From mboxrd@z Thu Jan  1 00:00:00 1970
From: clabbe.montjoie@gmail.com (Corentin Labbe)
Date: Fri, 31 Aug 2018 09:53:50 +0200
Subject: [PATCH v4 12/13] ARM: dts: sun4i: a10: add sata-port/sata-phy
 nodes
In-Reply-To: <20180831073724.kuw5tb6yypb4pmkp@flea>
References: <20180830190120.722-1-clabbe.montjoie@gmail.com>
 <20180830190120.722-13-clabbe.montjoie@gmail.com>
 <20180831073724.kuw5tb6yypb4pmkp@flea>
Message-ID: <20180831075350.GA16301@Red>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Fri, Aug 31, 2018 at 09:37:24AM +0200, Maxime Ripard wrote:
> On Thu, Aug 30, 2018 at 09:01:19PM +0200, Corentin Labbe wrote:
> > This patch convert sun4i-a10 sata to the new binding which use a sata
> > phy node.
> > 
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > ---
> >  arch/arm/boot/dts/sun4i-a10.dtsi | 13 +++++++++++++
> >  1 file changed, 13 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
> > index 3d62a8950720..52d5c2e79499 100644
> > --- a/arch/arm/boot/dts/sun4i-a10.dtsi
> > +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> > @@ -556,7 +556,20 @@
> >  			reg = <0x01c18000 0x1000>;
> >  			interrupts = <56>;
> >  			clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> >  			status = "disabled";
> > +
> > +			sata_port: sata-port at 0 {
> > +				reg = <0>;
> > +				phys = <&sata_phy>;
> > +			};
> > +		};
> > +
> > +		sata_phy: sata_phy at 1c180c0 {
> > +			compatible = "allwinner,sun4i-a10-sata-phy";
> > +			reg = <0x01c180c0 0x200>;
> > +			#phy-cells = <0>;
> >  		};
> 
> This patch, together with the following one, breaks the DT ABI, this
> isn't something we can do anymore.
> 

So what can I do ?
Keep the DT in place and drop the patch 13 like wens suggested ?

Regards