From: maxime.ripard@bootlin.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 12/13] ARM: dts: sun4i: a10: add sata-port/sata-phy nodes
Date: Fri, 31 Aug 2018 09:37:24 +0200 [thread overview]
Message-ID: <20180831073724.kuw5tb6yypb4pmkp@flea> (raw)
In-Reply-To: <20180830190120.722-13-clabbe.montjoie@gmail.com>
On Thu, Aug 30, 2018 at 09:01:19PM +0200, Corentin Labbe wrote:
> This patch convert sun4i-a10 sata to the new binding which use a sata
> phy node.
>
> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> ---
> arch/arm/boot/dts/sun4i-a10.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
> index 3d62a8950720..52d5c2e79499 100644
> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> @@ -556,7 +556,20 @@
> reg = <0x01c18000 0x1000>;
> interrupts = <56>;
> clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> +
> + sata_port: sata-port at 0 {
> + reg = <0>;
> + phys = <&sata_phy>;
> + };
> + };
> +
> + sata_phy: sata_phy at 1c180c0 {
> + compatible = "allwinner,sun4i-a10-sata-phy";
> + reg = <0x01c180c0 0x200>;
> + #phy-cells = <0>;
> };
This patch, together with the following one, breaks the DT ABI, this
isn't something we can do anymore.
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180831/82065222/attachment.sig>
next prev parent reply other threads:[~2018-08-31 7:37 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-30 19:01 [PATCH v4 00/13] ata: ahci_platform: support allwinner R40 AHCI Corentin Labbe
2018-08-30 19:01 ` [PATCH v4 01/13] dt-bindings: ata: ahci-platform: fix indentation of target-supply Corentin Labbe
2018-08-30 19:01 ` [PATCH v4 02/13] ata: ahci_platform: add support for AHCI controller regulator Corentin Labbe
2018-08-30 19:01 ` [PATCH v4 03/13] dt-bindings: ata: ahci-platform: document ahci-supply Corentin Labbe
2018-08-30 19:01 ` [PATCH v4 04/13] phy: Add sun4i-a10-phy-sata driver Corentin Labbe
2018-08-30 19:01 ` [PATCH v4 05/13] dt-bindings: phy: document sun4i-a10-sata-phy Corentin Labbe
2018-08-30 19:01 ` [PATCH v4 06/13] dt-bindings: ata: update ahci_sunxi bindings Corentin Labbe
2018-08-30 19:01 ` [PATCH v4 07/13] ata: ahci_sunxi: Bypass PHY init when using the new binding Corentin Labbe
2018-08-30 19:01 ` [PATCH v4 08/13] ata: ahci_sunxi: add support for r40 Corentin Labbe
2018-08-30 19:01 ` [PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node Corentin Labbe
2018-08-31 7:35 ` Maxime Ripard
2018-08-31 7:56 ` Corentin Labbe
2018-08-31 7:58 ` Chen-Yu Tsai
2018-08-31 9:29 ` Corentin Labbe
2018-08-31 11:10 ` Chen-Yu Tsai
2018-08-31 12:57 ` Icenowy Zheng
2018-08-31 10:20 ` maxime.ripard at bootlin.com
2018-08-31 10:54 ` Corentin Labbe
2018-08-31 11:31 ` Chen-Yu Tsai
2018-08-31 12:08 ` Corentin Labbe
2018-08-31 12:58 ` Icenowy Zheng
2018-08-30 19:01 ` [PATCH v4 10/13] ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI Corentin Labbe
2018-08-30 19:01 ` [PATCH v4 11/13] ARM: dts: sun7i: a20: add sata-port/sata-phy nodes Corentin Labbe
2018-08-30 19:01 ` [PATCH v4 12/13] ARM: dts: sun4i: a10: " Corentin Labbe
2018-08-31 7:37 ` Maxime Ripard [this message]
2018-08-31 7:53 ` Corentin Labbe
2018-08-31 10:21 ` Maxime Ripard
2018-08-30 19:01 ` [PATCH v4 13/13 DONOTMERGE] ata: ahci_sunxi: remove PHY code Corentin Labbe
2018-08-30 20:27 ` Hans de Goede
2018-08-30 20:24 ` [PATCH v4 00/13] ata: ahci_platform: support allwinner R40 AHCI Hans de Goede
2018-08-30 20:31 ` Jens Axboe
2018-08-31 2:32 ` Chen-Yu Tsai
2018-08-31 2:52 ` Jens Axboe
2018-08-31 7:40 ` Maxime Ripard
2018-08-31 14:35 ` Jens Axboe
2018-09-03 8:31 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180831073724.kuw5tb6yypb4pmkp@flea \
--to=maxime.ripard@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox