From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] drm/sun4i: Remove R40 display pipeline compatibles
Date: Mon, 27 Aug 2018 16:39:50 +0800 [thread overview]
Message-ID: <20180827083950.602-1-wens@csie.org> (raw)
Two patches from the R40 display pipeline support series weren't applied
with the rest of the series. When they did get applied, the -rc6
deadline for drm-misc-next had past, so they didn't get into 4.19-rc1
with the rest of the series. However, the two patches are crucial in
the parsing of the R40's display pipeline graph in the device tree.
Without them, the driver crashes because it can't follow the odd graph
structure.
This patch removes the R40 compatibles from the sun4i-drm driver,
effectively disabling DRM support for the R40 for one release cycle.
This will prevent the driver from crashing upon probing.
The compatibles should be reinstated for the next release.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
This is for 4.19-rc to fix the boot crash seen on the R40.
This should go in drm-misc-fixes and into Linus' tree ASAP.
Once merged, the branch should also be merged into drm-misc-next,
and then we can revert it.
Thanks
---
drivers/gpu/drm/sun4i/sun4i_drv.c | 1 -
drivers/gpu/drm/sun4i/sun8i_mixer.c | 24 ------------------------
drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 1 -
3 files changed, 26 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c
index dd19d674055c..8b0cd08034e0 100644
--- a/drivers/gpu/drm/sun4i/sun4i_drv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
@@ -418,7 +418,6 @@ static const struct of_device_id sun4i_drv_of_table[] = {
{ .compatible = "allwinner,sun8i-a33-display-engine" },
{ .compatible = "allwinner,sun8i-a83t-display-engine" },
{ .compatible = "allwinner,sun8i-h3-display-engine" },
- { .compatible = "allwinner,sun8i-r40-display-engine" },
{ .compatible = "allwinner,sun8i-v3s-display-engine" },
{ .compatible = "allwinner,sun9i-a80-display-engine" },
{ }
diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c
index fc3713608f78..cb65b0ed53fd 100644
--- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
@@ -545,22 +545,6 @@ static const struct sun8i_mixer_cfg sun8i_h3_mixer0_cfg = {
.vi_num = 1,
};
-static const struct sun8i_mixer_cfg sun8i_r40_mixer0_cfg = {
- .ccsc = 0,
- .mod_rate = 297000000,
- .scaler_mask = 0xf,
- .ui_num = 3,
- .vi_num = 1,
-};
-
-static const struct sun8i_mixer_cfg sun8i_r40_mixer1_cfg = {
- .ccsc = 1,
- .mod_rate = 297000000,
- .scaler_mask = 0x3,
- .ui_num = 1,
- .vi_num = 1,
-};
-
static const struct sun8i_mixer_cfg sun8i_v3s_mixer_cfg = {
.vi_num = 2,
.ui_num = 1,
@@ -582,14 +566,6 @@ static const struct of_device_id sun8i_mixer_of_table[] = {
.compatible = "allwinner,sun8i-h3-de2-mixer-0",
.data = &sun8i_h3_mixer0_cfg,
},
- {
- .compatible = "allwinner,sun8i-r40-de2-mixer-0",
- .data = &sun8i_r40_mixer0_cfg,
- },
- {
- .compatible = "allwinner,sun8i-r40-de2-mixer-1",
- .data = &sun8i_r40_mixer1_cfg,
- },
{
.compatible = "allwinner,sun8i-v3s-de2-mixer",
.data = &sun8i_v3s_mixer_cfg,
diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
index 55fe398d8290..d5240b777a8f 100644
--- a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
+++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
@@ -253,7 +253,6 @@ static int sun8i_tcon_top_remove(struct platform_device *pdev)
/* sun4i_drv uses this list to check if a device node is a TCON TOP */
const struct of_device_id sun8i_tcon_top_of_table[] = {
- { .compatible = "allwinner,sun8i-r40-tcon-top" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sun8i_tcon_top_of_table);
--
2.18.0
next reply other threads:[~2018-08-27 8:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-27 8:39 Chen-Yu Tsai [this message]
2018-08-30 8:13 ` [PATCH] drm/sun4i: Remove R40 display pipeline compatibles Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180827083950.602-1-wens@csie.org \
--to=wens@csie.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox