From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Fri, 7 Sep 2018 15:23:11 +0200 Subject: [PATCH v10 0/2] Initial Allwinner V3s CSI Support In-Reply-To: References: <20180517090224.u3ygdzjr77im2mmp@flea> <20180529095757.qkz7jyuxza7movbc@flea.home> <20180530091934.tbd6xbyr5s3ipn3v@paasikivi.fi.intel.com> Message-ID: <20180907132311.g7q3zzziiagqecae@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Yong, On Wed, Jun 20, 2018 at 12:45:03PM +0800, Chen-Yu Tsai wrote: > On Wed, May 30, 2018 at 5:19 PM, Sakari Ailus > wrote: > > On Tue, May 29, 2018 at 11:57:57AM +0200, Maxime Ripard wrote: > >> On Thu, May 17, 2018 at 11:02:24AM +0200, Maxime Ripard wrote: > >> > On Fri, May 04, 2018 at 02:44:08PM +0800, Yong Deng wrote: > >> > > This patchset add initial support for Allwinner V3s CSI. > >> > > > >> > > Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2 > >> > > interface and CSI1 is used for parallel interface. This is not > >> > > documented in datasheet but by test and guess. > >> > > > >> > > This patchset implement a v4l2 framework driver and add a binding > >> > > documentation for it. > >> > > > >> > > Currently, the driver only support the parallel interface. And has been > >> > > tested with a BT1120 signal which generating from FPGA. The following > >> > > fetures are not support with this patchset: > >> > > - ISP > >> > > - MIPI-CSI2 > >> > > - Master clock for camera sensor > >> > > - Power regulator for the front end IC > >> > > >> > I tested it on my H3 with a parallel camera, and it still works. Thanks! > >> > > >> > Hans, Sakari, any chance this might land in 4.18? > >> > >> Ping? > > > > I'll try to look into this soonish but it seems to be too late for 4.18. > > Sorry about that. > > Can we get this into 4.19? Did you have some time to make the changes Sakari asked for? That would be great to have it in 4.20. Thanks! Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: