From: jae.hyun.yoo@linux.intel.com (Jae Hyun Yoo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 05/12] ARM: dts: aspeed: peci: Add PECI node
Date: Tue, 18 Sep 2018 14:51:17 -0700 [thread overview]
Message-ID: <20180918215124.14003-6-jae.hyun.yoo@linux.intel.com> (raw)
In-Reply-To: <20180918215124.14003-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI bus/adapter node of AST24xx/AST25xx into
aspeed-g4 and aspeed-g5.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 26 ++++++++++++++++++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 26 ++++++++++++++++++++++++++
2 files changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b23a983f95a5..ba31b2f0e0d8 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -29,6 +29,7 @@
serial3 = &uart4;
serial4 = &uart5;
serial5 = &vuart;
+ peci0 = &peci0;
};
cpus {
@@ -317,6 +318,13 @@
};
};
+ peci: bus at 1e78b000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e78b000 0x60>;
+ };
+
uart2: serial at 1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
@@ -360,6 +368,24 @@
};
};
+&peci {
+ peci0: peci-bus at 0 {
+ compatible = "aspeed,ast2400-peci";
+ reg = <0x0 0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ clock-frequency = <24000000>;
+ msg-timing = <1>;
+ addr-timing = <1>;
+ rd-sampling-point = <8>;
+ cmd-timeout-ms = <1000>;
+ status = "disabled";
+ };
+};
+
&i2c {
i2c_ic: interrupt-controller at 0 {
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 87fdc146ff52..c93ab96131e6 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -29,6 +29,7 @@
serial3 = &uart4;
serial4 = &uart5;
serial5 = &vuart;
+ peci0 = &peci0;
};
cpus {
@@ -377,6 +378,13 @@
};
};
+ peci: bus at 1e78b000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e78b000 0x60>;
+ };
+
uart2: serial at 1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
@@ -420,6 +428,24 @@
};
};
+&peci {
+ peci0: peci-bus at 0 {
+ compatible = "aspeed,ast2500-peci";
+ reg = <0x0 0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ clock-frequency = <24000000>;
+ msg-timing = <1>;
+ addr-timing = <1>;
+ rd-sampling-point = <8>;
+ cmd-timeout-ms = <1000>;
+ status = "disabled";
+ };
+};
+
&i2c {
i2c_ic: interrupt-controller at 0 {
#interrupt-cells = <1>;
--
2.18.0
next prev parent reply other threads:[~2018-09-18 21:51 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-18 21:51 [PATCH v8 00/12] PECI device driver introduction Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 01/12] dt-bindings: Add a document of PECI subsystem Jae Hyun Yoo
2018-09-27 15:10 ` Rob Herring
2018-09-27 16:27 ` Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 02/12] Documentation: ioctl: Add ioctl numbers for " Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 04/12] dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs Jae Hyun Yoo
2018-09-18 21:51 ` Jae Hyun Yoo [this message]
2018-09-18 21:51 ` [PATCH v8 06/12] peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 07/12] dt-bindings: mfd: Add a document for PECI client MFD Jae Hyun Yoo
2018-09-27 15:15 ` Rob Herring
2018-09-27 16:28 ` Jae Hyun Yoo
2018-10-24 7:25 ` Lee Jones
2018-10-24 16:39 ` Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 08/12] mfd: intel-peci-client: Add PECI client MFD driver Jae Hyun Yoo
2018-10-24 10:59 ` Lee Jones
2018-10-24 21:10 ` Jae Hyun Yoo
2018-10-25 5:30 ` Lee Jones
2018-10-25 16:16 ` Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 09/12] Documentation: hwmon: Add documents for PECI hwmon client drivers Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 10/12] hwmon: Add PECI cputemp driver Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 11/12] hwmon: Add PECI dimmtemp driver Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 12/12] Add maintainers for the PECI subsystem Jae Hyun Yoo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180918215124.14003-6-jae.hyun.yoo@linux.intel.com \
--to=jae.hyun.yoo@linux.intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).