From mboxrd@z Thu Jan 1 00:00:00 1970 From: mka@chromium.org (Matthias Kaehlcke) Date: Tue, 31 Jul 2018 11:45:53 -0700 Subject: [PATCH v6 2/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Improve thermal zone in example In-Reply-To: <20180731184556.169290-1-mka@chromium.org> References: <20180731184556.169290-1-mka@chromium.org> Message-ID: <20180731184556.169290-2-mka@chromium.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The current example for a thermal zone isn't very useful as reference since it would result in a hardware shutdown at 145?C, instead of allowing the system to try to shutdown gracefully. Without an ADC channel a maximum of two trip points is useful in practice for this sensor, with temperatures corresponding to the stage 1 and stage 2 'hardware trip points'. A critical trip point at stage 2 may allow the system to shutdown before a hardware shutdown at stage 3 kicks in. It should be noted though that by default the chip performs a 'partial shutdown' when the temperature reaches stage 2, which may prevent an orderly shutdown. The 'partial shutdown' can be disabled by software. Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson --- Changes in v6: - patch added to the series --- .../bindings/thermal/qcom-spmi-temp-alarm.txt | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt index 86fb41fe772f..0273a92a2a84 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt @@ -35,19 +35,14 @@ Example: thermal-sensors = <&pm8941_temp>; trips { - passive { - temperature = <1050000>; + stage1 { + temperature = <105000>; hysteresis = <2000>; type = "passive"; }; - alert { + stage2 { temperature = <125000>; hysteresis = <2000>; - type = "hot"; - }; - crit { - temperature = <145000>; - hysteresis = <2000>; type = "critical"; }; }; -- 2.18.0.345.g5c9ce644c3-goog