[PATCH v10 0/4] add mailbox support for i.MX7D

[PATCH v10 0/4] add mailbox support for i.MX7D

[Oleksij Rempel]

20180803 changes v10:
- imx-mailbox: apply Vladimir's review

20180802 changes v9:
- DT: remove notes about shmem
- imx-mailbox: reword changelog 
- imx-mailbox: use tasklet instead of workqueue
- imx-mailbox: remove imx_mu_last_tx_done
- imx-mailbox: move irq_desc to probe
- imx-mailbox: change (const == var) to (var == const)

20180731 changes v8:
- imx-mailbox & DT: rework driver from 4 channel bidirectional mode to
  16 channel unidirectional mode. 8 extra channels are implemented on
  top of General Purpose Interrupt bits provided by this MU.

20180726 changes v7:
- DT: add i.MX6SX and i.MX7S to the documentation.
- imx-mailbox: don't use devm_ functions for startup and shutdown.
- imx-mailbox: rename imx_mu_rmw to imx_mu_xcr_rmw and add locks
- imx-mailbox: pass of_property_read_bool directly to side_b

20180722 changes v6:
- include one more patch provided by Aisheng
- DT: add fall back compatible fsl,imx6sx-mu
- imx-mailbox: for now, use only fsl,imx6sx-mu

20180721 changes v5:
- DT: revert most of the changes from previous version
- imx-mailbox: remove struct imx_mu_cfg
- imx-mailbox: remove !! from imx_mu_last_tx_done()

20180718 changes v4:
- DT: change fsl,mu-side-a to fsl,mu-side-b
- DT: split the patches.
- DT: add all currently known SoCs.
- imx-mailbox: free allocated irq name on channel shutdown
- imx-mailbox: rename *_imx7 functions to *_generic

20180715 changes v3:
- DT: remove prosaic part of documentation. It describes software
  or firmware specific usage and not relevant for HW description.
- DT: use <soc>-mu instead of <soc>-mu-<mu side> and add fsl,mu-side-a
  parameter.
- DT: add most of know i.MX variants with MU
- imx-mailbox: use macros instead of precalculated bit index.
- imx-mailbox: remove warning message for clk.
- imx-mailbox: use imx_mu_chan[%idx] for devm_request_irq.
- imx-mailbox: depend on ARCH_MXC instead of SOX_IMX7

20180615 changes v2:
- DT: use mailbox@ instead of mu@
- DT: change interrupts description
- clk: use imx_clk_gate4 instead of imx_clk_gate2
- imx-mailbox: remove last_tx_done support
- imx-mailbox: fix module description 

This patches are providing support for mailbox (Messaging Unit)
for i.MX7D.
Functionality was tested on PHYTEC phyBOARD-Zeta i.MX7D with
Linux running on all cores: ARM Cortex-A7 and ARM Cortex-M4.

Both parts of i.MX messaging Unit are visible for all CPUs available
on i.MX7D. Communication worked independent of MU side in combination
with CPU. For example MU-A used on ARM Cortex-A7 and MU-B used on ARM Cortex-M4
or other ways around.

Dong Aisheng (1):
  dt-bindings: arm: fsl: add mu binding doc

Oleksij Rempel (3):
  dt-bindings: mailbox: imx-mu: add generic MU channel support
  ARM: dts: imx7s: add i.MX7 messaging unit support
  mailbox: Add support for i.MX messaging unit

 .../devicetree/bindings/mailbox/fsl,mu.txt    |  54 +++
 arch/arm/boot/dts/imx7s.dtsi                  |  19 +
 drivers/mailbox/Kconfig                       |   6 +
 drivers/mailbox/Makefile                      |   2 +
 drivers/mailbox/imx-mailbox.c                 | 358 ++++++++++++++++++
 5 files changed, 439 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/fsl,mu.txt
 create mode 100644 drivers/mailbox/imx-mailbox.c

-- 
2.18.0

[PATCH v10 1/4] dt-bindings: arm: fsl: add mu binding doc

[Oleksij Rempel]

From: Dong Aisheng <aisheng.dong@nxp.com>

The Messaging Unit module enables two processors within
the SoC to communicate and coordinate by passing messages
(e.g. data, status and control) through the MU interface.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree at vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
 .../devicetree/bindings/mailbox/fsl,mu.txt    | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/fsl,mu.txt

diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
new file mode 100644
index 000000000000..90e4905dfc69
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
@@ -0,0 +1,34 @@
+NXP i.MX Messaging Unit (MU)
+--------------------------------------------------------------------
+
+The Messaging Unit module enables two processors within the SoC to
+communicate and coordinate by passing messages (e.g. data, status
+and control) through the MU interface. The MU also provides the ability
+for one processor to signal the other processor using interrupts.
+
+Because the MU manages the messaging between processors, the MU uses
+different clocks (from each side of the different peripheral buses).
+Therefore, the MU must synchronize the accesses from one side to the
+other. The MU accomplishes synchronization using two sets of matching
+registers (Processor A-facing, Processor B-facing).
+
+Messaging Unit Device Node:
+=============================
+
+Required properties:
+-------------------
+- compatible :	should be "fsl,<chip>-mu", the supported chips include
+		imx8qxp, imx8qm.
+- reg :		Should contain the registers location and length
+- interrupts :	Interrupt number. The interrupt specifier format depends
+		on the interrupt controller parent.
+- #mbox-cells:  Must be 0. Number of cells in a mailbox
+
+Examples:
+--------
+lsio_mu0: mailbox at 5d1b0000 {
+	compatible = "fsl,imx8qxp-mu";
+	reg = <0x0 0x5d1b0000 0x0 0x10000>;
+	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+	#mbox-cells = <0>;
+};
-- 
2.18.0

[PATCH v10 2/4] dt-bindings: mailbox: imx-mu: add generic MU channel support

[Oleksij Rempel]

Each MU has four pairs of rx/tx data register with four rx/tx interrupts
which can also be used as a separate channel.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 .../devicetree/bindings/mailbox/fsl,mu.txt    | 26 ++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
index 90e4905dfc69..f3cf77eb5ab4 100644
--- a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
@@ -18,11 +18,31 @@ Messaging Unit Device Node:
 Required properties:
 -------------------
 - compatible :	should be "fsl,<chip>-mu", the supported chips include
-		imx8qxp, imx8qm.
+		imx6sx, imx7s, imx8qxp, imx8qm.
+		The "fsl,imx6sx-mu" compatible is seen as generic and should
+		be included together with SoC specific compatible.
 - reg :		Should contain the registers location and length
 - interrupts :	Interrupt number. The interrupt specifier format depends
 		on the interrupt controller parent.
-- #mbox-cells:  Must be 0. Number of cells in a mailbox
+- #mbox-cells:  Must be 2.
+			  <&phandle type channel>
+			    phandle   : Label name of controller
+			    type      : Channel type
+			    channel   : Channel number
+
+		This MU support 4 type of unidirectional channels, each type
+		has 4 channels. A total of 16 channels. Following types are
+		supported:
+		0 - TX channel with 32bit transmit register and IRQ transmit
+		acknowledgment support.
+		1 - RX channel with 32bit receive register and IRQ support
+		2 - TX doorbell channel. Without own register and no ACK support.
+		3 - RX doorbell channel.
+
+Optional properties:
+-------------------
+- clocks :	phandle to the input clock.
+- fsl,mu-side-b : Should be set for side B MU.
 
 Examples:
 --------
@@ -30,5 +50,5 @@ lsio_mu0: mailbox at 5d1b0000 {
 	compatible = "fsl,imx8qxp-mu";
 	reg = <0x0 0x5d1b0000 0x0 0x10000>;
 	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-	#mbox-cells = <0>;
+	#mbox-cells = <2>;
 };
-- 
2.18.0

[PATCH v10 3/4] ARM: dts: imx7s: add i.MX7 messaging unit support

[Oleksij Rempel]

Define the Messaging Unit (MU) for i.MX7 in the processor's dtsi.
The respective driver is added in the next commit.

Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx7s.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index ce85b3ca1a55..3581fc2cc01d 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -1001,6 +1001,25 @@
 				status = "disabled";
 			};
 
+			mu0a: mailbox at 30aa0000 {
+				compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_MU_ROOT_CLK>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu0b: mailbox at 30ab0000 {
+				compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+				reg = <0x30ab0000 0x10000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_MU_ROOT_CLK>;
+				#mbox-cells = <2>;
+				fsl,mu-side-b;
+				status = "disabled";
+			};
+
 			usbotg1: usb at 30b10000 {
 				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x30b10000 0x200>;
-- 
2.18.0

[PATCH v10 3/4] ARM: dts: imx7s: add i.MX7 messaging unit support

[Shawn Guo]

On Fri, Aug 03, 2018 at 07:29:18AM +0200, Oleksij Rempel wrote:
> Define the Messaging Unit (MU) for i.MX7 in the processor's dtsi.
> The respective driver is added in the next commit.
> 
> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Applied, thanks.

[PATCH v10 4/4] mailbox: Add support for i.MX messaging unit

[Oleksij Rempel]

The i.MX Messaging Unit is a two side block which allows applications
implement communication over this sides.

The MU includes the following features:
- Messaging control by interrupts or by polling
- Four general-purpose interrupt requests reflected to the other side
- Three general-purpose flags reflected to the other side
- Four receive registers with maskable interrupt
- Four transmit registers with maskable interrupt

Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/mailbox/Kconfig       |   6 +
 drivers/mailbox/Makefile      |   2 +
 drivers/mailbox/imx-mailbox.c | 358 ++++++++++++++++++++++++++++++++++
 3 files changed, 366 insertions(+)
 create mode 100644 drivers/mailbox/imx-mailbox.c

diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index a2bb27446dce..79060ddc380d 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -15,6 +15,12 @@ config ARM_MHU
 	  The controller has 3 mailbox channels, the last of which can be
 	  used in Secure mode only.
 
+config IMX_MBOX
+	tristate "i.MX Mailbox"
+	depends on ARCH_MXC || COMPILE_TEST
+	help
+	  Mailbox implementation for i.MX Messaging Unit (MU).
+
 config PLATFORM_MHU
 	tristate "Platform MHU Mailbox"
 	depends on OF
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index cc23c3a43fcd..ba2fe1b6dd62 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -7,6 +7,8 @@ obj-$(CONFIG_MAILBOX_TEST)	+= mailbox-test.o
 
 obj-$(CONFIG_ARM_MHU)	+= arm_mhu.o
 
+obj-$(CONFIG_IMX_MBOX)	+= imx-mailbox.o
+
 obj-$(CONFIG_PLATFORM_MHU)	+= platform_mhu.o
 
 obj-$(CONFIG_PL320_MBOX)	+= pl320-ipc.o
diff --git a/drivers/mailbox/imx-mailbox.c b/drivers/mailbox/imx-mailbox.c
new file mode 100644
index 000000000000..363d35d5e49d
--- /dev/null
+++ b/drivers/mailbox/imx-mailbox.c
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Pengutronix, Oleksij Rempel <o.rempel@pengutronix.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+
+/* Transmit Register */
+#define IMX_MU_xTRn(x)		(0x00 + 4 * (x))
+/* Receive Register */
+#define IMX_MU_xRRn(x)		(0x10 + 4 * (x))
+/* Status Register */
+#define IMX_MU_xSR		0x20
+#define IMX_MU_xSR_GIPn(x)	BIT(28 + (3 - (x)))
+#define IMX_MU_xSR_RFn(x)	BIT(24 + (3 - (x)))
+#define IMX_MU_xSR_TEn(x)	BIT(20 + (3 - (x)))
+#define IMX_MU_xSR_BRDIP	BIT(9)
+
+/* Control Register */
+#define IMX_MU_xCR		0x24
+/* General Purpose Interrupt Enable */
+#define IMX_MU_xCR_GIEn(x)	BIT(28 + (3 - (x)))
+/* Receive Interrupt Enable */
+#define IMX_MU_xCR_RIEn(x)	BIT(24 + (3 - (x)))
+/* Transmit Interrupt Enable */
+#define IMX_MU_xCR_TIEn(x)	BIT(20 + (3 - (x)))
+/* General Purpose Interrupt Request */
+#define IMX_MU_xCR_GIRn(x)	BIT(16 + (3 - (x)))
+
+#define IMX_MU_CHANS		16
+#define IMX_MU_CHAN_NAME_SIZE	20
+
+enum imx_mu_chan_type {
+	IMX_MU_TYPE_TX,		/* Tx */
+	IMX_MU_TYPE_RX,		/* Rx */
+	IMX_MU_TYPE_TXDB,	/* Tx doorbell */
+	IMX_MU_TYPE_RXDB,	/* Rx doorbell */
+};
+
+struct imx_mu_con_priv {
+	unsigned int		idx;
+	char			irq_desc[IMX_MU_CHAN_NAME_SIZE];
+	enum imx_mu_chan_type	type;
+	struct mbox_chan	*chan;
+	struct tasklet_struct	txdb_tasklet;
+};
+
+struct imx_mu_priv {
+	struct device		*dev;
+	void __iomem		*base;
+	spinlock_t		xcr_lock; /* control register lock */
+
+	struct mbox_controller	mbox;
+	struct mbox_chan	mbox_chans[IMX_MU_CHANS];
+
+	struct imx_mu_con_priv  con_priv[IMX_MU_CHANS];
+	struct clk		*clk;
+	int			irq;
+
+	bool			side_b;
+};
+
+static struct imx_mu_priv *to_imx_mu_priv(struct mbox_controller *mbox)
+{
+	return container_of(mbox, struct imx_mu_priv, mbox);
+}
+
+static void imx_mu_write(struct imx_mu_priv *priv, u32 val, u32 offs)
+{
+	iowrite32(val, priv->base + offs);
+}
+
+static u32 imx_mu_read(struct imx_mu_priv *priv, u32 offs)
+{
+	return ioread32(priv->base + offs);
+}
+
+static u32 imx_mu_xcr_rmw(struct imx_mu_priv *priv, u32 set, u32 clr)
+{
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&priv->xcr_lock, flags);
+	val = imx_mu_read(priv, IMX_MU_xCR);
+	val &= ~clr;
+	val |= set;
+	imx_mu_write(priv, val, IMX_MU_xCR);
+	spin_unlock_irqrestore(&priv->xcr_lock, flags);
+
+	return val;
+}
+
+static void imx_mu_txdb_tasklet(unsigned long data)
+{
+	struct imx_mu_con_priv *cp = (struct imx_mu_con_priv *)data;
+
+	mbox_chan_txdone(cp->chan, 0);
+}
+
+static irqreturn_t imx_mu_isr(int irq, void *p)
+{
+	struct mbox_chan *chan = p;
+	struct imx_mu_priv *priv = to_imx_mu_priv(chan->mbox);
+	struct imx_mu_con_priv *cp = chan->con_priv;
