From mboxrd@z Thu Jan  1 00:00:00 1970
From: shawnguo@kernel.org (Shawn Guo)
Date: Mon, 27 Aug 2018 14:59:29 +0800
Subject: [PATCH 2/3] ARM: dts: imx6ull: add pxp support
In-Reply-To: <20180810151822.18650-3-p.zabel@pengutronix.de>
References: <20180810151822.18650-1-p.zabel@pengutronix.de>
 <20180810151822.18650-3-p.zabel@pengutronix.de>
Message-ID: <20180827065927.GE3850@dragon>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Fri, Aug 10, 2018 at 05:18:21PM +0200, Philipp Zabel wrote:
> Add the device node for the i.MX6ULL Pixel Pipeline (PXP).
> 
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
>  arch/arm/boot/dts/imx6ul.dtsi  | 8 ++++++++
>  arch/arm/boot/dts/imx6ull.dtsi | 6 ++++++
>  2 files changed, 14 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
> index 47a3453a4211..e80a660c14f2 100644
> --- a/arch/arm/boot/dts/imx6ul.dtsi
> +++ b/arch/arm/boot/dts/imx6ul.dtsi
> @@ -928,6 +928,14 @@
>  				};
>  			};
>  
> +			pxp: pxp at 21cc000 {
> +				compatible = "fsl,imx6ul-pxp";
> +				reg = <0x021cc000 0x4000>;
> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "axi";
> +				clocks = <&clks IMX6UL_CLK_PXP>;
> +			};
> +
>  			lcdif: lcdif at 21c8000 {

In order of unit-address, pxp at 21cc000 should go after lcdif at 21c8000.

Shawn

>  				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
>  				reg = <0x021c8000 0x4000>;
> diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
> index ebc25c98e5e1..91d2b6dd9b1b 100644
> --- a/arch/arm/boot/dts/imx6ull.dtsi
> +++ b/arch/arm/boot/dts/imx6ull.dtsi
> @@ -75,3 +75,9 @@
>  		};
>  	};
>  };
> +
> +&pxp {
> +	compatible = "fsl,imx6ull-pxp";
> +	interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +		     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> +};
> -- 
> 2.18.0
>