From: paul.kocialkowski@bootlin.com (Paul Kocialkowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 3/8] dt-bindings: media: Document bindings for the Cedrus VPU driver
Date: Wed, 25 Jul 2018 12:02:51 +0200 [thread overview]
Message-ID: <20180725100256.22833-4-paul.kocialkowski@bootlin.com> (raw)
In-Reply-To: <20180725100256.22833-1-paul.kocialkowski@bootlin.com>
This adds a device-tree binding document that specifies the properties
used by the Cedurs VPU driver, as well as examples.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/media/cedrus.txt | 54 +++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/cedrus.txt
diff --git a/Documentation/devicetree/bindings/media/cedrus.txt b/Documentation/devicetree/bindings/media/cedrus.txt
new file mode 100644
index 000000000000..a089a0c1ff05
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cedrus.txt
@@ -0,0 +1,54 @@
+Device-tree bindings for the VPU found in Allwinner SoCs, referred to as the
+Video Engine (VE) in Allwinner literature.
+
+The VPU can only access the first 256 MiB of DRAM, that are DMA-mapped starting
+from the DRAM base. This requires specific memory allocation and handling.
+
+Required properties:
+- compatible : must be one of the following compatibles:
+ - "allwinner,sun4i-a10-video-engine"
+ - "allwinner,sun5i-a13-video-engine"
+ - "allwinner,sun7i-a20-video-engine"
+ - "allwinner,sun8i-a33-video-engine"
+ - "allwinner,sun8i-h3-video-engine"
+- reg : register base and length of VE;
+- clocks : list of clock specifiers, corresponding to entries in
+ the clock-names property;
+- clock-names : should contain "ahb", "mod" and "ram" entries;
+- resets : phandle for reset;
+- interrupts : VE interrupt number;
+- allwinner,sram : SRAM region to use with the VE.
+
+Optional properties:
+- memory-region : CMA pool to use for buffers allocation instead of the
+ default CMA pool.
+
+Example:
+
+reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+ cma_pool: cma at 4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+};
+
+video-codec at 1c0e000 {
+ compatible = "allwinner,sun7i-a20-video-engine";
+ reg = <0x01c0e000 0x1000>;
+
+ clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+
+ resets = <&ccu RST_VE>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+};
--
2.18.0
next prev parent reply other threads:[~2018-07-25 10:02 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-25 10:02 [PATCH v6 0/8] Cedrus driver for the Allwinner Video Engine, using media requests Paul Kocialkowski
2018-07-25 10:02 ` [PATCH v6 1/8] media: v4l: Add definitions for MPEG2 slice format and metadata Paul Kocialkowski
2018-08-04 11:35 ` Hans Verkuil
2018-08-08 11:57 ` Paul Kocialkowski
2018-08-04 13:30 ` Hans Verkuil
2018-08-08 12:05 ` Paul Kocialkowski
2018-07-25 10:02 ` [PATCH v6 2/8] media: v4l: Add definition for Allwinner's MB32-tiled NV12 format Paul Kocialkowski
2018-08-04 11:42 ` Hans Verkuil
2018-08-07 16:40 ` Paul Kocialkowski
2018-07-25 10:02 ` Paul Kocialkowski [this message]
2018-07-25 10:02 ` [PATCH v6 4/8] media: platform: Add Cedrus VPU decoder driver Paul Kocialkowski
2018-07-27 14:03 ` [linux-sunxi] " Jernej Škrabec
2018-07-27 14:58 ` Jernej Škrabec
2018-08-07 12:31 ` Paul Kocialkowski
2018-08-07 15:05 ` Jernej Škrabec
2018-08-07 15:10 ` Tomasz Figa
2018-08-07 12:16 ` Paul Kocialkowski
2018-07-29 7:58 ` Jernej Škrabec
2018-08-07 12:07 ` Paul Kocialkowski
2018-08-03 20:49 ` Ezequiel Garcia
2018-08-06 14:21 ` Paul Kocialkowski
2018-08-08 9:28 ` Paul Kocialkowski
2018-08-04 12:18 ` Hans Verkuil
2018-08-06 13:50 ` Paul Kocialkowski
2018-08-06 14:10 ` Tomasz Figa
2018-08-07 7:19 ` Paul Kocialkowski
2018-08-08 3:16 ` Tomasz Figa
2018-07-25 10:02 ` [PATCH v6 5/8] ARM: dts: sun5i: Add Video Engine and reserved memory nodes Paul Kocialkowski
2018-07-25 10:02 ` [PATCH v6 6/8] ARM: dts: sun7i-a20: " Paul Kocialkowski
2018-07-25 10:02 ` [PATCH v6 7/8] ARM: dts: sun8i-a33: " Paul Kocialkowski
2018-07-25 10:02 ` [PATCH v6 8/8] ARM: dts: sun8i-h3: " Paul Kocialkowski
2018-08-04 12:43 ` [PATCH v6 0/8] Cedrus driver for the Allwinner Video Engine, using media requests Hans Verkuil
2018-08-06 9:22 ` Paul Kocialkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180725100256.22833-4-paul.kocialkowski@bootlin.com \
--to=paul.kocialkowski@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).