From mboxrd@z Thu Jan 1 00:00:00 1970 From: robh@kernel.org (Rob Herring) Date: Mon, 10 Sep 2018 13:18:00 -0500 Subject: [PATCH v5 5/9] dt-bindings: ata: ahci-platform: document phy-supply In-Reply-To: <20180903100201.23131-6-clabbe.montjoie@gmail.com> References: <20180903100201.23131-1-clabbe.montjoie@gmail.com> <20180903100201.23131-6-clabbe.montjoie@gmail.com> Message-ID: <20180910181800.GA9759@bogus> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Sep 03, 2018 at 12:01:57PM +0200, Corentin Labbe wrote: > This patch document the new optional phy-supply. > > Signed-off-by: Corentin Labbe > --- > Documentation/devicetree/bindings/ata/ahci-platform.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt > index f495774c8af9..45b451961612 100644 > --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt > +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt > @@ -31,6 +31,7 @@ Optional properties: > - clocks : a list of phandle + clock specifier pairs > - resets : a list of phandle + reset specifier pairs > - target-supply : regulator for SATA target power > +- phy-supply : regulator for PHY power This should be mutually exclusive with the phys property. If you have a phy node, then its supply belongs there. > - phys : reference to the SATA PHY node > - phy-names : must be "sata-phy" > - ahci-supply : regulator for AHCI controller > -- > 2.16.4 >