From mboxrd@z Thu Jan 1 00:00:00 1970 From: leo.yan@linaro.org (leo.yan at linaro.org) Date: Wed, 12 Sep 2018 18:17:53 +0800 Subject: [PATCH 04/11] dts: qcom: Update coresight bindings for hardware ports In-Reply-To: <1536661032-30481-5-git-send-email-suzuki.poulose@arm.com> References: <1536661032-30481-1-git-send-email-suzuki.poulose@arm.com> <1536661032-30481-5-git-send-email-suzuki.poulose@arm.com> Message-ID: <20180912101753.GB3353@leoy-ThinkPad-X240s> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Suzuki, On Tue, Sep 11, 2018 at 11:17:05AM +0100, Suzuki K Poulose wrote: > Switch to updated coresight bindings for hw ports > > Cc: Andy Gross > Cc: David Brown > Cc: Ivan T. Ivanov > Cc: Mathieu Poirier > Signed-off-by: Suzuki K Poulose > --- > arch/arm64/boot/dts/qcom/msm8916.dtsi | 98 ++++++++++++++++++++++------------- > 1 file changed, 63 insertions(+), 35 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi > index 7b32b89..5bed52b 100644 > --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi > @@ -1099,10 +1099,11 @@ > clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; > clock-names = "apb_pclk", "atclk"; > > - port { > - tpiu_in: endpoint { > - slave-mode; > - remote-endpoint = <&replicator_out1>; > + out-ports { Here should be in-ports for tpiu node? BTW, if upper comment is valid, this means the DT binding doc also gives wrong example for tpiu node [1]. I tested this patch with upper changing to 'in-ports', etm with perf mode can work well on DB410c board. [...] Thanks, Leo Yan [1] https://git.linaro.org/kernel/coresight.git/tree/Documentation/devicetree/bindings/arm/coresight.txt?h=next#n135