From mboxrd@z Thu Jan 1 00:00:00 1970 From: pavel@ucw.cz (Pavel Machek) Date: Wed, 1 Aug 2018 22:28:21 +0200 Subject: [PATCH] fix vibrations on Droid 4 In-Reply-To: <20180716075926.GU99251@atomide.com> References: <20180709081534.GA6799@amd> <20180709214910.tes6u4ivxomd3aja@earth.universe> <20180709220211.GA7760@amd> <20180710101147.lyu65ro4czvrs2da@earth.universe> <20180710133040.GA4391@amd> <20180710161123.azym6sbboriuj4yc@earth.universe> <20180711080218.GA21225@amd> <20180711132739.GL99251@atomide.com> <20180715201729.GB19675@amd> <20180716075926.GU99251@atomide.com> Message-ID: <20180801202821.GB4033@amd> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Vibration GPIOs don't have anything to do with wakeup. Move it to normal section; this fixes vibrations on Droid 4. Signed-off-by: Pavel Machek diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index c27fc87..7b82179 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -646,15 +646,6 @@ OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ >; }; -}; - -&omap4_pmx_wkup { - usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { - /* gpio_wk0 */ - pinctrl-single,pins = < - OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) - >; - }; vibrator_direction_pin: pinmux_vibrator_direction_pin { pinctrl-single,pins = < @@ -669,6 +660,15 @@ }; }; +&omap4_pmx_wkup { + usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { + /* gpio_wk0 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + /* * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for * uart1 wakeirq. -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: Digital signature URL: