From: digetx@gmail.com (Dmitry Osipenko)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 5/8] ARM: tegra: Don't apply CPU erratas in insecure mode
Date: Thu, 30 Aug 2018 21:04:18 +0300 [thread overview]
Message-ID: <20180830180421.6415-6-digetx@gmail.com> (raw)
In-Reply-To: <20180830180421.6415-1-digetx@gmail.com>
CPU isn't allowed to touch secure registers while running under secure
monitor. Hence skip applying of CPU erratas in the reset handler if
Trusted Foundations firmware presents.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
arch/arm/mach-tegra/reset-handler.S | 24 ++++++++++++------------
arch/arm/mach-tegra/reset.c | 3 +++
arch/arm/mach-tegra/reset.h | 9 +++++++--
arch/arm/mach-tegra/sleep-tegra20.S | 4 ++++
4 files changed, 26 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index 805f306fa6f7..a9f13230da2f 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -29,8 +29,6 @@
#define PMC_SCRATCH41 0x140
-#define RESET_DATA(x) ((TEGRA_RESET_##x)*4)
-
#ifdef CONFIG_PM_SLEEP
/*
* tegra_resume
@@ -121,6 +119,12 @@ ENTRY(__tegra_cpu_reset_handler)
cpsid aif, 0x13 @ SVC mode, interrupts disabled
tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
+
+ adr r12, __tegra_cpu_reset_handler_data
+ ldr r5, [r12, #RESET_DATA(TF_PRESENT)]
+ cmp r5, #0
+ bne after_errata
+
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
t20_check:
cmp r6, #TEGRA20
@@ -155,7 +159,6 @@ after_errata:
and r10, r10, #0x3 @ R10 = CPU number
mov r11, #1
mov r11, r11, lsl r10 @ R11 = CPU mask
- adr r12, __tegra_cpu_reset_handler_data
#ifdef CONFIG_SMP
/* Does the OS know about this CPU? */
@@ -169,10 +172,9 @@ after_errata:
cmp r6, #TEGRA20
bne 1f
/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
- mov32 r5, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET
mov r0, #CPU_NOT_RESETTABLE
cmp r10, #0
- strneb r0, [r5, #__tegra20_cpu1_resettable_status_offset]
+ strneb r0, [r12, #RESET_DATA(RESETTABLE_STATUS)]
1:
#endif
@@ -277,14 +279,12 @@ ENDPROC(__tegra_cpu_reset_handler)
.align L1_CACHE_SHIFT
.type __tegra_cpu_reset_handler_data, %object
.globl __tegra_cpu_reset_handler_data
+ .globl __tegra_cpu_reset_handler_data_offset
+ .equ __tegra_cpu_reset_handler_data_offset, \
+ . - __tegra_cpu_reset_handler_start
__tegra_cpu_reset_handler_data:
- .rept TEGRA_RESET_DATA_SIZE
- .long 0
+ .rept TEGRA_RESET_DATA_SIZE
+ .long 0
.endr
- .globl __tegra20_cpu1_resettable_status_offset
- .equ __tegra20_cpu1_resettable_status_offset, \
- . - __tegra_cpu_reset_handler_start
- .byte 0
.align L1_CACHE_SHIFT
-
ENTRY(__tegra_cpu_reset_handler_end)
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index dc558892753c..b02ae7699842 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -24,6 +24,7 @@
#include <asm/cacheflush.h>
#include <asm/firmware.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/trusted_foundations.h>
#include "iomap.h"
#include "irammap.h"
@@ -89,6 +90,8 @@ static void __init tegra_cpu_reset_handler_enable(void)
void __init tegra_cpu_reset_handler_init(void)
{
+ __tegra_cpu_reset_handler_data[TEGRA_RESET_TF_PRESENT] =
+ trusted_foundations_registered();
#ifdef CONFIG_SMP
__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] =
diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h
index 9c479c7925b8..db0e6b3097ab 100644
--- a/arch/arm/mach-tegra/reset.h
+++ b/arch/arm/mach-tegra/reset.h
@@ -25,7 +25,11 @@
#define TEGRA_RESET_STARTUP_SECONDARY 3
#define TEGRA_RESET_STARTUP_LP2 4
#define TEGRA_RESET_STARTUP_LP1 5
-#define TEGRA_RESET_DATA_SIZE 6
+#define TEGRA_RESET_RESETTABLE_STATUS 6
+#define TEGRA_RESET_TF_PRESENT 7
+#define TEGRA_RESET_DATA_SIZE 8
+
+#define RESET_DATA(x) ((TEGRA_RESET_##x)*4)
#ifndef __ASSEMBLY__
@@ -49,7 +53,8 @@ void __tegra_cpu_reset_handler_end(void);
(u32)__tegra_cpu_reset_handler_start)))
#define tegra20_cpu1_resettable_status \
(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
- (u32)__tegra20_cpu1_resettable_status_offset))
+ ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_RESETTABLE_STATUS] - \
+ (u32)__tegra_cpu_reset_handler_start)))
#endif
#define tegra_cpu_reset_handler_offset \
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index 5c8e638ee51a..11f423e4a263 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -28,6 +28,7 @@
#include <asm/cache.h>
#include "irammap.h"
+#include "reset.h"
#include "sleep.h"
#define EMC_CFG 0xc
@@ -54,6 +55,9 @@
#define APB_MISC_XM2CFGCPADCTRL2 0x8e4
#define APB_MISC_XM2CFGDPADCTRL2 0x8e8
+#define __tegra20_cpu1_resettable_status_offset \
+ (__tegra_cpu_reset_handler_data_offset + RESET_DATA(RESETTABLE_STATUS))
+
.macro pll_enable, rd, r_car_base, pll_base
ldr \rd, [\r_car_base, #\pll_base]
tst \rd, #(1 << 30)
--
2.18.0
next prev parent reply other threads:[~2018-08-30 18:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-30 18:04 [PATCH v3 0/8] Support Trusted Foundations firmware on Tegra30 Dmitry Osipenko
2018-08-30 18:04 ` [PATCH v3 1/8] ARM: trusted_foundations: Implement L2 cache initialization callback Dmitry Osipenko
2018-08-30 18:04 ` [PATCH v3 2/8] ARM: trusted_foundations: Make prepare_idle call to take mode argument Dmitry Osipenko
2018-08-30 18:04 ` [PATCH v3 3/8] ARM: trusted_foundations: Provide information about whether firmware is registered Dmitry Osipenko
2018-08-30 18:04 ` [PATCH v3 4/8] ARM: tegra: Setup L2 cache using Trusted Foundations firmware Dmitry Osipenko
2018-08-30 18:04 ` Dmitry Osipenko [this message]
2018-08-30 18:04 ` [PATCH v3 6/8] ARM: tegra: Always boot CPU in ARM-mode Dmitry Osipenko
2018-08-30 18:04 ` [PATCH v3 7/8] ARM: tegra: Support L2 cache maintenance done via firmware Dmitry Osipenko
2018-08-30 18:04 ` [PATCH v3 8/8] ARM: tegra: Add firmware calls required for suspend-resume Dmitry Osipenko
2018-10-15 12:34 ` [PATCH v3 0/8] Support Trusted Foundations firmware on Tegra30 Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180830180421.6415-6-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).