From mboxrd@z Thu Jan 1 00:00:00 1970 From: jae.hyun.yoo@linux.intel.com (Jae Hyun Yoo) Date: Tue, 18 Sep 2018 14:51:19 -0700 Subject: [PATCH v8 07/12] dt-bindings: mfd: Add a document for PECI client MFD In-Reply-To: <20180918215124.14003-1-jae.hyun.yoo@linux.intel.com> References: <20180918215124.14003-1-jae.hyun.yoo@linux.intel.com> Message-ID: <20180918215124.14003-8-jae.hyun.yoo@linux.intel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This commit adds a dt-bindings document for PECI client MFD. Cc: Lee Jones Cc: Rob Herring Cc: Mark Rutland Cc: Andrew Jeffery Cc: James Feist Cc: Jason M Biils Cc: Joel Stanley Cc: Vernon Mauery Signed-off-by: Jae Hyun Yoo --- .../bindings/mfd/intel-peci-client.txt | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/intel-peci-client.txt diff --git a/Documentation/devicetree/bindings/mfd/intel-peci-client.txt b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt new file mode 100644 index 000000000000..cb341e363add --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt @@ -0,0 +1,34 @@ +* Intel PECI client bindings + +PECI (Platform Environment Control Interface) is a one-wire bus interface that +provides a communication channel from PECI clients in Intel processors and +chipset components to external monitoring or control devices. PECI is designed +to support the following sideband functions: + +- Processor and DRAM thermal management +- Platform Manageability +- Processor Interface Tuning and Diagnostics +- Failure Analysis + +Required properties: +- compatible : Should be "intel,peci-client". +- reg : Should contain address of a client CPU. Address range of CPU + clients starts from 0x30 based on PECI specification. + +Example: + peci-bus at 0 { + compatible = "vendor,soc-peci"; + reg = <0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + peci-client at 30 { + compatible = "intel,peci-client"; + reg = <0x30>; + }; + + peci-client at 31 { + compatible = "intel,peci-client"; + reg = <0x31>; + }; + }; -- 2.18.0