+	u32 val, ctrl, dat;
+
+	ctrl = imx_mu_read(priv, IMX_MU_xCR);
+	val = imx_mu_read(priv, IMX_MU_xSR);
+
+	switch (cp->type) {
+	case IMX_MU_TYPE_TX:
+		val &= IMX_MU_xSR_TEn(cp->idx) &
+			(ctrl & IMX_MU_xCR_TIEn(cp->idx));
+		break;
+	case IMX_MU_TYPE_RX:
+		val &= IMX_MU_xSR_RFn(cp->idx) &
+			(ctrl & IMX_MU_xCR_RIEn(cp->idx));
+		break;
+	case IMX_MU_TYPE_RXDB:
+		val &= IMX_MU_xSR_GIPn(cp->idx) &
+			(ctrl & IMX_MU_xCR_GIEn(cp->idx));
+		break;
+	default:
+		break;
+	}
+
+	if (!val)
+		return IRQ_NONE;
+
+	if (val == IMX_MU_xSR_TEn(cp->idx)) {
+		imx_mu_xcr_rmw(priv, 0, IMX_MU_xCR_TIEn(cp->idx));
+		mbox_chan_txdone(chan, 0);
+	} else if (val == IMX_MU_xSR_RFn(cp->idx)) {
+		dat = imx_mu_read(priv, IMX_MU_xRRn(cp->idx));
+		mbox_chan_received_data(chan, (void *)&dat);
+	} else if (val == IMX_MU_xSR_GIPn(cp->idx)) {
+		imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx), IMX_MU_xSR);
+		mbox_chan_received_data(chan, NULL);
+	} else {
+		dev_warn_ratelimited(priv->dev, "Not handled interrupt\n");
+		return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int imx_mu_send_data(struct mbox_chan *chan, void *data)
+{
+	struct imx_mu_priv *priv = to_imx_mu_priv(chan->mbox);
+	struct imx_mu_con_priv *cp = chan->con_priv;
+	u32 *arg = data;
+
+	switch (cp->type) {
+	case IMX_MU_TYPE_TX:
+		imx_mu_write(priv, *arg, IMX_MU_xTRn(cp->idx));
+		imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
+		break;
+	case IMX_MU_TYPE_TXDB:
+		imx_mu_xcr_rmw(priv, IMX_MU_xCR_GIRn(cp->idx), 0);
+		tasklet_schedule(&cp->txdb_tasklet);
+		break;
+	default:
+		dev_warn_ratelimited(priv->dev, "Send data on wrong channel type: %d\n", cp->type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int imx_mu_startup(struct mbox_chan *chan)
+{
+	struct imx_mu_priv *priv = to_imx_mu_priv(chan->mbox);
+	struct imx_mu_con_priv *cp = chan->con_priv;
+	int ret;
+
+	if (cp->type == IMX_MU_TYPE_TXDB) {
+		/* Tx doorbell don't have ACK support */
+		tasklet_init(&cp->txdb_tasklet, imx_mu_txdb_tasklet,
+			     (unsigned long)cp);
+		return 0;
+	}
+
+	ret = request_irq(priv->irq, imx_mu_isr, IRQF_SHARED, cp->irq_desc,
+			  chan);
+	if (ret) {
+		dev_err(priv->dev,
+			"Unable to acquire IRQ %d\n", priv->irq);
+		return ret;
+	}
+
+	switch (cp->type) {
+	case IMX_MU_TYPE_RX:
+		imx_mu_xcr_rmw(priv, IMX_MU_xCR_RIEn(cp->idx), 0);
+		break;
+	case IMX_MU_TYPE_RXDB:
+		imx_mu_xcr_rmw(priv, IMX_MU_xCR_GIEn(cp->idx), 0);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static void imx_mu_shutdown(struct mbox_chan *chan)
+{
+	struct imx_mu_priv *priv = to_imx_mu_priv(chan->mbox);
+	struct imx_mu_con_priv *cp = chan->con_priv;
+
+	if (cp->type == IMX_MU_TYPE_TXDB)
+		tasklet_kill(&cp->txdb_tasklet);
+
+	imx_mu_xcr_rmw(priv, 0,
+		   IMX_MU_xCR_TIEn(cp->idx) | IMX_MU_xCR_RIEn(cp->idx));
+
+	free_irq(priv->irq, chan);
+}
+
+static const struct mbox_chan_ops imx_mu_ops = {
+	.send_data = imx_mu_send_data,
+	.startup = imx_mu_startup,
+	.shutdown = imx_mu_shutdown,
+};
+
+static struct mbox_chan * imx_mu_xlate(struct mbox_controller *mbox,
+				       const struct of_phandle_args *sp)
+{
+	u32 type, idx, chan;
+
+	if (sp->args_count != 2) {
+		dev_err(mbox->dev, "Invalid argument count %d\n", sp->args_count);
+		return ERR_PTR(-EINVAL);
+	}
+
+	type = sp->args[0]; /* channel type */
+	idx = sp->args[1]; /* index */
+	chan = type * 4 + idx;
+
+	if (chan >= mbox->num_chans) {
+		dev_err(mbox->dev, "Not supported channel number: %d. (type: %d, idx: %d)\n", chan, type, idx);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return &mbox->chans[chan];
+}
+
+static void imx_mu_init_generic(struct imx_mu_priv *priv)
+{
+	if (priv->side_b)
+		return;
+
+	/* Set default MU configuration */
+	imx_mu_write(priv, 0, IMX_MU_xCR);
+}
+
+static int imx_mu_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct resource *iomem;
+	struct imx_mu_priv *priv;
+	unsigned int i;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, iomem);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0)
+		return priv->irq;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		if (PTR_ERR(priv->clk) != -ENOENT)
+			return PTR_ERR(priv->clk);
+
+		priv->clk = NULL;
+	}
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(dev, "Failed to enable clock\n");
+		return ret;
+	}
+
+	for (i = 0; i < IMX_MU_CHANS; i++) {
+		struct imx_mu_con_priv *cp = &priv->con_priv[i];
+
+		cp->idx = i % 4;
+		cp->type = i >> 2;
+		cp->chan = &priv->mbox_chans[i];
+		priv->mbox_chans[i].con_priv = cp;
+		snprintf(cp->irq_desc, sizeof(cp->irq_desc),
+			 "imx_mu_chan[%i-%i]", cp->type, cp->idx);
+	}
+
+	priv->side_b = of_property_read_bool(np, "fsl,mu-side-b");
+
+	spin_lock_init(&priv->xcr_lock);
+
+	priv->mbox.dev = dev;
+	priv->mbox.ops = &imx_mu_ops;
+	priv->mbox.chans = priv->mbox_chans;
+	priv->mbox.num_chans = IMX_MU_CHANS;
+	priv->mbox.of_xlate = imx_mu_xlate;
+	priv->mbox.txdone_irq = true;
+
+	platform_set_drvdata(pdev, priv);
+
+	imx_mu_init_generic(priv);
+
+	return mbox_controller_register(&priv->mbox);
+}
+
+static int imx_mu_remove(struct platform_device *pdev)
+{
+	struct imx_mu_priv *priv = platform_get_drvdata(pdev);
+
+	mbox_controller_unregister(&priv->mbox);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static const struct of_device_id imx_mu_dt_ids[] = {
+	{ .compatible = "fsl,imx6sx-mu" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx_mu_dt_ids);
+
+static struct platform_driver imx_mu_driver = {
+	.probe		= imx_mu_probe,
+	.remove		= imx_mu_remove,
+	.driver = {
+		.name	= "imx_mu",
+		.of_match_table = imx_mu_dt_ids,
+	},
+};
+module_platform_driver(imx_mu_driver);
+
+MODULE_AUTHOR("Oleksij Rempel <o.rempel@pengutronix.de>");
+MODULE_DESCRIPTION("Message Unit driver for i.MX");
+MODULE_LICENSE("GPL v2");
-- 
2.18.0