From mboxrd@z Thu Jan 1 00:00:00 1970 From: embed3d@gmail.com (Philipp Rossak) Date: Thu, 30 Aug 2018 17:44:50 +0200 Subject: [PATCH v3 02/30] mfd: Kconfig: Remove MFD_SUN4I_GPADC config option In-Reply-To: <20180830154518.29507-1-embed3d@gmail.com> References: <20180830154518.29507-1-embed3d@gmail.com> Message-ID: <20180830154518.29507-3-embed3d@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org We are merging the mfd:sun4i-gpadc driver into the iio/adc/sun4i-gpadc driver. So we need to remove the MFD_SUN4I_GPADC config option. Signed-off-by: Philipp Rossak --- drivers/mfd/Kconfig | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b860eb5aa194..c7ab57d65610 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -40,23 +40,6 @@ config MFD_ACT8945A linear regulators, along with a complete ActivePath battery charger. -config MFD_SUN4I_GPADC - tristate "Allwinner sunxi platforms' GPADC MFD driver" - select MFD_CORE - select REGMAP_MMIO - select REGMAP_IRQ - depends on ARCH_SUNXI || COMPILE_TEST - depends on !TOUCHSCREEN_SUN4I - help - Select this to get support for Allwinner SoCs (A10, A13 and A31) ADC. - This driver will only map the hardware interrupt and registers, you - have to select individual drivers based on this MFD to be able to use - the ADC or the thermal sensor. This will try to probe the ADC driver - sun4i-gpadc-iio and the hwmon driver iio_hwmon. - - To compile this driver as a module, choose M here: the module will be - called sun4i-gpadc. - config MFD_AS3711 bool "AMS AS3711" select MFD_CORE -- 2.11.0