From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Tue, 31 Jul 2018 14:34:52 +0200 Subject: [PATCH v6 0/4] IR support for A83T In-Reply-To: <20180731092258.2279-1-embed3d@gmail.com> References: <20180731092258.2279-1-embed3d@gmail.com> Message-ID: <20180731123452.74jyxc4q3ewig35z@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Jul 31, 2018 at 11:22:54AM +0200, Philipp Rossak wrote: > This patch series adds support for the sunxi A83T ir module and enhances > the sunxi-ir driver. Right now the base clock frequency for the ir driver > is a hard coded define and is set to 8 MHz. > This works for the most common ir receivers. On the Sinovoip Bananapi M3 > the ir receiver needs, a 3 MHz base clock frequency to work without > problems with this driver. > > This patch series adds support for an optinal property that makes it able > to override the default base clock frequency and enables the ir interface > on the a83t and the Bananapi M3. Once the minor comment on patch 2 has been fixed, Acked-by: Maxime Ripard Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com