linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jcrouse@codeaurora.org (Jordan Crouse)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] arm64: dts: sdm845: Add gpu and gmu device nodes
Date: Wed,  8 Aug 2018 16:47:01 -0600	[thread overview]
Message-ID: <20180808224701.7527-3-jcrouse@codeaurora.org> (raw)
In-Reply-To: <20180808224701.7527-1-jcrouse@codeaurora.org>

Add the nodes to describe the Adreno GPU and GMU devices.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 121 +++++++++++++++++++++++++++
 1 file changed, 121 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cdaabeb3c995..9fb90bb4ea1f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -323,5 +323,126 @@
 				status = "disabled";
 			};
 		};
+
+		adreno_smmu: arm,smmu-adreno at 5040000 {
+			compatible = "qcom,msm8996-smmu-v2";
+			reg = <0x5040000 0x10000>;
+			#iommu-cells = <1>;
+		#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clock_gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				<&clock_gcc GCC_GPU_CFG_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&clock_gpucc GPU_CX_GDSC>;
+		};
+
+		gpu_opp_table: adreno-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-710000000 {
+				opp-hz = /bits/ 64 <710000000>;
+				qcom,level = <416>;
+			};
+
+			opp-675000000 {
+				opp-hz = /bits/ 64 <675000000>;
+				qcom,level = <384>;
+			};
+
+			opp-596000000 {
+				opp-hz = /bits/ 64 <596000000>;
+				qcom,level = <320>;
+			};
+
+			opp-520000000 {
+				opp-hz = /bits/ 64 <520000000>;
+				qcom,level = <256>;
+			};
+
+			opp-414000000 {
+				opp-hz = /bits/ 64 <414000000>;
+				qcom,level = <192>;
+			};
+
+			opp-342000000 {
+				opp-hz = /bits/ 64 <342000000>;
+				qcom,level = <128>;
+			};
+
+			opp-257000000 {
+				opp-hz = /bits/ 64 <257000000>;
+				qcom,level = <64>;
+			};
+		};
+
+		gpu at 5000000 {
+			compatible = "qcom,adreno-630.2", "qcom,adreno";
+			#stream-id-cells = <16>;
+
+			reg = <0x5000000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			/*
+			 * Look ma, no clocks! The GPU clocks and power are
+			 * controlled entirely by the GMU
+			 */
+
+			interrupts = <0 300 0>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			iommus = <&adreno_smmu 0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+		};
+
+		gmu_opp_table: adreno-gmu-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				qcom,level = <128>;
+			};
+
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+				qcom,level = <48>;
+			};
+		};
+
+		gmu: gmu at 506a000 {
+			compatible="qcom,adreno-gmu";
+
+			reg = <0x506a000 0x30000>,
+				<0xb280000 0x10000>,
+				<0xb480000 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&clock_gpucc GPU_CC_CX_GMU_CLK>,
+				<&clock_gpucc GPU_CC_CXO_CLK>,
+				<&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				<&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&clock_gpucc GPU_CX_GDSC>;
+			iommus = <&adreno_smmu 5>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+		};
 	};
 };
-- 
2.18.0

  parent reply	other threads:[~2018-08-08 22:47 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-08 22:46 [v3 PATCH 0/2] arm64: dts: Add sdm845 GPU/GMU and SMMU Jordan Crouse
2018-08-08 22:47 ` [PATCH 1/2] dt-bindings: Document qcom,adreno-gmu Jordan Crouse
2018-08-08 22:47 ` Jordan Crouse [this message]
2018-08-09  9:46   ` [PATCH 2/2] arm64: dts: sdm845: Add gpu and gmu device nodes Robin Murphy
2018-08-10 19:49   ` Stephen Boyd
2018-08-12  1:23   ` kbuild test robot
  -- strict thread matches above, loose matches on Subject: below --
2018-03-16 18:51 [v2 PATCH 0/2] arm64: dts: Add sdm845 GPU/GMU and SMMU Jordan Crouse
2018-03-16 18:51 ` [PATCH 2/2] arm64: dts: sdm845: Add gpu and gmu device nodes Jordan Crouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180808224701.7527-3-jcrouse@codeaurora.org \
    --to=jcrouse@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).