From mboxrd@z Thu Jan 1 00:00:00 1970 From: andre.przywara@arm.com (Andre Przywara) Date: Thu, 26 Jul 2018 01:35:32 +0100 Subject: [PATCH v2 18/18] arm64: dts: allwinner: a64: NanoPi-A64: Add blue status LED In-Reply-To: <20180726003532.18751-1-andre.przywara@arm.com> References: <20180726003532.18751-1-andre.przywara@arm.com> Message-ID: <20180726003532.18751-19-andre.przywara@arm.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Beside the non-controllable green power LED, the NanoPi-A64 features a blue "status" LED, connected to PD24. Add the device tree node to make it usable. Signed-off-by: Andre Przywara --- arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index 705e0b23589e..d75d4d5cbf73 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -60,6 +60,15 @@ stdout-path = "serial0:115200n8"; }; + leds { + compatible = "gpio-leds"; + + blue { + label = "nanopi-a64:blue:status"; + gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + }; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ -- 2.14.4