From: bibby.hsieh@mediatek.com (Bibby Hsieh)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/13] drm/mediatek: support hdmi output for mt2701 and mt7623
Date: Fri, 21 Sep 2018 11:28:10 +0800 [thread overview]
Message-ID: <20180921032822.30771-1-bibby.hsieh@mediatek.com> (raw)
In order to support HDMI on mt2701,
we have to make some modifications.
1) Add the HDMI driver.
2) Add the DPI driver.
3) Add a mechanism that config output component by dts.
Changes since v2:
- Fix the typo in commit message.
- Remove const of reg_h_fre_con in the mtk_dpi_conf struct
- Remove unused error log
- Use lower casee for hex number
- Use common API which defined in mtk_hdmi_phy.c to reduce code size
- Implemet the enable/disable of phy_pll_ops the same as 8173
- Move the common header to mtk_hdmi_phy.h
- Remove the including of debugfs.h
NOTE:
- add description about thecoponent output in the binding document in v4.
Changes since v1:
- Separate some patches to independent patch.
- add DISP_REG_CONFIG_DSI_SEL and DISP_REG_CONFIG_DPI_SEL
configuration in the condition of BLS&DPI0 connection.
Changes since v0:
- Correct some typos in commit message.
- Fixup the build warning (tmp variable didn't be initialized)
Bibby Hsieh (3):
drm/mediatek: implement connection from BLS to DPI0
drm/mediatek: add a error return value when clock driver has been
prepared
drm/mediatek: config component output by device node port
chunhui dai (9):
drm/mediatek: add refcount for DPI power on/off
drm/mediatek: move hardware register to node data
drm/mediatek: adjust EDGE to match clock and data
drm/mediatek: add clock factor for different IC
drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge
drm/mediatek: add dpi driver for mt2701 and mt7623
drm/mediatek: separate hdmi phy to different file
drm/mediatek: add support for SPDIF audio in HDMI
drm/mediatek: add hdmi driver for MT2701 and MT7623
drivers/gpu/drm/mediatek/Makefile | 5 +-
drivers/gpu/drm/mediatek/mtk_dpi.c | 106 ++++++++---
drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 2 +-
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 14 +-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +-
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 39 ++++-
drivers/gpu/drm/mediatek/mtk_drm_drv.h | 4 +-
drivers/gpu/drm/mediatek/mtk_hdmi.c | 15 +-
drivers/gpu/drm/mediatek/mtk_hdmi.h | 2 +-
drivers/gpu/drm/mediatek/mtk_hdmi_phy.c | 213 ++++++++++++++++++++++
drivers/gpu/drm/mediatek/mtk_hdmi_phy.h | 56 ++++++
drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 234 +++++++++++++++++++++++++
drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 204 +--------------------
13 files changed, 661 insertions(+), 235 deletions(-)
create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
create mode 100644 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
--
2.12.5.2.gbdf23ab
next reply other threads:[~2018-09-21 3:28 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-21 3:28 Bibby Hsieh [this message]
2018-09-21 3:28 ` [PATCH v3 01/12] drm/mediatek: add refcount for DPI power on/off Bibby Hsieh
2018-09-21 6:18 ` CK Hu
2018-09-21 3:28 ` [PATCH v3 02/12] drm/mediatek: move hardware register to node data Bibby Hsieh
2018-09-21 7:39 ` CK Hu
2018-09-21 3:28 ` [PATCH v3 03/12] drm/mediatek: adjust EDGE to match clock and data Bibby Hsieh
2018-09-21 3:28 ` [PATCH v3 04/12] drm/mediatek: add clock factor for different IC Bibby Hsieh
2018-09-21 9:03 ` CK Hu
2018-09-21 3:28 ` [PATCH v3 05/12] drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge Bibby Hsieh
2018-09-21 9:47 ` CK Hu
2018-09-21 3:28 ` [PATCH v3 06/12] drm/mediatek: add dpi driver for mt2701 and mt7623 Bibby Hsieh
2018-09-21 9:50 ` CK Hu
2018-09-21 3:28 ` [PATCH v3 07/12] drm/mediatek: separate hdmi phy to different file Bibby Hsieh
2018-09-21 3:28 ` [PATCH v3 08/12] drm/mediatek: add support for SPDIF audio in HDMI Bibby Hsieh
2018-09-21 3:28 ` [PATCH v3 09/12] drm/mediatek: add hdmi driver for MT2701 and MT7623 Bibby Hsieh
2018-09-21 10:10 ` CK Hu
2018-09-21 3:28 ` [PATCH v3 10/12] drm/mediatek: implement connection from BLS to DPI0 Bibby Hsieh
2018-09-21 3:28 ` [PATCH v3 11/12] drm/mediatek: add a error return value when clock driver has been prepared Bibby Hsieh
2018-09-21 3:28 ` [PATCH v3 12/12] drm/mediatek: config component output by device node port Bibby Hsieh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180921032822.30771-1-bibby.hsieh@mediatek.com \
--to=bibby.hsieh@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox