[PATCH] ARM: dts: imx6ull: fix pinmux input_val for uart5 rx pin

[PATCH] ARM: dts: imx6ull: fix pinmux input_val for uart5 rx pin

[Heiko Schocher]

on the imx6ull the input_val for uart5 rx function
of pin MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
is 7 and not 5 as on the imx6ul. With this
patch, console on an imx6ull based board works
with uart5.

Signed-off-by: Heiko Schocher <hs@denx.de>

---

 arch/arm/boot/dts/imx6ull-pinfunc.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
index fdc46bb09cc1a..d835aeae5485b 100644
--- a/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -61,5 +61,6 @@
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX		0x00C0 0x034C 0x0644 0 7
 
 #endif /* __DTS_IMX6ULL_PINFUNC_H */
-- 
2.14.4

[PATCH] ARM: dts: imx6ull: fix pinmux input_val for uart5 rx pin

[Sébastien Szymanski]

Hi,

On 08/30/2018 02:47 PM, Heiko Schocher wrote:
> on the imx6ull the input_val for uart5 rx function
> of pin MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
> is 7 and not 5 as on the imx6ul. With this
> patch, console on an imx6ull based board works
> with uart5.
> 
> Signed-off-by: Heiko Schocher <hs@denx.de>

This is already fixed on v4.19-rc1 and also on a few others PADs that
have similar issue.
Moreover signals common for both i.MX6UL and i.MX6ULL should have
IMX6UL_ as prefix:

https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/commit/?h=for-next&id=387301d5b88e2fe91de9baf4ca25f771cc633f70

Regards,

> 
> ---
> 
>  arch/arm/boot/dts/imx6ull-pinfunc.h | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
> index fdc46bb09cc1a..d835aeae5485b 100644
> --- a/arch/arm/boot/dts/imx6ull-pinfunc.h
> +++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
> @@ -61,5 +61,6 @@
>  #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
>  #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
>  #define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
> +#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX		0x00C0 0x034C 0x0644 0 7
>  
>  #endif /* __DTS_IMX6ULL_PINFUNC_H */
> 


-- 
S?bastien Szymanski
Software engineer, Armadeus Systems
Tel: +33 (0)9 72 29 41 44
Fax: +33 (0)9 72 28 79 26

[PATCH] ARM: dts: imx6ull: fix pinmux input_val for uart5 rx pin

[Heiko Schocher]

Hello S?bastien,

Am 30.08.2018 um 15:25 schrieb S?bastien Szymanski:
> Hi,
> 
> On 08/30/2018 02:47 PM, Heiko Schocher wrote:
>> on the imx6ull the input_val for uart5 rx function
>> of pin MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
>> is 7 and not 5 as on the imx6ul. With this
>> patch, console on an imx6ull based board works
>> with uart5.
>>
>> Signed-off-by: Heiko Schocher <hs@denx.de>
> 
> This is already fixed on v4.19-rc1 and also on a few others PADs that
> have similar issue.
> Moreover signals common for both i.MX6UL and i.MX6ULL should have
> IMX6UL_ as prefix:
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/commit/?h=for-next&id=387301d5b88e2fe91de9baf4ca25f771cc633f70

My patch was based on current HEAD ...Ah, got it, this patch is in
"for-next"

Thanks! And sorry for the noise.

bye,
Heiko
> 
> Regards,
> 
>>
>> ---
>>
>>   arch/arm/boot/dts/imx6ull-pinfunc.h | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
>> index fdc46bb09cc1a..d835aeae5485b 100644
>> --- a/arch/arm/boot/dts/imx6ull-pinfunc.h
>> +++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
>> @@ -61,5 +61,6 @@
>>   #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
>>   #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
>>   #define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
>> +#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX		0x00C0 0x034C 0x0644 0 7
>>   
>>   #endif /* __DTS_IMX6ULL_PINFUNC_H */
>>
> 
> 

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de