From mboxrd@z Thu Jan 1 00:00:00 1970 From: mka@chromium.org (Matthias Kaehlcke) Date: Tue, 31 Jul 2018 11:45:56 -0700 Subject: [PATCH v6 5/5] arm64: dts: qcom: pm8998: Add pm8998 thermal zone In-Reply-To: <20180731184556.169290-1-mka@chromium.org> References: <20180731184556.169290-1-mka@chromium.org> Message-ID: <20180731184556.169290-5-mka@chromium.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The thermal zone uses spmi-temp-alarm as sensor, the trip points correspond to the PMIC thermal stages 1 and 2. The critical trip point at 125?C disables the partial PMIC shutdown at stage 2. Without an IIO input the sensor only reports a limited number of temperatures: - 37?C for temperatures below 105?C - 107?C for temperatures >= 105?C and < 125?C - 127?C for temperatures >= 125?C (the numbers correspond to a stage 1 threshold of 105?C) Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson --- Changes in v6: - added 'Reviewed-by: Douglas Anderson ' tag Changes in v5: - removed 'stage2-shutdown-disabled' property from spmi-temp-alarm - updated commit message Changes in v4: - updated trip point temperatures to match stage 1 and 2 ones - disabled stage 2 shutdown - updated commit message Changes in v3: - moved 'thermal-zones' node to the beginning of the .dtsi Changes in v2: - defined 'thermal-zones' node in pm8998.dtsi instead of using a label to refer to it - use 105?C hardware trip point as critical trip point - reduced number of trip points to 2 - lowered temperature of passive trip point - updated trip point names and added labels - updated commit message --- arch/arm64/boot/dts/qcom/pm8998.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 7eea94701b23..34c259ba3919 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -3,6 +3,31 @@ #include #include +#include + +/ { + thermal-zones { + pm8998 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm8998_temp>; + + trips { + pm8998_alert0: pm8998-alert0 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + pm8998_crit: pm8998-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; &spmi_bus { pm8998_lsid0: pmic at 0 { -- 2.18.0.345.g5c9ce644c3-goog