From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Thu, 20 Sep 2018 14:41:47 +0200 Subject: [PATCH] ARM: dts: sun8i: sun8i-h3-nanopi-m1-plus: enable HDMI output In-Reply-To: <1537388051-39623-1-git-send-email-clabbe@baylibre.com> References: <1537388051-39623-1-git-send-email-clabbe@baylibre.com> Message-ID: <20180920124147.u2f72ygfch5my5sa@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi! On Wed, Sep 19, 2018 at 08:14:11PM +0000, Corentin Labbe wrote: > This patch enable HDMI output on sun8i-h3-nanopi-m1-plus. > > Signed-off-by: Corentin Labbe > --- > arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts > index 65cba1050802..88b5ff6b66b6 100644 > --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts > +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts > @@ -67,6 +67,21 @@ > pinctrl-names = "default"; > reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ > }; > + > + connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > +}; > + > +&de { > + status = "okay"; > }; > > &ehci1 { > @@ -94,6 +109,17 @@ > }; > }; > > +&hdmi { > + status = "okay"; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > + status = "okay"; you don't need that status property here Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: