* [PATCH] ARM: dts: imx53-qsb: disable 1.2GHz OPP
@ 2018-09-10 12:50 Sascha Hauer
2018-09-12 1:22 ` Shawn Guo
2018-09-12 6:23 ` [PATCH v2] " Sascha Hauer
0 siblings, 2 replies; 6+ messages in thread
From: Sascha Hauer @ 2018-09-10 12:50 UTC (permalink / raw)
To: linux-arm-kernel
The maximum CPU frequency for the i.MX53 QSB is 1GHz, so disable the
1.2GHz OPP. This makes the board work with cpufreq again.
Fixes: 791f416608 ("ARM: dts: imx53: add cpufreq-dt support")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boot/dts/imx53-qsb-common.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 7423d462d1e4..50dde84b72ed 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -123,6 +123,17 @@
};
};
+&cpu0 {
+ /* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+ operating-points = <
+ /* kHz uV */
+ 166666 850000
+ 400000 900000
+ 800000 1050000
+ 1000000 1200000
+ >;
+};
+
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
--
2.18.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] ARM: dts: imx53-qsb: disable 1.2GHz OPP
2018-09-10 12:50 [PATCH] ARM: dts: imx53-qsb: disable 1.2GHz OPP Sascha Hauer
@ 2018-09-12 1:22 ` Shawn Guo
2018-09-12 6:23 ` Sascha Hauer
2018-09-12 6:23 ` [PATCH v2] " Sascha Hauer
1 sibling, 1 reply; 6+ messages in thread
From: Shawn Guo @ 2018-09-12 1:22 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Sep 10, 2018 at 02:50:56PM +0200, Sascha Hauer wrote:
> The maximum CPU frequency for the i.MX53 QSB is 1GHz, so disable the
> 1.2GHz OPP. This makes the board work with cpufreq again.
I feel that the word 'again' and the Fixes tag below are a little
confusing. It makes impression that cpufreq worked fine on the board
before and commit 791f416608 broke it. However, this is not the case,
right?
>
> Fixes: 791f416608 ("ARM: dts: imx53: add cpufreq-dt support")
Shawn
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> arch/arm/boot/dts/imx53-qsb-common.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
> index 7423d462d1e4..50dde84b72ed 100644
> --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
> +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
> @@ -123,6 +123,17 @@
> };
> };
>
> +&cpu0 {
> + /* CPU rated to 1GHz, not 1.2GHz as per the default settings */
> + operating-points = <
> + /* kHz uV */
> + 166666 850000
> + 400000 900000
> + 800000 1050000
> + 1000000 1200000
> + >;
> +};
> +
> &esdhc1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_esdhc1>;
> --
> 2.18.0
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2] ARM: dts: imx53-qsb: disable 1.2GHz OPP
2018-09-10 12:50 [PATCH] ARM: dts: imx53-qsb: disable 1.2GHz OPP Sascha Hauer
2018-09-12 1:22 ` Shawn Guo
@ 2018-09-12 6:23 ` Sascha Hauer
2018-09-12 6:45 ` Shawn Guo
1 sibling, 1 reply; 6+ messages in thread
From: Sascha Hauer @ 2018-09-12 6:23 UTC (permalink / raw)
To: linux-arm-kernel
The maximum CPU frequency for the i.MX53 QSB is 1GHz, so disable the
1.2GHz OPP. This makes the board work again with configs that have
cpufreq enabled like imx_v6_v7_defconfig on which the board stopped
working with the addition of cpufreq-dt support.
Fixes: 791f416608 ("ARM: dts: imx53: add cpufreq-dt support")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
Changes since v1:
- rephrase commit message
arch/arm/boot/dts/imx53-qsb-common.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 7423d462d1e4..50dde84b72ed 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -123,6 +123,17 @@
};
};
+&cpu0 {
+ /* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+ operating-points = <
+ /* kHz uV */
+ 166666 850000
+ 400000 900000
+ 800000 1050000
+ 1000000 1200000
+ >;
+};
+
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
--
2.18.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] ARM: dts: imx53-qsb: disable 1.2GHz OPP
2018-09-12 1:22 ` Shawn Guo
@ 2018-09-12 6:23 ` Sascha Hauer
2018-09-12 6:46 ` Shawn Guo
0 siblings, 1 reply; 6+ messages in thread
From: Sascha Hauer @ 2018-09-12 6:23 UTC (permalink / raw)
To: linux-arm-kernel
Hi Shawn,
On Wed, Sep 12, 2018 at 09:22:54AM +0800, Shawn Guo wrote:
> On Mon, Sep 10, 2018 at 02:50:56PM +0200, Sascha Hauer wrote:
> > The maximum CPU frequency for the i.MX53 QSB is 1GHz, so disable the
> > 1.2GHz OPP. This makes the board work with cpufreq again.
>
> I feel that the word 'again' and the Fixes tag below are a little
> confusing. It makes impression that cpufreq worked fine on the board
> before and commit 791f416608 broke it. However, this is not the case,
> right?
You're right, the "again" shouldn't be there. I meant that the board
works "again" after the addition of cpufreq support broke it.
Just resent the patch with a rephrased commit message.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2] ARM: dts: imx53-qsb: disable 1.2GHz OPP
2018-09-12 6:23 ` [PATCH v2] " Sascha Hauer
@ 2018-09-12 6:45 ` Shawn Guo
0 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2018-09-12 6:45 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Sep 12, 2018 at 08:23:01AM +0200, Sascha Hauer wrote:
> The maximum CPU frequency for the i.MX53 QSB is 1GHz, so disable the
> 1.2GHz OPP. This makes the board work again with configs that have
> cpufreq enabled like imx_v6_v7_defconfig on which the board stopped
> working with the addition of cpufreq-dt support.
>
> Fixes: 791f416608 ("ARM: dts: imx53: add cpufreq-dt support")
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Applied, thanks.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: dts: imx53-qsb: disable 1.2GHz OPP
2018-09-12 6:23 ` Sascha Hauer
@ 2018-09-12 6:46 ` Shawn Guo
0 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2018-09-12 6:46 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Sep 12, 2018 at 08:23:35AM +0200, Sascha Hauer wrote:
> Hi Shawn,
>
> On Wed, Sep 12, 2018 at 09:22:54AM +0800, Shawn Guo wrote:
> > On Mon, Sep 10, 2018 at 02:50:56PM +0200, Sascha Hauer wrote:
> > > The maximum CPU frequency for the i.MX53 QSB is 1GHz, so disable the
> > > 1.2GHz OPP. This makes the board work with cpufreq again.
> >
> > I feel that the word 'again' and the Fixes tag below are a little
> > confusing. It makes impression that cpufreq worked fine on the board
> > before and commit 791f416608 broke it. However, this is not the case,
> > right?
>
> You're right, the "again" shouldn't be there. I meant that the board
> works "again" after the addition of cpufreq support broke it.
>
> Just resent the patch with a rephrased commit message.
Thanks, Sascha.
Shawn
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-09-12 6:46 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-09-10 12:50 [PATCH] ARM: dts: imx53-qsb: disable 1.2GHz OPP Sascha Hauer
2018-09-12 1:22 ` Shawn Guo
2018-09-12 6:23 ` Sascha Hauer
2018-09-12 6:46 ` Shawn Guo
2018-09-12 6:23 ` [PATCH v2] " Sascha Hauer
2018-09-12 6:45 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).