
2018-07-22 6:40 ` Tony Lindgren
2018-07-23 13:06 ` Nishanth Menon
2018-07-23 16:18 ` Olof Johansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).